>Is it possible to take the logic board from a Graphite 600mhz iMac to use in >a 400mhz iMac DV? > >Or is there down converter, power supply and power analog video board >incompatibilities?
I believe you can do such a swap without issue. I believe all the slot load CRT iMacs used compatible power supply guts. So if you have a 600 MHz slot load CRT iMac with a dead power supply, CRT or otherwise, and a working 400 MHz version, you should be able to just swap the logic boards and thus bring the faster machine back to life. The same applies to the tray load CRT iMacs, I believe you can safely swap logic boards between tray load models. What you can NOT do is swap boards between iMac lines, so slot load models can't go into tray loads and vice versa (and the Flat Panels models are right out). -chris <http://www.mythtech.net> -- The iMac List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:imac-list@mail.maclaunch.com> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/> --------------------------------------------------------------- iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com ---------------------------------------------------------------
