It is disgusting that I can't handle a simple mounting issue!! I am trying to mount an external usb disk on a debian etch server but somehow it just won't recognise the disk.
On plugging out and plugging in the drive, "dmesg | tail" only shows usb 1-3: USB disconnect, address 10 usb 1-3: new high speed USB device using address 11 tail -f /var/log/messages does not say anything more. "fdisk -l" does not show the disk. ************ Disk /dev/cciss/c0d0: 293.6 GB, 293617820160 bytes 255 heads, 63 sectors/track, 35697 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 * 1 35366 284077363+ 83 Linux /dev/cciss/c0d0p2 35367 35697 2658757+ 5 Extended /dev/cciss/c0d0p5 35367 35697 2658726 82 Linux swap / Solaris ************* modprobe -l | grep sr_mod shows that sr_mod is there. There is nothing wrong with the external disk. It is a new disk and mounts fine on another machine (running ubuntu 7.10). The server used to run debian sarge until sometime back and I remember having used usb drives without any issue. I have not used an external usb drive since the server was upgraded. Would be grateful for any leads. Vikas _______________________________________________ ilugd mailinglist -- ilugd@lists.linux-delhi.org http://frodo.hserus.net/mailman/listinfo/ilugd Next Event: http://freed.in - February 22-24, 2008 Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/ilugd@lists.linux-delhi.org/