Thank you, Frank. Your assumptions are correct. However, if I do wget tar then I get: # service influxdb start influxdb: unrecognized service
and here I am stuck. Thank you very much for your help, Lucia ----------------------------------------------------------------------------- Dr. Lucia Morganti @ INFN - CNAF (www.cnaf.infn.it) Address: Viale Berti Pichat 6/2, 40127 Bologna (IT) ----------------------------------------------------------------------------- On 24 November 2017 at 20:05, Frank Inselbuch <inselb...@unixedge.com> wrote: > > Okay so first you have to get the installation kit which comes in the form of > a compressed archive, from here: > > https://portal.influxdata.com/downloads#influxdb > > I am not familiar with the board you are talking about but assuming it's an > arm processor and running a Debian-style Linux, you can try this one: > > This command will pull the kit to your machine: > wget > https://dl.influxdata.com/influxdb/releases/influxdb-1.4.2_linux_armhf.tar.gz > > Then you decomparess the archive like this: > tar xvfz influxdb-1.4.2_linux_armhf.tar.gz > > Then you should be able to start the database: > > service influxdb start > > or > > systemctl start influxdb > > > > > > Frank Inselbuch > Unix Edge, Inc. > Fleet Surveillance and Analytics > 713-701-5421 > inselb...@unixedge.com > https://zoom.us/j/7137015421 > > -----Original Message----- > From: influxdb@googlegroups.com [mailto:influxdb@googlegroups.com] On Behalf > Of lucia.morga...@gmail.com > Sent: Friday, November 24, 2017 9:15 AM > To: InfluxData <influxdb@googlegroups.com> > Subject: [influxdb] Re: InfluxDB Raspberry Pi installation? > > Hi Frank, > what do you mean when you say "after you tar you install it with dpkg"? > I'm working on ARM, Invidia X1 board. > Thanks, > lucia > > On Thursday, October 13, 2016 at 11:56:15 PM UTC+2, Frank Inselbuch wrote: >> After you tar you will install it with dpkg. >> It will probably get started automatically at that point. >> But if you want to start it/restart/stop just >> >> >> sudo service influxd start (or restart or stop) >> >> >> by default I believe the server will be available for http: requests >> on port 8086 >> >> >> i would encourage you to also install something like grafana to pull >> data from influxdb, but you can roll your own with http requests >> >> >> to work with the database interactively, use the CLI (command line >> interface) >> >> >> just type >> >> >> $ influx >> >> >> here's a few commands to get you started >> >> >> >> >> Influx> create database test1 >> Influx> insert cars,vin=3948579834 year=2015,color='Green',mileage=15 >> Influx> select * from cars >> >> >> Good luck. >> >> >> >> >> >> >> >> >> >> >> >> >> >> On Thursday, October 13, 2016 at 7:39:27 AM UTC-5, EBRAddict wrote: >> Hi, >> >> >> I'd like to try InfluxDB on a Raspberry Pi 3 for a mobile sensor project. >> Currently it's logging ~50 data points every 200ms to a USB flash drive text >> file but I want to ramp that up to 200 every 10ms, or however fast I can >> push data from the microcontrollers to the Pi. >> >> >> I downloaded and uncompressed the ARM binaries using the instructions on the >> InfluxDB download page: >> >> >> wget >> https://dl.influxdata.com/influxdb/releases/influxdb-1.0.2_linux_armhf >> .tar.gz tar xvfz influxdb-1.0.2_linux_armhf.tar.gz >> >> >> What are the next steps? I'm not a Linux guy but I can follow directions if >> someone could point me to them. I'd like to configure the service(s) to run >> at startup automatically and be accessible for querying by any logged in >> user (it's a closed system). >> >> >> Thanks. > > -- > Remember to include the version number! > --- > You received this message because you are subscribed to a topic in the Google > Groups "InfluxData" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/influxdb/us4x3V2fbNk/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > influxdb+unsubscr...@googlegroups.com. > To post to this group, send email to influxdb@googlegroups.com. > Visit this group at https://groups.google.com/group/influxdb. > To view this discussion on the web visit > https://groups.google.com/d/msgid/influxdb/d55e0819-a907-4733-9a2f-5d572686e435%40googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > > -- > Remember to include the version number! > --- > You received this message because you are subscribed to a topic in the Google > Groups "InfluxData" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/influxdb/us4x3V2fbNk/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > influxdb+unsubscr...@googlegroups.com. > To post to this group, send email to influxdb@googlegroups.com. > Visit this group at https://groups.google.com/group/influxdb. > To view this discussion on the web visit > https://groups.google.com/d/msgid/influxdb/SN1PR16MB06850CC2C148E380990CC702DD260%40SN1PR16MB0685.namprd16.prod.outlook.com. > For more options, visit https://groups.google.com/d/optout. -- Remember to include the version number! --- You received this message because you are subscribed to the Google Groups "InfluxData" group. To unsubscribe from this group and stop receiving emails from it, send an email to influxdb+unsubscr...@googlegroups.com. To post to this group, send email to influxdb@googlegroups.com. Visit this group at https://groups.google.com/group/influxdb. To view this discussion on the web visit https://groups.google.com/d/msgid/influxdb/CAAuS_VT3qF8EqP2cMu5jAC0wC%3DxZ_4q9dr2Z5koB7gjpptEB%2Bg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.