On Wed, Mar 7, 2012 at 12:42 PM, Yuvaraj <yuvali...@gmail.com> wrote:
> I have a slight issue on our server. > > I have added some extra storage on an Infortrend Raid – the disks show up > on boot up and is assigned by the system. Given this is a hardware raid controller, you probably noticed the disk 'showing up' on the raid controller utility menu just before the OS is booted. correct? > Now when in LVM manager the disks > don't show up. I have included the part of the boot message so you can see > the disk assignment. > Usually, with a hardware raid controller, you don't get to access to the underlying disks*. You will instead see unified disk(s). * unless you also have some kind of a specialized software (such as HP ACU CLI) using which you can 'talk' to the raid controller to query various things from it (such as the list of drives installed, their status, etc.,). Some raid controllers do support 'direct disk' mode, but you have to check with your RAID hardware's manual. regards, -Suraj -- Career Gear - Industry Driven Talent Factory http://careergear.in/ _______________________________________________ ILUGC Mailing List: http://www.ae.iitm.ac.in/mailman/listinfo/ilugc