hey, How can I " Set up a static route on your box that says for the Natted subnet on eth0 use ppp0 for gateway." ??
and i tested these nat settings(http://www.aboutdebian.com/proxy.htm) on my another machine,but then there was a little change : 1. At that time I used eth1(incoming net connection) instead of ppp0(incoming net connection) 2. eth0 was connected to a small hub(8 port) not to the wifi router directly.. and at that time i got response from both(after running nat) that are: ping google.com -I eth0 & ping google.com -I eth1 So my confusions are(in this case) : 1. ppp0 doesn't behave as eth1 2. wifi-router doesn't work as hub OR is there any way so that i can use my internet connection on two machine?if anyone knows tell me step-by-step, ;) Thanks, Devesh _______________________________________________ ilugd mailinglist -- ilugd@lists.linux-delhi.org http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
