> We ran into this bug today using the Live upgrade > from Sol 10u3 - Sol 10u4. > > We are working in a sandbox environment and after > doing the whole process of getting the BE prepared, > we did not boot the zones again (to simulate the real > production environment). > > Live upgrade is running but you cannot boot a zone. > > This could be a problem in some customer environments > especially if the live upgrades takes longer to > complete. > > Any suggestions or work arounds except for unmounting > the live upgrade mount points. > > Alice
When you run luupgrade the AF (BE in 6477759) should be unmounted with luumount as a work around, for both 10u3 or if your using 10u4 as your BE, before you run lucreate/luupgrade run the smpatch analize ( if you had setup your sunsolve.sun.com account un the upgrade mamagement tool ) and apply all the patches shown in that order, then run from the DVD or setup_install_server jumpstart image the Solaris_1X/installer/upgrade20 this is recommended anyway as best practices and noted in the man pages in checkigng sunsovle.sun.com for the lates patches, I then I was able to lucreate, luupgrade and luactivate the AF env and boot into it. This message posted from opensolaris.org
