Hi temen2 linuxer...
Saya mo nanya nih ada yang pernah nyoba tvtuner dilinux dan berhasil nggak??
soalnya saya coba di computer saya hasilnya tidak bagus, gambar jelek
dan suara tidak keluar...
gambar yang keluar di komp saya hitam putih selain itu channel yang ke
baca cuma satu... banyak semutnya juga..
saya pake SUSE 9.1, dan kwintv untuk tv appnya . Sekalian mo nanya
juga tv app apa yang paling OK di linux.
saya juga sertakan hasil dari lspci, lsmod dan dmesg , mungkin temen2
ada yang bisa bantu saya. trims....
--
--------------------
Best Regards,
Imamuddin Akbar
----------
Linux version 2.6.4-52-default ([EMAIL PROTECTED]) (gcc version 3.3.3 (SuSE
Linux)) #1 Wed Apr 7 02:08:30 UTC 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ffc000 (usable)
BIOS-e820: 0000000017ffc000 - 0000000017fff000 (ACPI data)
BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
629MB vmalloc/ioremap area available.
0MB HIGHMEM available.
383MB LOWMEM available.
On node 0 totalpages: 98300
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 94204 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f6730
ACPI: RSDT (v001 ASUS P4SE 0x42302e31 MSFT 0x31313031) @ 0x17ffc000
ACPI: FADT (v001 ASUS P4SE 0x42302e31 MSFT 0x31313031) @ 0x17ffc100
ACPI: BOOT (v001 ASUS P4SE 0x42302e31 MSFT 0x31313031) @ 0x17ffc040
ACPI: MADT (v001 ASUS P4SE 0x42302e31 MSFT 0x31313031) @ 0x17ffc080
ACPI: DSDT (v001 ASUS P4SE 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
ACPI: local apic disabled
Built 1 zonelists
Kernel command line: root=/dev/hda7 vga=0x317 desktop resume=/dev/hda9
splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
CKRM Initialized
Detected 1715.569 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 385104k/393200k available (1969k kernel code, 7316k reserved, 677k
data, 212k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3399.68 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
Failure registering capabilities with the kernel
selinux_register_security: Registering secondary module capability
Capability LSM initialized
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Looking for DSDT in initrd ...No customized DSDT found in initrd!
Freeing initrd memory: 990k freed
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
do_initcalls
init_elf_binfmt
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1520, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
No customized DSDT found!
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
... the first call_usermodehelper: pci_bus
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
vesafb: framebuffer at 0xf0000000, mapped to 0xd8809000, size 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:c650
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Simple Boot Flag at 0x3a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Initial HugeTLB pages allocated: 0
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
SELinux: Registering netfilter hooks
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 37245
bytes, found (1024x768, 17142 bytes, v3).
Console: switching to colour frame buffer device 118x41
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 961B MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6E040L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: DVD-ROM DDU1622, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG CD-ROM SC-152L, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
Resume Machine: resuming from /dev/hda9
Resuming from device hda9
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
VFS: Mounted root (ext2 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 212k freed
Adding 714852k swap on /dev/hda9. Priority:42 extents:1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED]
NTFS driver 2.1.6 [Flags: R/O MODULE].
NTFS-fs error (device hda1): parse_options(): Unrecognized mount option acl.
NTFS-fs error (device hda1): parse_options(): Unrecognized mount option
user_xattr.
NTFS-fs error (device hda5): parse_options(): Unrecognized mount option acl.
NTFS-fs error (device hda5): parse_options(): Unrecognized mount option
user_xattr.
NTFS-fs error (device hda6): parse_options(): Unrecognized mount option acl.
NTFS-fs error (device hda6): parse_options(): Unrecognized mount option
user_xattr.
subfs 0.9
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:02.2: OHCI Host Controller
ohci_hcd 0000:00:02.2: irq 5, pci mem d98c1000
ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.4-52-default ohci_hcd
usb usb1: SerialNumber: 0000:00:02.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:02.3: OHCI Host Controller
ohci_hcd 0000:00:02.3: irq 9, pci mem d98c3000
ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.4-52-default ohci_hcd
usb usb2: SerialNumber: 0000:00:02.3
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xd98ce000, 00:55:d0:ca:7a:8f, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 646 chipset
agpgart: Maximum main memory to use for agp memory: 321M
agpgart: AGP aperture is 64M @ 0xe8000000
eth0: link down
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03545c0(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device d230c800(sit0)
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
powernow: This module only works with AMD K7 CPUs
intel8x0_measure_ac97_clock: measured 49534 usecs
intel8x0: clocking to 48000
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
drivers/usb/core/usb.c: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Non-volatile memory driver v1.2
eth0: no IPv6 routers present
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM drive, 128kB Cache
SCSI subsystem initialized
st: Version 20040318, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
mtrr: 0xf0000000,0x4000000 overlaps existing 0xf0000000,0x1000000
Linux video capture interface: v1.00
bttv: driver version 0.9.13 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 11, latency: 32, mmio: 0xef000000
bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: bt878 #0 [sw] passed test.
bttv: readee error
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
end_request: I/O error, dev fd0, sector 0
usb 1-2: new full speed USB device using address 2
usb 1-2: Product: JUMPDRIVE
usb 1-2: Manufacturer: LEXAR MEDIA
usb 1-2: SerialNumber: L203352006110
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: LEXAR Model: JUMPDRIVE Rev: 1.11
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 251904 512-byte hdwr sectors (129 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
USB Mass Storage device found at 2
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
usb 1-2: USB disconnect, address 2
sda : READ CAPACITY failed.
sda : status=0, message=00, host=7, driver=00
sda : sense not available.
sda: assuming Write Enabled
sda: assuming drive cache: write through
scsi0 (0:0): rejecting I/O to dead device
scsi0 (0:0): rejecting I/O to dead device
scsi0 (0:0): rejecting I/O to dead device
scsi0 (0:0): rejecting I/O to dead device
sda : READ CAPACITY failed.
sda : status=0, message=00, host=0, driver=04
sda : sense not available.
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda:<3>scsi0 (0:0): rejecting I/O to dead device
Buffer I/O error on device sda, logical block 0
scsi0 (0:0): rejecting I/O to dead device
Buffer I/O error on device sda, logical block 0
scsi0 (0:0): rejecting I/O to dead device
Buffer I/O error on device sda, logical block 31487
scsi0 (0:0): rejecting I/O to dead device
Buffer I/O error on device sda, logical block 31487
scsi0 (0:0): rejecting I/O to dead device
Buffer I/O error on device sda, logical block 0
ldm_validate_partition_table(): Disk read failed.
scsi0 (0:0): rejecting I/O to dead device
scsi0 (0:0): rejecting I/O to dead device
Buffer I/O error on device sda, logical block 0
unable to read partition table
unable to read partition table
usb 1-2: new full speed USB device using address 3
usb 1-2: Product: JUMPDRIVE
usb 1-2: Manufacturer: LEXAR MEDIA
usb 1-2: SerialNumber: L203352006110
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: LEXAR Model: JUMPDRIVE Rev: 1.11
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 251904 512-byte hdwr sectors (129 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 3
----------
Module Size Used by
vfat 14080 1
fat 43328 1 vfat
sg 35360 0
usb_storage 59584 2
bttv 143372 0
video_buf 19972 1 bttv
i2c_algo_bit 9352 1 bttv
v4l2_common 6400 1 bttv
btcx_risc 4872 1 bttv
i2c_core 23684 2 bttv,i2c_algo_bit
videodev 9472 1 bttv
edd 9240 0
joydev 10176 0
st 38940 0
sd_mod 19840 3
sr_mod 15652 0
scsi_mod 107980 5 sg,usb_storage,st,sd_mod,sr_mod
ide_cd 36484 0
cdrom 36508 2 sr_mod,ide_cd
nvram 8328 0
usbserial 28912 0
parport_pc 35264 1
lp 10916 0
parport 37704 2 parport_pc,lp
snd_seq_oss 30976 0
snd_seq_midi_event 7680 1 snd_seq_oss
snd_seq 54672 5 snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 56868 0
snd_mixer_oss 18688 1 snd_pcm_oss
speedstep_lib 3712 0
freq_table 4612 0
thermal 12424 0
processor 16040 1 thermal
fan 3972 0
button 6032 0
battery 8580 0
ac 4868 0
snd_intel8x0 32424 4
snd_ac97_codec 60676 1 snd_intel8x0
snd_pcm 96776 2 snd_pcm_oss,snd_intel8x0
snd_timer 25476 2 snd_seq,snd_pcm
snd_page_alloc 11012 2 snd_intel8x0,snd_pcm
gameport 4736 1 snd_intel8x0
snd_mpu401_uart 7808 1 snd_intel8x0
ipv6 244100 13
snd_rawmidi 24992 1 snd_mpu401_uart
snd_seq_device 8328 3 snd_seq_oss,snd_seq,snd_rawmidi
snd 59524 21
snd_seq_oss,snd_seq_midi_event,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 8800 2 bttv,snd
af_packet 20360 2
sis_agp 5760 1
agpgart 28712 1 sis_agp
8139too 23040 0
mii 5248 1 8139too
ohci_hcd 19076 0
usbcore 96988 5 usb_storage,usbserial,ohci_hcd
evdev 9600 0
subfs 7296 3
ntfs 86092 0
dm_mod 50044 0
----------
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host &
Memory & AGP Controller
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual
PCI-to-PCI bridge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS961 [MuTIOL Media
IO] (rev 10)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
0000:00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 07)
0000:00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 07)
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS]
Sound Controller (rev a0)
0000:00:0b.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
0000:00:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
0000:00:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX
400] (rev b2)
[Non-text portions of this message have been removed]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Indo-Linux/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
