I made the following modification to cyradm and it doesnt give the errors any more. I don't know why the cyrus install is not smart enough to change these paths itself.
x) exec perl -I/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/ -MCyrus::IMAP::Shell -e shell -- ${1+"$@"} ;; *) exec perl -I/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/ -MCyrus::IMAP::Shell -e shell -- "$@" ;; Problem is running ldd -r /spare/local/lib/per5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so gives me a lot of missing symbols even though cyradm runs. I havent fully tested it so I don't really know what exactly might be broken here but I am going to test it out this morning. Here is the output of ldd -r on IMAP.so: [EMAIL PROTECTED] cyrus-imapd-2.2.8]# ldd -r /spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so libdb-4.2.so => /spare/local/lib/libdb-4.2.so (0x2aaca000) libsasl2.so.2 => /spare/local/lib/libsasl2.so.2 (0x2ab71000) libssl.so.4 => /lib/libssl.so.4 (0x2ab84000) libcrypto.so.4 => /lib/libcrypto.so.4 (0x2abb9000) libc.so.6 => /lib/tls/libc.so.6 (0x42000000) libpthread.so.0 => /lib/tls/libpthread.so.0 (0x2acb0000) libdl.so.2 => /lib/libdl.so.2 (0x2acbf000) libresolv.so.2 => /lib/libresolv.so.2 (0x2acc3000) libgssapi_krb5.so.2 => /usr/kerberos/lib/libgssapi_krb5.so.2 (0x2aced000) libkrb5.so.3 => /usr/kerberos/lib/libkrb5.so.3 (0x2ad00000) libcom_err.so.3 => /usr/kerberos/lib/libcom_err.so.3 (0x2ad5e000) libk5crypto.so.3 => /usr/kerberos/lib/libk5crypto.so.3 (0x2ad60000) libz.so.1 => /usr/lib/libz.so.1 (0x2ad71000) /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x55555000) undefined symbol: Perl_croak (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_sv_free (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_markstack_grow (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_croak_nocontext (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_save_int (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_sv_setiv (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_sv_2pv_flags (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_av_len (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_pop_scope (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Idebug_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_av_shift (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_mg_set (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_sv_newmortal (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_sv_2bool (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_stack_grow (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_newSVsv (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_form (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_push_scope (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Isv_yes_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Tmarkstack_max_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_safesysfree (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_newSVpv (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_sv_setpv (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_sv_2mortal (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_newXS (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Top_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Tmarkstack_ptr_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Isv_no_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Isv_undef_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_free_tmps (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_sv_setsv_flags (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Tstack_base_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_sv_mortalcopy (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_newRV (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_get_sv (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Gthr_key_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_newAV (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Tstack_max_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_av_push (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_call_sv (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_newSViv (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Ttmps_ix_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_deb (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_sv_setref_pv (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_hv_fetch (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_sv_2iv (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_sv_derived_from (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Tscopestack_ix_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_pad_sv (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Tstack_sp_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_block_gimme (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_Ttmps_floor_ptr (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_safesysmalloc (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) undefined symbol: Perl_sv_2pv_nolen (/spare/local/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so) On Sun, 24 Oct 2004, Dominic Ijichi wrote: > Quoting Akshay Kumar <[EMAIL PROTECTED]>: > > > Guys, > > > > One more problem, cyradm wont work. > > > > [EMAIL PROTECTED] bin]# ./cyradm > > Can't load > > > >'/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so' > > for module Cyrus::IMAP: > > /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so: > > undefined symbol: db_version at > > /usr/lib/perl5/5.8.0/i386-linux-thread-multi/DynaLoader.pm line 229. > > so.. ldd -r > /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus/IMAP/IMAP.so > you'll either get missing symbols and/or missing lib. which is it? > otherwise, it looks like the perl mods are correctly installed. > > if you built these while you had broken db libs, it might be that subsequent > installs sees them and doesnt want to overwrite them, possibly? in which case > delete them by hand and try doing 'make install' again. > > > at /usr/lib/perl5/5.8.0/i386-linux-thread-multi/Cyrus/IMAP/Admin.pm line > > 44 > > Compilation failed in require at > > /usr/lib/perl5/5.8.0/i386-linux-thread-multi/Cyrus/IMAP/Admin.pm line 44. > > BEGIN failed--compilation aborted at > > /usr/lib/perl5/5.8.0/i386-linux-thread-multi/Cyrus/IMAP/Admin.pm line 44. > > Compilation failed in require at > > /usr/lib/perl5/5.8.0/i386-linux-thread-multi/Cyrus/IMAP/Shell.pm line 60. > > BEGIN failed--compilation aborted at > > /usr/lib/perl5/5.8.0/i386-linux-thread-multi/Cyrus/IMAP/Shell.pm line 60. > > Compilation failed in require. > > BEGIN failed--compilation aborted. > > > > On Sat, 23 Oct 2004, Akshay Kumar wrote: > > > > > Fixed. > > > > > > Like Dominic pointed out bdb was broken. > > > > > > Making it with > > > > > > make LIBSO_LIBS="-lpthread" LIBXSO_LIBS="-lpthread" > > ah, thats it. thanks for reporting back the fix, this will probably help lots > of other redhat users who are scratching their heads over compilation :) > > > > fixed it. > > > > > > So now finally the following are working in /spare/local: > > > > > > bdb-4.2.52, SASL 2.1.19, Openldap 2.2.17, Sendmail 8.13.1, Cyrus 2.2.8, > > > apache and silkymail. > > > > > > Believe it or not there was a good reason for putting all of them in a > > > non-standard location. Namely the rdist setup at work overwrites > > > everything that is not precioused everyday at 4am. Updating the master > > > would have broken a lot of other mail servers that were not built with > > > SASLv2 and using old bdb and sendmail-8.12. Also sasl was not built with > > > ldap. > > on redhat you kinda have to build all this outside the main tree, as all their > default stuff is either ancient or broken. i've recently tried various other > distros and realise what a poor job redhat has been doing... > > dom > > > > I am going to wait for rhel as 4 till I build a new master, till then this > > > should work fine. > > > > > > > > > Thanks and Best, > > > Akshay > > > > > > On Sat, 23 Oct 2004, Dominic Ijichi wrote: > > > > > > > Quoting Akshay Kumar <[EMAIL PROTECTED]>: > > > > > > > > > Hi, > > > > > > > > > > Thanks for the reply. > > > > > > > > > > I am running Redhat 9 with updates from Progeny. I can't upgrade the OS > > > > > either. > > > > > > > > nice, lucky you :) > > > > > > > > > ldd -r /spare/local/lib/libdb-4.2.so give the following output: > > > > > > > > > > libc.so.6 => /lib/tls/libc.so.6 (0x42000000) > > > > > /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x55555000) > > > > > undefined symbol: pthread_condattr_setpshared > > > > > (/spare/local/lib/libdb-4.2.so) > > > > > undefined symbol: pthread_mutexattr_destroy > > > > > (/spare/local/lib/libdb-4.2.so) > > > > > undefined symbol: pthread_mutexattr_setpshared > > > > > (/spare/local/lib/libdb-4.2.so) > > > > > undefined symbol: pthread_mutexattr_init > > > > > (/spare/local/lib/libdb-4.2.so) > > > > > undefined symbol: pthread_mutex_trylock (/spare/local/lib/libdb-4.2.so) > > > > > > > > this means your berkeley db4.2 libs are broken. try recompiling with > > -lpthread. > > > > i think you can either try LIBS='-lpthread' ./configure, or run > > configure and > > > > amend resulting Makefile LIBS line with -lpthread. iirc, i had similar > > problems > > > > when redhat introduced ntpl thread libs out of the blue. > > > > > > > > > I also have the following rpms of an older version: > > > > > > > > > > db4-4.0.14-20 > > > > > db4-devel-4.0.14-20 > > > > > > > > ok, theoretically these shouldn't get in the way. > > > > > > > > > I can't uninstall them as I need this for other dependencies which is > > why > > > > > I am using /spare/local. > > > > > > > > fair enough. it is possible, although particularly with berkeley db4 not > > > > recommended, to force remove the rpms with 'rpm -e db4 db4-devel > > --nodeps' and > > > > drop the /spare/local/lib into ld.so.conf to fill in the gaps. i've done > > this > > > > numerous times on redhat with ssl and ldap where the libs dont vary quite > > as > > > > much from minor version to minor version, unfortunately with berkeley > > it's > > > > extremely sensitive and thus usually a really, really bad idea. > > > > > > > > > adding "LDFLAGS=-L/spare/local/lib -R/spare/local/lib" doesnt help > > either. > > > > > > > > hmm, this is more for solaris, i dont think it does much on linux. > > > > > > > > > /spare/local/lib is the top entry in ld.so.conf and I then ran > > ldconfig. > > > > > > > > unfortunately ldconfig silently inserts the 'system library paths' -ie > > /lib, > > > > /usr/lib before everything else. i dont know how to change this, > > although would > > > > love to know how. > > > > > > > > > Everything else picks up the correct version, SASL, Sendmail, Openldap. > > > > > > > > as you're specifying --bdb-libdir and its ignoring it, i would recommend > > looking > > > > in the config.log for the test for this switch. i'd hazard a guess and > > say it's > > > > failing because of the broken libraries, and thus falling back to the > > system db4 > > > > libs it finds in /usr/lib. fix these broken libs in /spare/local/lib and > > i > > > > suspect all will be well. > > > > > > > > good luck :) let us know if this helps, i'm sure i'm not the only one in > > the > > > > past who has come up against this problem. > > > > > > > > dom > > > > > > > > > > > > > > ldd ./sendmail > > > > > libsasl2.so.2 => /spare/local/lib/libsasl2.so.2 (0x2aad9000) > > > > > libdb-4.2.so => /spare/local/lib/libdb-4.2.so (0x2aaed000) > > > > > libpthread.so.0 => /lib/tls/libpthread.so.0 (0x2ab94000) > > > > > libssl.so.4 => /lib/libssl.so.4 (0x2aba2000) > > > > > libcrypto.so.4 => /lib/libcrypto.so.4 (0x2abd7000) > > > > > libresolv.so.2 => /lib/libresolv.so.2 (0x2acce000) > > > > > libcrypt.so.1 => /lib/libcrypt.so.1 (0x2ace0000) > > > > > libnsl.so.1 => /lib/libnsl.so.1 (0x2ad0e000) > > > > > libdl.so.2 => /lib/libdl.so.2 (0x2ad23000) > > > > > libldap-2.2.so.7 => /spare/local/lib/libldap-2.2.so.7 > > (0x2ad27000) > > > > > liblber-2.2.so.7 => /spare/local/lib/liblber-2.2.so.7 > > (0x2ad54000) > > > > > libc.so.6 => /lib/tls/libc.so.6 (0x42000000) > > > > > /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x2aaab000) > > > > > libgssapi_krb5.so.2 => /usr/kerberos/lib/libgssapi_krb5.so.2 > > > > > (0x2ad60000) > > > > > libkrb5.so.3 => /usr/kerberos/lib/libkrb5.so.3 (0x2ad74000) > > > > > libcom_err.so.3 => /usr/kerberos/lib/libcom_err.so.3 > > (0x2add2000) > > > > > libk5crypto.so.3 => /usr/kerberos/lib/libk5crypto.so.3 > > > > > (0x2add4000) > > > > > libz.so.1 => /usr/lib/libz.so.1 (0x2ade4000) > > > > > > > > > > ldd ./slapd > > > > > libdb-4.2.so => /spare/local/lib/libdb-4.2.so (0x2aad9000) > > > > > libsasl2.so.2 => /spare/local/lib/libsasl2.so.2 (0x2ab81000) > > > > > libssl.so.4 => /lib/libssl.so.4 (0x2ab94000) > > > > > libcrypto.so.4 => /lib/libcrypto.so.4 (0x2abc9000) > > > > > libresolv.so.2 => /lib/libresolv.so.2 (0x2acc0000) > > > > > libpthread.so.0 => /lib/tls/libpthread.so.0 (0x2acd2000) > > > > > libc.so.6 => /lib/tls/libc.so.6 (0x42000000) > > > > > libdl.so.2 => /lib/libdl.so.2 (0x2ace1000) > > > > > libgssapi_krb5.so.2 => /usr/kerberos/lib/libgssapi_krb5.so.2 > > > > > (0x2ace5000) > > > > > libkrb5.so.3 => /usr/kerberos/lib/libkrb5.so.3 (0x2acf8000) > > > > > libcom_err.so.3 => /usr/kerberos/lib/libcom_err.so.3 > > (0x2ad56000) > > > > > libk5crypto.so.3 => /usr/kerberos/lib/libk5crypto.so.3 > > > > > (0x2ad58000) > > > > > libz.so.1 => /usr/lib/libz.so.1 (0x2ad68000) > > > > > /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x2aaab000) > > > > > > > > > > and say for openldap I used this: > > > > > > > > > > > > > > > env "CPPFLAGS=-I/spare/local/include -I/usr/kerberos/include" > > > > > "LDFLAGS=-L/spare/local/lib" ./configure --prefix=/spare/local > > > > > --enable-ldap --enable-bdb > > > > > > > > > > > > > > > > > > > > Its just cyrus that has a problem with it, everything else finds the > > > > > correct version. > > > > > > > > > > > > > > > Best, > > > > > Akshay > > > > > > > > > > > > > > > > > > > > On Sat, 23 Oct 2004, Dominic Ijichi wrote: > > > > > > > > > > > Quoting Akshay Kumar <[EMAIL PROTECTED]>: > > > > > > > > > > > > > Has anyone had any luck using the lastest version of BDB 4.2.52 w/ > > the > > > > > > > cyrus 2.2.8? > > > > > > > > > > > > > > I compiled Berkeley DB 4.2.52. I also succesfully build sendmail, > > sasl > > > > > and > > > > > > > openldap against this version installed in /spare/local. > > > > > > > But I am having problems getting cyrus-imap to use this version. > > > > > > > > > > > > > > I tried: > > > > > > > > > > > > > > env "CPPFLAGS=-I/spare/local/include -I/usr/kerberos/include" > > > > > > > "LDFLAGS=-L/spare/local/lib" ./configure --prefix=/spare/local > > > > > > > --with-cyrus-prefix=/spare/local/cyrus --with-bdb=/spare/local > > > > > > > --with-bdb-libdir=/spare/local/lib > > > > > > > --with-bdb-incdir=/spare/local/include --with-snmp=/spare/local/lib > > > > > > > > > > > > > > make depend > > > > > > > make all CFLAGS=-O > > > > > > > > > > > > > > BDB is installed in /spare/local > > > > > > > > > > > > > > Syslog throws the following error: > > > > > > > > > > > > > > Oct 20 11:28:19 test ctl_cyrusdb[18987]: incorrect version of > > Berkeley > > > > > db: > > > > > > > compiled against 4.2.52, linked against 4.0.14 > > > > > > > > > > > > hi, you dont say what OS you're using, which doesnt help much here... > > > > > > > > > > > > looks like its picking up the correct db.h but not the correct > > libdb-4.so. > > > > > if > > > > > > its linux, make sure you haven't got the db4 and db4-devel rpms > > installed, > > > > > as > > > > > > even if you put /spare/local/lib in /etc/ld.so.conf it will still > > look in > > > > > > /usr/lib first which is where the system db4 rpm throws the libs. > > you > > > > > could try > > > > > > changing 'LDFLAGS=-L/spare/local/lib" to 'LDFLAGS=-L/spare/local/lib > > > > > > -R/spare/local/lib". if you use LD_LIBRARY_PATH, put > > /spare/local/lib in > > > > > first, > > > > > > or at least before /usr/lib. if you're using crle/ldconfig then i'm > > not > > > > > sure > > > > > > how you override the system lib paths, if you can at all, i usually > > > > > forcibly > > > > > > remove the system db4 rpms to eliminate any conflict,but this is not > > > > > advised > > > > > > unless you know the OS really well. > > > > > > > > > > > > oh, also make sure your libs have built correctly, do 'ldd -r > > > > > > /space/local/lib/libdb-4.2.so' and make sure you don't get any > > errors. > > > > > > > > > > > > ------------------------------------------ > > > > > > This message was penned by the hand of Dom > > > > > > > > > > > > > > > > > > ------------------------------------------ > > > > This message was penned by the hand of Dom > > > > --- > > > > Cyrus Home Page: http://asg.web.cmu.edu/cyrus > > > > Cyrus Wiki/FAQ: http://cyruswiki.andrew.cmu.edu > > > > List Archives/Info: http://asg.web.cmu.edu/cyrus/mailing-list.html > > > > > > > --- > > > Cyrus Home Page: http://asg.web.cmu.edu/cyrus > > > Cyrus Wiki/FAQ: http://cyruswiki.andrew.cmu.edu > > > List Archives/Info: http://asg.web.cmu.edu/cyrus/mailing-list.html > > > > > > ------------------------------------------ > This message was penned by the hand of Dom > --- > Cyrus Home Page: http://asg.web.cmu.edu/cyrus > Cyrus Wiki/FAQ: http://cyruswiki.andrew.cmu.edu > List Archives/Info: http://asg.web.cmu.edu/cyrus/mailing-list.html > --- Cyrus Home Page: http://asg.web.cmu.edu/cyrus Cyrus Wiki/FAQ: http://cyruswiki.andrew.cmu.edu List Archives/Info: http://asg.web.cmu.edu/cyrus/mailing-list.html