Hi,
I am having a BSNL EVDO (Prithvi) modem in Chennai and I am unable to
connect to the Internet. I am using Ubuntu 12.04 LTS 64 Bit.
The wvdial.conf is as follows,
cat /etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
ISDN = 0
New PPPD = yes
Phone = 9183006292
Modem = /dev/ttyACM0
Username = 91********@aaabg.in
Password = 91********
Baud = 460800
I am using GNOMEPPP to detect the device. The phone number was
entered as *99#
I got the following output on the console.
GNOME PPP: STDERR: Modem Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6
S7
GNOME PPP: STDOUT:
GNOME PPP: STDERR: Modem Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14
S15
GNOME PPP: STDOUT: Scanning your serial ports for a modem.
GNOME PPP: STDERR: Modem Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22
S23
GNOME PPP: STDOUT:
GNOME PPP: STDERR: Modem Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30
S31
GNOME PPP: STDERR: WvModem<*1>: Cannot get information for serial port.
GNOME PPP: STDERR: ttyACM0<*1>: ATQ0 V1 E1 -- OK
GNOME PPP: STDERR: ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
GNOME PPP: STDERR: ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
GNOME PPP: STDERR: ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
GNOME PPP: STDERR: ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
GNOME PPP: STDERR: ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
GNOME PPP: STDERR: ttyACM0<*1>: Modem Identifier: ATI -- Manufacturer:
+GMI: VIA TeleCom
GNOME PPP: STDERR: ttyACM0<*1>: Speed 4800: AT -- OK
GNOME PPP: STDERR: ttyACM0<*1>: Speed 9600: AT -- OK
GNOME PPP: STDERR: ttyACM0<*1>: Speed 19200: AT -- OK
GNOME PPP: STDERR: ttyACM0<*1>: Speed 38400: AT -- OK
GNOME PPP: STDERR: ttyACM0<*1>: Speed 57600: AT -- OK
GNOME PPP: STDERR: ttyACM0<*1>: Speed 115200: AT -- OK
GNOME PPP: STDERR: ttyACM0<*1>: Speed 230400: AT -- OK
GNOME PPP: STDERR: ttyACM0<*1>: Speed 460800: AT -- OK
GNOME PPP: STDERR: ttyACM0<*1>: Max speed is 460800; that should be safe.
GNOME PPP: STDERR: ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
GNOME PPP: STDOUT:
GNOME PPP: STDOUT: Found an USB modem on /dev/ttyACM0.
GNOME PPP: STDOUT: Modem configuration written to /dev/null.
GNOME PPP: STDERR: ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1
&D2 +FCLASS=0"
Now when I choose the 'connect' option of GNOME-PPP, I am getting the
following output on the console.
GNOME PPP: Connecting...
GNOME PPP: STDERR: --> WvDial: Internet dialer version 1.61
GNOME PPP: STDERR: --> Cannot get information for serial port.
GNOME PPP: STDERR: --> Initializing modem.
GNOME PPP: STDERR: --> Sending: ATZ
GNOME PPP: STDERR: ATZ
GNOME PPP: STDERR: OK
GNOME PPP: STDERR: --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
GNOME PPP: STDERR: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
GNOME PPP: STDERR: OK
GNOME PPP: STDERR: --> Modem initialized.
GNOME PPP: STDERR: --> Please enter password (or empty password to stop):
GNOME PPP: STDERR: --> Sending: ATM1L3DT*99#
GNOME PPP: STDERR: --> Waiting for carrier.
GNOME PPP: STDERR: ATM1L3DT*99#
GNOME PPP: STDERR: CONNECT 3100000
GNOME PPP: STDERR: --> Carrier detected. Waiting for prompt.
GNOME PPP: STDERR: --> Connected, but carrier signal lost! Retrying...
GNOME PPP: STDERR: --> Sending: ATM1L3DT*99#
GNOME PPP: STDERR: --> Waiting for carrier.
GNOME PPP: STDERR: ~[7f]}#@!}!}!} }-}#}%B#}%}'}"}(}"{B~~[7f]}#@!}!}"}
}-}#}%B#}%}'}"}(}"}5E~~[7f]}#@!}!}#} }-}#}%B#}%}'}"}(}"@@~~[7f]}#@!}!}$}
}-}#}%B#}%}'}"}(}"XB~~[7f]}#@!}!}%} }-}#}%B#}%}'}"}(}"
GNOME PPP: STDERR: G~~[7f]}#@!}!}&} }-}#}%B#}%}'}"}(}"c@~~[7f]}#@!}!}'}
}-}#}%B#}%}'}"}(}"6E~~[7f]}#@!}!}(} }-}#}%B#}%}'}"}(}"BM~~[7f]}#@!}!})}
}-}#}%B#}%}'}"}(}"}7H~~[7f]}#@!}!}*} }-}#}%B#}%}'}"}(}"yO~
GNOME PPP: STDERR: --> Timed out while dialing. Trying again.
GNOME PPP: STDERR: --> Maximum Attempts Exceeded..Aborting!!
GNOME PPP: STDERR: --> Disconnecting at Mon Jul 29 20:14:48 2013
Any pointers to what is going wrong ?
Regards,
---
Vivek
_______________________________________________
ILUGC Mailing List:
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
ILUGC Mailing List Guidelines:
http://ilugc.in/mailinglist-guidelines
