hi, my Zyxel ISDN modem used to work perfectly in Redhat Linux 7.2 but i have now upgraded it to PCQLinux 8.0 (redhat 8.0) since then this problem is coming. hope someone can help me.
the problem is listed again below : ------------------------------------------- and Wvdial says > >--> Starting pppd at Sun May 11 14:53:52 2003 > >--> pid of pppd: 13227 > >--> Disconnecting at Sun May 11 14:54:21 2003 > >--> The PPP daemon has died: A modem hung up the > phone > >(exit code = 16) > >--> man pppd explains pppd error codes in more > detail. > >--> Try again and look into /var/log/messages and > the > >wvdial and pppd man > >pages for more information. > >--> Auto Reconnect will be attempted in 5 seconds > >--> Initializing modem. ------------------------------------------------------ amit --- Deepak Singhal <[EMAIL PROTECTED]> wrote: > I used to connect using zyxel ISDN modem perfectly > fine in redhat 6.2. > > Zyxel had something peculiar with its ISDN setup .. > You can check the AT > commands for Zyxel in its manual > > It uses ATDI<phone Number> when using ISDN line to > dial. I used to issue > these two commands : > > ATZ --- for intializing modem > > ATDI<phonenumber> for dialing > > > Hope this Helps > > > Deepak Singhal > > > >From: amit sharma <[EMAIL PROTECTED]> > >Reply-To: The Linux-Delhi mailing list > <[EMAIL PROTECTED]> > >To: [EMAIL PROTECTED] > >Subject: [ilugd] ISDN with Zyxel modem > >Date: Tue, 29 Jul 2003 02:55:14 -0700 (PDT) > > > >hi, > > > >i found this question put up in mailing list > > > >------------------------------------------------------- > >Hi all, > > > >I am trying to configure Touchtel ISDN on PCQ Linux > >8.0 with ZyXel omni.net > >modem, but here are problems i am facing > > > >1. The setup works perfectly fine in Windows 98. > > > >2. In Linux, I am using wvdialconf to auto-detect > the > >modem with following > >settings > > > >[Dialer Defaults] > >Modem = /dev/ttyS0 > >Baud = 115200 > >Init1 = AT&F > >Init2 = AT&O2B40 > >Modem Name = ZyXEL omni.net PLUS DSS1: V 4.27 > >Modem Type = ISDN Terminal Adapter > >Phone = 1501 > >Username = ***** > >Password = ***** > > > >3. Whenever I try to connect, pppd dies and I get > the > >following messages in > >/var/log/messages > >May 11 14:50:16 localhost pppd[13204]: pppd 2.4.1 > >started by root, uid 0 > >May 11 14:50:16 localhost pppd[13204]: Using > interface > >ppp0 > >May 11 14:50:16 localhost pppd[13204]: Connect: > ppp0 > ><--> /dev/ttyS0 > >May 11 14:50:16 localhost /etc/hotplug/net.agent: > >assuming ppp0 is already > >up > >May 11 14:50:45 localhost pppd[13204]: Hangup > (SIGHUP) > >May 11 14:50:45 localhost pppd[13204]: Modem hangup > >May 11 14:50:45 localhost pppd[13204]: Connection > >terminated. > >May 11 14:50:45 localhost pppd[13204]: Exit. > >May 11 14:50:45 localhost /etc/hotplug/net.agent: > NET > >unregister event not > >supported > > > >and Wvdial says > >--> Starting pppd at Sun May 11 14:53:52 2003 > >--> pid of pppd: 13227 > >--> Disconnecting at Sun May 11 14:54:21 2003 > >--> The PPP daemon has died: A modem hung up the > phone > >(exit code = 16) > >--> man pppd explains pppd error codes in more > detail. > >--> Try again and look into /var/log/messages and > the > >wvdial and pppd man > >pages for more information. > >--> Auto Reconnect will be attempted in 5 seconds > >--> Initializing modem. > > > >4a. Some searching on google suggest that I use > >following Init strings > >instead of above(on geocrawler), > >Init1 = AT&F > >Init2 = AT&O2B40 > >Tried using these inits instead of original, but > error > >above(in point 3) > >persists. No changes in error. > > > >4b. Again searching on google suggested that I use > >following Init strings > >instead of above(on suse list), > >Init1 = AT&FB40 > >Init2 = ATXO > >Tried using these inits instead of original, but > error > >above(in point 3) > >persists. No changes in error. > > > >5. Also tried commenting out "Baud = 115200" . Same > >error as above > > > >6. Then tried inserting "Stupid mode = On" . This > >works on now-india ISDN. > >But with touchtel, no change. > > > >7. Again connected back to Windows 98, and found > out > >actual strings passed > >in log file. Inserted the same in the wvdial.conf > >[Dialer Defaults] > >Modem = /dev/ttyS0 > >; Baud = 115200 > >Init1 = AT&FZE0X8 > >Init2 = ATV1&D2&C1S0=0 > >Init3 = AT&L1S38.3=1 > >Init4 = ATS84.4=1S118.3=0 > >Init5 = ATCN<0> > >Init6 = ATCI<00> > >Init7 = ATS7=60S50=0L3M1&K3&K00&H3 > >Modem Name = ZyXEL omni.net PLUS DSS1: V 4.27 > >Modem Type = ISDN Terminal Adapter > >Phone = 1501 > >Username = **** > >Password = **** > >; Stupid Mode = On > > > >Some success this time. I get connected at 57600 > bps , > >but pppd dies again > >after few seconds. Here is the wvdial output > > > >[root at localhost etc]# wvdial > >--> WvDial: Internet dialer version 1.53 > >--> Initializing modem. > >--> Sending: AT&FZE0X8 > >OK > >--> Sending: ATV1&D2&C1S0=0 > >OK > >--> Sending: AT&L1S38.3=1 > >OK > >--> Sending: ATS84.4=1S118.3=0 > >OK > >--> Sending: ATCN<0> > >OK > >--> Sending: ATCI<00> > >OK > >--> Sending: ATS7=60S50=0L3M1&K3&K00&H3 > >OK > >--> Modem initialized. > >--> Sending: ATDT1501 > >--> Waiting for carrier. > >CARRIER 64000 > >PROTOCOL: PPP > >ERROR CONTROL: NONE > >CONNECT 57600 > >[EMAIL PROTECTED] }&} }"]q~ > >--> Carrier detected. Waiting for prompt. > >[EMAIL PROTECTED] }8}!}$}%j}"}&} } } } > [EMAIL PROTECTED]&hB[0e][ > >b~ > >--> PPP negotiation detected. > >--> Starting pppd at Sun May 11 14:53:52 2003 > >--> pid of pppd: 13227 > >--> Disconnecting at Sun May 11 14:54:21 2003 > >--> The PPP daemon has died: A modem hung up the > phone > >(exit code = 16) > >--> man pppd explains pppd error codes in more > detail. > >--> Try again and look into /var/log/messages and > the > >wvdial and pppd man > >pages for more information. > >--> Auto Reconnect will be attempted in 5 seconds > >--> Initializing modem. > > > >8. Tried inserting "Stupid Mode = On". No change > > > >9. Googling again, I found out omni.net modem > requires > === message truncated === __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com _______________________________________________ ilugd mailing list [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd