Hi Evan,

sorry for late reply, just to confirm I'm pasting below the required output:

Evan Layton wrote:
> Hi Martin,
> 
> I appears from the df output that you're probably running into bug 2302 
> which is a ZFS bug tracked in 
> http://bugs.opensolaris.org/view_bug.do?bug_id=6738349. This has been 
> fixed in ZFS but will not be available until snv_98.
> 
> To be sure this si the problem it would be helpful to see the "zfs list" 
> and "beadm list" output.

# zfs list
NAME                                       USED  AVAIL  REFER  MOUNTPOINT
rpool                                     4.67G  4.37G    60K  /rpool
[EMAIL PROTECTED]                             19.5K      -    55K  -
rpool/ROOT                                4.64G  4.37G    18K  /rpool/ROOT
rpool/[EMAIL PROTECTED]                          15K      -    18K  -
rpool/ROOT/opensolaris                    4.54G  4.37G  3.14G  legacy
rpool/ROOT/[EMAIL PROTECTED]            1.38G      -  2.22G  -
rpool/ROOT/[EMAIL PROTECTED]      16.0M      -  3.14G  -
rpool/ROOT/opensolaris-1                   106M  4.37G  3.02G  legacy
rpool/ROOT/opensolaris-1/opt                  0  4.37G  3.60M  /opt
rpool/ROOT/opensolaris/opt                3.66M  4.37G  3.60M  /opt
rpool/ROOT/opensolaris/[EMAIL PROTECTED]          57K      -  3.60M  -
rpool/ROOT/opensolaris/[EMAIL PROTECTED]      0      -  3.60M  -
rpool/export                              24.0M  4.37G    19K  /export
rpool/[EMAIL PROTECTED]                        15K      -    19K  -
rpool/export/home                         24.0M  4.37G  24.0M  /export/home
rpool/export/[EMAIL PROTECTED]                   18K      -    21K  -


# beadm list

BE            Active Active on Mountpoint Space
Name                 reboot               Used
----          ------ --------- ---------- -----
opensolaris   yes    yes       /          4.54G
opensolaris-1 no     no        -          105.54M


> 
> Thanks,
> -evan

Thanx,
Martin

> 
> Martin Man wrote:
>> Hi Mark,
>>
>> Mark R. Bowyer wrote:
>>> I had this problem when I ran out of ZFS partition space, so it 
>>> wasn't able to copy the data in the promotion.  This was on a 
>>> multi-boot laptop with only 10GB set aside for OpenSolaris.  After a 
>>> few updates, it used up nearly all the disk and I'm now stuck booting 
>>> to the BE before the update, unable to activate and clean up the 
>>> latest one.
>>
>> # df -h
>> Filesystem            Size  Used Avail Use% Mounted on
>> rpool/ROOT/opensolaris
>>                        7.6G  3.2G  4.4G  42% /
>> swap                  448M  740K  447M   1% /etc/svc/volatile
>> /usr/lib/libc/libc_hwcap1.so.1
>>                        7.6G  3.2G  4.4G  42% /lib/libc.so.1
>> swap                  447M  8.0K  447M   1% /tmp
>> swap                  447M   44K  447M   1% /var/run
>> rpool/ROOT/opensolaris/opt
>>                        4.4G  3.7M  4.4G   1% /opt
>> rpool/export          4.4G   19K  4.4G   1% /export
>> rpool/export/home     4.4G   21M  4.4G   1% /export/home
>> rpool                 4.4G   60K  4.4G   1% /rpool
>> rpool/ROOT            4.4G   18K  4.4G   1% /rpool/ROOT
>>
>>
>>> I'm waiting for the next CD image, and will then repartition and 
>>> reinstall from scratch, I think.
>>>
>>> But check how much space you have left, and whether there's any 
>>> snapshots you can clear out to make room?  I'd be surprised if you 
>>> went straight from install to update, though.  How much space did you 
>>> partition for it?
>>
>> Yes, it was straight install + upgrade to see how smooth the process 
>> is. In fact it's a scratchpad 10G inside Parallels so I don't mind 
>> starting from scratch with a bigger hard drive.
>>
>>> Ta,
>>> Mark.
>>
>> thanx,
>> Martin
>>
>>> Martin Man wrote:
>>>> Hi all,
>>>>
>>>> I have installed fresh opensolaris 2008.05 and tried to image-update 
>>>> it to latest snv_95 according to the instructions given here:
>>>>
>>>> http://opensolaris.org/os/project/indiana/resources/rn3/image-update/
>>>>
>>>> I have successfully performed all steps, however last command filed 
>>>> like this (after enabling BE_PRINT_ERR=true):
>>>>
>>>> # beadm activate opensolaris-1
>>>> set_canmount: failed to promote dataset (rpool/ROOT/opensolaris-1)
>>>> be_activate: failed to set canmount dataset property
>>>> beadm: Unable to activate opensolaris-1
>>>>
>>>>
>>>> I have tried to googe for help but haven't found any solution,
>>>>
>>>> thanx for your help,
>>>> Martin
>>>> _______________________________________________
>>>> indiana-discuss mailing list
>>>> [email protected]
>>>> http://mail.opensolaris.org/mailman/listinfo/indiana-discuss
>>> _______________________________________________
>>> indiana-discuss mailing list
>>> [email protected]
>>> http://mail.opensolaris.org/mailman/listinfo/indiana-discuss
>>
>> _______________________________________________
>> indiana-discuss mailing list
>> [email protected]
>> http://mail.opensolaris.org/mailman/listinfo/indiana-discuss
> 

_______________________________________________
indiana-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/indiana-discuss

Reply via email to