Dear Vijay/list, Thanks for the swift help, However, I am sorry to add that in mandriva there is no wvdial hence wvdial.conf does not exist.
Despite that i loaded wvdial rpm and tried to configure but same could not be activated. Thanks again for the reference. I would however appreciate if help could be initiated with reference to this. Kamal Dave --- On Thu, 12/18/08, Vijay Kakkar <vijaykakk...@gmail.com> wrote: > From: Vijay Kakkar <vijaykakk...@gmail.com> > Subject: Re: [ilugd] assistance in setting up reliance mg-880 > To: kamal_dave_advoc...@yahoo.com, "The Linux-Delhi mailing list" > <ilugd@lists.linux-delhi.org> > Date: Thursday, December 18, 2008, 12:40 PM > Hi Kamal > > On Thu, Dec 18, 2008 at 12:29 PM, kamal dave > <kamal_dave_advoc...@yahoo.com>wrote: > > > Hi list, > > > > I have Mandriva 2008 spring edition > > I seek assistance in configuring reliance usb modem > > the modem gets recognised as output in > > /proc/bus/usb/devices > > Output: > > ….. > > ….. > > > > T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 > Spd=12 MxCh= 0 > > D: Ver= 1.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 > #Cfgs= 1 > > P: Vendor=19d2 ProdID=fffd Rev= 0.00 > > S: Manufacturer=ZTE, Incorporated > > S: Product=ZTE CDMA Tech > > S: SerialNumber=Serial Number > > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA > > I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff > Driver=(none) > > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms > > E: Ad=8a(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=0b(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff > Driver=(none) > > E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff > Driver=(none) > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > > ….. > > > > I have tried to configure reliance mg- 880 in KPPP > > the device gets recognised as > > > > /dev/modem > > > > there i mentioned the phone number/ password > > & dial string in dialer box > > > > #777 > > > > but when i say connect it gives output > > > > modem is busy > > > > > > but still unable to do configure > > > > > > Thanks > > > > Kamal Dave > > > I am also using the same Reliance Data card,and its > working fine for me,i > searched once on the internet and found one very useful > URL > > please visit the below URL ,i hope it will solve your > problem > > http://www.rimweb.in/forums/index.php?showtopic=5821 > > > > > > > > > > > > > _______________________________________________ > > ilugd mailinglist -- ilugd@lists.linux-delhi.org > > http://frodo.hserus.net/mailman/listinfo/ilugd > > Archives at: > http://news.gmane.org/gmane.user-groups.linux.delhi > > > http://www.mail-archive.com/ilugd@lists.linux-delhi.org/ > > > > > > -- > Warm Regards, > Vijay Kakkar, MCSA,RHCE,RHCI,RHCX > Technical Consultant Global Learning Services > Red Hat India Pvt. Ltd. > Web:<http://www.in.redhat.com/training> _______________________________________________ ilugd mailinglist -- ilugd@lists.linux-delhi.org http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/ilugd@lists.linux-delhi.org/