hi buddy 1) TO Get Back ur Shell
well u should boot ur PC in single usermode that u can do i guess .Then u go in etc/inittab there u go to the line default start level make it to 3. 2) Now reboot the system well u have the PC with the shell & now if u wish change the /etc/X11/XF86Config there u can change the setting but play safe there . This is the way i resolved the problem i have once ;-)) hope it works for u too ;-)) Thanks & Regards Nawneet Kumar -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] n Behalf Of Sudev Barar Sent: Monday, August 23, 2004 8:43 AM To: [EMAIL PROTECTED]; The Linux-Delhi mailing list Subject: Re: [ilugd] LTSP problem On Sat, 2004-08-21 at 23:21, Mayank Jain wrote: > shell at the workstation. But the moment X starts, the screen goes > blank, the monitor lights start blinking & i don't get anything back, > neither the shell nor any X. All i can do is reboot! Your monitor is not able to support the refresh rates being set. Try to reduce the color depth or screen size to minimum and then work your way up. Also confirm that our display card is havng atleast 1mb RAM for 800x600 or 2mb for 1024x768 resolutions. HTH -- Sudev Barar Learning Linux _______________________________________________ ilugd mailinglist -- [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/[EMAIL PROTECTED]/ _______________________________________________ ilugd mailinglist -- [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/[EMAIL PROTECTED]/
