Dave Miner stated:
< Narendra Kumar S.S wrote:
< >Hello,
< >
< >     If I am using add_install_client, I can use -b option to specify 
< >the serial console on an x86 machine.
< >     If I want to do this manually, which are the files that I need to 
< >modify?
< >     And do I need to execute any command after making the modifications?
< >
< 
< The man page on add_install_client has a clue:
< 
<      -b property=value
< 
<          Set a property value in the client  specific  bootenv.rc
<          file  located  on  the  boot  server's  TFTP  directory,
<          /tftpboot by default. Use this option to set  boot  pro-
<          perties  that  are  specific to this client. You can use
<          the bootpath property to automate the selection  of  the
<          boot  device instead of manually using the Device Confi-
<          guration Assistant. You can use the  boot-args  property
<          to  automatically  select  a jumpstart installation. See
<          eeprom(1M).
< 
< 
< It could be more explicit, but typically you're looking for a file of 
< the form:
< 
< /tftpboot/<dhcp client id>.bootenv.rc

  The <dhcp client id>.bootenv.rc hasn't been used since S10FCS ?
  Since things went the way of grub and a miniroot archive.

  Instead of the bootenv.rc file, theres the /tftpboot/menu.lst.<dhcp client id>
  file.   You still have the '-b property=value' but it puts the settings in
  the menu.lst file. eg:

tftpboot# cat  menu.lst.0100C09FF4693F
default=0
timeout=30
title Solaris_10 Jumpstart
        kernel /I86PC.Solaris_10-88/multiboot kernel/unix - install dhcp  -B 
console=ttya
        module /I86PC.Solaris_10-88/x86.miniroot
tftpboot# 

  You don't need to do this manualy, add_install_client does the job.
Regards,

< 
< <dhcp client id> is, by default, constructed as a hex string consisting 
< of the media type code ("01" for Ethernet) plus the network interface 
< MAC address; it must be all-caps and must be zero-filled.  So for 
< example, a system with an Ethernet network interface MAC address of 
< 0:a:e4:34:30:7 would have a DHCP client id of 01000AE4343007.
< 
< And no, you don't need to run any commands after modifying the 
< bootenv.rc file; it will be automatically downloaded with tftp on the 
< next attempt to network boot the client.
< 
< Dave
< _______________________________________________
< install-discuss mailing list
< install-discuss at opensolaris.org
< http://opensolaris.org/mailman/listinfo/install-discuss

-- 
Sean.
.

Reply via email to