Firewall is closed.The server was working fine just now same problem happened.
when i checked the log files /var/log/messages file.I found following. error.pls also see host.allow and hosts.deny file below. May 15 12:01:43 cemalighting xinetd[14995]: warning: /etc/hosts.allow, line 10: missing ":" separator May 15 12:01:43 cemalighting xinetd[14995]: warning: /etc/hosts.allow, line 11: missing ":" separator May 15 12:01:55 cemalighting xinetd[14297]: EXIT: telnet status=1 pid=14995 duration=12(sec) May 15 12:01:59 cemalighting xinetd[15099]: warning: /etc/hosts.allow, line 9: missing ":" separator May 15 12:01:59 cemalighting xinetd[15099]: warning: /etc/hosts.allow, line 10: missing ":" separator May 15 12:01:59 cemalighting xinetd[15099]: warning: /etc/hosts.allow, line 11: missing ":" separator May 15 12:01:59 cemalighting xinetd[14297]: START: telnet pid=15099 from=10.0.10.14 May 15 12:02:09 cemalighting xinetd[14297]: EXIT: telnet status=1 pid=15099 duration=10(sec) May 15 12:02:10 cemalighting xinetd[15211]: warning: /etc/hosts.allow, line 9: missing ":" separator May 15 12:02:10 cemalighting xinetd[15211]: warning: /etc/hosts.allow, line 10: missing ":" separator May 15 12:02:10 cemalighting xinetd[15211]: warning: /etc/hosts.allow, line 11: missing ":" separator May 15 12:02:10 cemalighting xinetd[14297]: START: telnet pid=15211 from=10.0.10.14 May 15 12:03:40 cemalighting xinetd[15646]: warning: /etc/hosts.allow, line 9: missing ":" separator May 15 12:03:40 cemalighting xinetd[15646]: warning: /etc/hosts.allow, line 10: missing ":" separator May 15 12:03:40 cemalighting xinetd[15646]: warning: /etc/hosts.allow, line 11: missing ":" separator May 15 12:03:40 cemalighting xinetd[14297]: START: telnet pid=15646 from=192.168.174.21 May 15 12:04:08 cemalighting xinetd[15837]: warning: /etc/hosts.allow, line 9: missing ":" separator May 15 12:04:08 cemalighting xinetd[15837]: warning: /etc/hosts.allow, line 10: missing ":" separator May 15 12:04:08 cemalighting xinetd[15837]: warning: /etc/hosts.allow, line 11: missing ":" separator May 15 12:04:08 cemalighting xinetd[14297]: START: telnet pid=15837 from=192.168.174.47 ----------------------------------------------------------------------------------------------------------------------------------- ay 15 11:59:42 cemalighting xinetd[13984]: Service telnet failed to start and is deactivated. May 15 11:59:52 cemalighting xinetd[13984]: START: telnet pid=14278 from=10.0.10.70 May 15 11:59:53 cemalighting xinetd[14297]: bind failed (Address already in use (errno = 98)). service = telnet May 15 11:59:53 cemalighting xinetd[14297]: Service telnet failed to start and is deactivated. May 15 11:59:57 cemalighting xinetd[14297]: START: telnet pid=14300 from=192.168.174.61 May 15 12:00:25 cemalighting xinetd[14297]: START: telnet pid=14482 from=10.165.2.51 May 15 12:00:48 cemalighting xinetd[14297]: START: telnet pid=14616 from=192.168.174.48 May 15 12:01:30 cemalighting xinetd[14297]: EXIT: telnet status=1 pid=14616 duration=42(sec) May 15 12:01:43 cemalighting xinetd[14297]: START: telnet pid=14995 from=10.0.10.14 May 15 12:01:55 cemalighting xinetd[14297]: EXIT: telnet status=1 pid=14995 duration=12(sec) May 15 12:01:59 cemalighting xinetd[14297]: START: telnet pid=15099 from=10.0.10.14 May 15 12:02:09 cemalighting xinetd[14297]: EXIT: telnet status=1 pid=15099 duration=10(sec) May 15 12:02:10 cemalighting xinetd[14297]: START: telnet pid=15211 from=10.0.10.14 May 15 12:03:40 cemalighting xinetd[14297]: START: telnet pid=15646 from=192.168.174.21 May 15 12:04:08 cemalighting xinetd[14297]: START: telnet pid=15837 from=192.168.174.47 May 15 12:05:18 cemalighting xinetd[14297]: EXIT: telnet status=1 pid=15211 duration=188(sec) May 15 12:05:35 cemalighting xinetd[14297]: START: telnet pid=16345 from=192.168.174.19 May 15 12:05:43 cemalighting xinetd[14297]: START: telnet pid=16393 from=192.168.174.48 May 15 12:05:46 cemalighting xinetd[14297]: START: telnet pid=16395 from=192.168.174.42 May 15 12:05:51 cemalighting xinetd[14297]: EXIT: telnet status=1 pid=16393 duration=8(sec) --------------------------------------------------------------------------------------------------------------------------- # hosts.deny This file describes the names of the hosts which are # *not* allowed to use the local INET services, as decided # by the '/usr/sbin/tcpd' server. # # The portmap line is redundant, but it is left to remind you that # the new secure portmap uses hosts.deny and hosts.allow. In particular # you should know that NFS uses portmap! "hosts.deny" 9L, 347C -------------------------------------------------------------------------------------------------------------- # hosts.allow This file describes the names of the hosts which are # allowed to use the local INET services, as decided # by the '/usr/sbin/tcpd' server. # 192.168.174.0/24 10.165.2.1/24 10.0.10.0/24 ~ ~ "hosts.allow" 11L, 207C Thanks and regards Arun.v On Sun, May 10, 2009 at 12:20 PM, Syam Krishnan <sya...@gmail.com> wrote: > > Arun v vempan wrote: > > it also affected network service.I started xinetd service and checked > > using chconfig.I took setup and stopped some services i dont know > > exactly which srrvices i stopped. > On which machine did you meddle with the services? Try stooping the > firewall on the machine you are trying to connect to. > > Syam > > > > --~--~---------~--~----~------------~-------~--~----~ "Freedom is the only law". "Freedom Unplugged" http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups "ilug-tvm" group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~----------~----~----~----~------~----~------~--~---
