You have to create the htb directory in /etc/sysconfig. Also the format of the files is different. Htb should also be enabled in the kernel either as a module or built into the kernel itself. Though in some ways it is similar to cbq it requires to be compiled into the kernel first. It will take a bit more effort than using CBQ but works much better. If you still want to use CBQ let me know and I will send instructions for the same.
Best regards Ashwin Shah -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sandeep Agarwal Sent: Monday, March 29, 2004 5:30 PM To: Abhijit Menon-Sen Cc: [EMAIL PROTECTED] Subject: [ilugd] Re: Suggestion required on CBQ !!!!!! ....."It's derived from cbq.init" Should I leave the files under /etc/sysconfig/cbq as it is And load & configure the HTB? Or remove All CBQ entry first from the system. Sandeep ----- Original Message ----- From: "Abhijit Menon-Sen" <[EMAIL PROTECTED]> To: "Sandeep Agarwal" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Monday, March 29, 2004 5:04 PM Subject: Re: Suggestion required on CBQ !!!!!! > At 2004-03-29 16:58:26 +0530, [EMAIL PROTECTED] wrote: > > > > CBQ is ok for this or any other tool is/are suggested? > > (I'd recommend HTB instead. > See <http://www.lartc.org>) > > -- ams > _______________________________________________ ilugd mailinglist -- [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/[EMAIL PROTECTED]/ _______________________________________________ ilugd mailinglist -- [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/[EMAIL PROTECTED]/