Procedure is missing a couple of important steps and is revised below! Daniel Donnelly Ipswitch Technical Support ________________________________________________________ See our Knowledge Base at http://support.ipswitch.com/kb In reply to 22 Dec message from [EMAIL PROTECTED]: Some customers have reported problems with POP e-mail after upgrading to IMail Server 6. We are working on a fix right now, but wanted to make a workaround available to affected users right away. If you are having a problem with users receiving e-mail with POP3 after upgrading to version 6, you can either reinstall your previous version of IMail Server, or you can follow this procedure to revert only the POP server: - in your IMail directory, rename pop3d32.exe to pop3d32.601 (you'll need this file to return to version 6 when a permanent fix is available) - stop the POP3 service by typing (at a DOS prompt): net stop pop3d32 - download the 5.08 pop server from ftp://ftp.ipswitch.com/ipswitch/product_support/imail/pop3d32.exe into your IMail directory -- At a DOS \imail prompt type (no --!): -- pop3d32 -remove -- pop3d32 -install - restart the POP3 service by typing: net start pop3d32 ** not needed, last step above should report 'Service installed and running'. This procedure will leave all new functions of 6.0 except those involving the POP server, such as APOP authentication. When a future V6.0x patch is released, before attempting to run the patch, rename pop3d32.exe to pop3d32.508. Rename pop3d32.601 to pop3d32.exe. This will allow the patch to find the 'correct' pop3d32.exe file and the patch will complete rather than fail with an error about the 'wrong' file found. ========== David Karp Product Marketing Manager Ipswitch, Inc. [EMAIL PROTECTED] ========== Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list.
