On 10/11/07, jason west <vespira at gmail.com> wrote: > Going back to the original computer, i installed the SCSI adapter > and placed a different SCSI HDD in the PC, downloaded a fresh copy > of 5.11, burned it, installed and... same thing :(
Is the original drive disconnected at this time? > If i boot to failsafe mode, i get to the console just fine... I am > at a complete loss as to why i cannot get a functional install of > 5.11 now on ANY PC, and am not sure how to begin troubleshooting an > O/S that crashes before any logging actually begins to take place. > :( Once you get to that point, what happens if you run "zpool import" at the root prompt? I have run into a ZFS bug recently that can cause a corrupt zpool to force the system into a panic loop. This affects S10U4 and snv_69 (5.11) but not S10U3. > any suggestions on what to try next? I have tried 3 motherboards > and CPUs, and several sticks of ram and different powersupplies... i > even swapped keyboard/mouse just to make sure nothing was kept > common between the machines. What common piece of hardware is there in the mix? I bet this is the culprit. -- Mike Gerdts http://mgerdts.blogspot.com/
