With 0.13.0 on RHEL 7, the logs were still being redirected to the
`/var/log/influxdb` directory. Are there any relevant messages in the
`/var/log/influxdb/influxd.log` file?

Thanks,
Ross

On Fri, Jul 29, 2016 at 12:25 PM, <[email protected]> wrote:

> I am running influxdb on a RHLE 7 machine.
> I installed a fresh 0.13.0 version of influxdb.
> After I created databases, users and retention policies, I was able to
> write to the database from a remote client using the HTTP API successfully.
>
> However, when I enabled HTTPS in the config file, I tried restarting the
> service but it failed, giving me errors similar to the following:
>
>
>
> ● influxdb.service - InfluxDB is an open-source, distributed, time series
> database
>    Loaded: loaded (/usr/lib/systemd/system/influxdb.service; disabled;
> vendor preset: disabled)
>    Active: failed (Result: start-limit) since Fri 2016-07-29 20:57:19 GST;
> 1s ago
>      Docs: https://docs.influxdata.com/influxdb/
>   Process: 53595 ExecStart=/bin/sh -c /usr/bin/influxd -config
> /etc/influxdb/influxdb.conf ${INFLUXD_OPTS} >>${STDOUT} 2>>${STDERR}
> (code=exited, status=1/FAILURE)
>  Main PID: 53595 (code=exited, status=1/FAILURE)
>
> Jul 29 20:57:19 hrc-cse-perf01 systemd[1]: Unit influxdb.service entered
> failed state.
> Jul 29 20:57:19 hrc-cse-perf01 systemd[1]: influxdb.service failed.
> Jul 29 20:57:19 hrc-cse-perf01 systemd[1]: influxdb.service holdoff time
> over, scheduling restart.
> Jul 29 20:57:19 hrc-cse-perf01 systemd[1]: start request repeated too
> quickly for influxdb.service
> Jul 29 20:57:19 hrc-cse-perf01 systemd[1]: Failed to start InfluxDB is an
> open-source, distributed, time series database.
> Jul 29 20:57:19 hrc-cse-perf01 systemd[1]: Unit influxdb.service entered
> failed state.
> Jul 29 20:57:19 hrc-cse-perf01 systemd[1]: influxdb.service failed.
>
>
> I managed to get it to start again by using the command influx (and write
> to database using HTTPS this is why I doubt this is from HTTPS ) , but it
> still causes the service to fail sometimes (when I change something in the
> config file and try to restart service again.)
>
> Now, I can't get the service to work again.
>
> This problem has been bugging me for quite sometime now.
> Tried some usual obvious commands related to systems, but with no use:
>
> systemctl restart influxdb.service
>
> systemctl stop influxdb.service
> systemctl reset-faild influxdb.service
> then
> systemctl start influxdb.service
>
> and
> systemctl disable influxdb.service
>
> NOTHING CHANGES.
>
>
> This is the result of journalctl -xe in case it's of any use (although
> looks similar to the first error):
>
> -- Subject: Unit influxdb.service has begun start-up
> -- Defined-By: systemd
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> --
> -- Unit influxdb.service has begun starting up.
> Jul 29 21:16:56 hrc-cse-perf01 systemd[1]: influxdb.service: main process
> exited, code=exited, status=1/FAILURE
> Jul 29 21:16:56 hrc-cse-perf01 systemd[1]: Unit influxdb.service entered
> failed state.
> Jul 29 21:16:56 hrc-cse-perf01 systemd[1]: influxdb.service failed.
> Jul 29 21:16:57 hrc-cse-perf01 systemd[1]: influxdb.service holdoff time
> over, scheduling restart.
> Jul 29 21:16:57 hrc-cse-perf01 systemd[1]: Cannot add dependency job for
> unit firewalld.service, ignoring: Unit firewalld.service is ma
> Jul 29 21:16:57 hrc-cse-perf01 systemd[1]: start request repeated too
> quickly for influxdb.service
> Jul 29 21:16:57 hrc-cse-perf01 systemd[1]: Failed to start InfluxDB is an
> open-source, distributed, time series database.
> -- Subject: Unit influxdb.service has failed
> -- Defined-By: systemd
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> --
> -- Unit influxdb.service has failed.
> --
> -- The result is failed.
>
> --
> Remember to include the InfluxDB version number with all issue reports
> ---
> You received this message because you are subscribed to the Google Groups
> "InfluxDB" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/influxdb.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/influxdb/712fa317-99aa-4281-b0b8-82cd6c18645a%40googlegroups.com
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
Remember to include the InfluxDB version number with all issue reports
--- 
You received this message because you are subscribed to the Google Groups 
"InfluxDB" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/influxdb.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/influxdb/CAD8sRLDFh_%2BFkP%2B4FCEzapJdz%3Dix1c8jNVukdXstG_NfC_TM5w%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to