I think this is posted in a wrong place!
If you think the problem is with NFS, then post this question in that forum
and see if someone helps you there.
-Narendra
On 5/7/07, Vic Engle <victor.engle at gmail.com> wrote:
>
> I have been having a problem installing and configuring Solaris 10 update
> 3 on Sun x86 servers. The problem has occurred on v40z, X2100 and x4200
> systems.
>
> Basically the install itself goes smoothly and following the initial
> reboot, everything looks good. The system will boot up and configure
> networking with no problems. The problem seems to occur when the system is
> rebooted following some post install configuration which is routine
> configuration of nis, the automounter and some additional nfs mounts. The
> system continues to work as expected during this configuration but when the
> systems is rebooted it doesn't proceed into the boot process far enough to
> allow even a console login.
>
> In troubleshooting I have discovered that if I remove /etc/defaultrouoter
> the system will boot. Once booted if I try to manually add the default route
> the route command hangs.
>
> Has anyone seen this? I'll include the output of truss captured while
> trying to manually add the route. I follow the same procedure to configure
> Sol 10 sparc update 3 with no problem.
>
> Thanks,
> Vic
>
> [root at sunx4200-shu01--->]truss -f route add default 10.60.181.1
> 725: execve("/sbin/route", 0x08047A80, 0x08047A94) argc = 4
> 725: resolvepath("/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
> 725: resolvepath("/sbin/route", "/sbin/route", 1023) = 11
> 725: sysconfig(_CONFIG_PAGESIZE) = 4096
> 725: xstat(2, "/sbin/route", 0x08047878) = 0
> 725: open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT
> 725: xstat(2, "/lib/libsocket.so.1", 0x08047110) = 0
> 725: resolvepath("/lib/libsocket.so.1", "/lib/libsocket.so.1", 1023) =
> 19
> 725: open("/lib/libsocket.so.1", O_RDONLY) = 3
> 725: mmap(0x00010000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN,
> 3, 0) = 0xFEFC0000
> 725: mmap(0x00010000, 114688, PROT_NONE,
> MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFA0000
> 725: mmap(0xFEFA0000, 43330, PROT_READ|PROT_EXEC,
> MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEFA0000
> 725: mmap(0xFEFBB000, 2605, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 45056) = 0xFEFBB000
> 725: munmap(0xFEFAB000, 65536) = 0
> 725: memcntl(0xFEFA0000, 11632, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
> 725: close(3) = 0
> 725: mmap(0x00000000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFEF90000
> 725: xstat(2, "/lib/libnsl.so.1", 0x08047110) = 0
> 725: resolvepath("/lib/libnsl.so.1", "/lib/libnsl.so.1", 1023) = 16
> 725: open("/lib/libnsl.so.1", O_RDONLY) = 3
> 725: mmap(0xFEFC0000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED,
> 3, 0) = 0xFEFC0000
> 725: mmap(0x00010000, 577536, PROT_NONE,
> MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEF00000
> 725: mmap(0xFEF00000, 523373, PROT_READ|PROT_EXEC,
> MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEF00000
> 725: mmap(0xFEF80000, 19817, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 524288) = 0xFEF80000
> 725: mmap(0xFEF85000, 29984, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFEF85000
> 725: memcntl(0xFEF00000, 57484, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
> 725: close(3) = 0
> 725: xstat(2, "/lib/libc.so.1", 0x08047110) = 0
> 725: resolvepath("/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
> 725: open("/lib/libc.so.1", O_RDONLY) = 3
> 725: mmap(0xFEFC0000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED,
> 3, 0) = 0xFEFC0000
> 725: mmap(0x00010000, 851968, PROT_NONE,
> MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEE20000
> 725: mmap(0xFEE20000, 752085, PROT_READ|PROT_EXEC,
> MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEE20000
> 725: mmap(0xFEEE8000, 24303, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 753664) = 0xFEEE8000
> 725: mmap(0xFEEEE000, 5720, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFEEEE000
> 725: munmap(0xFEED8000, 65536) = 0
> 725: memcntl(0xFEE20000, 120620, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
> 725: close(3) = 0
> 725: munmap(0xFEFC0000, 4096) = 0
> 725: mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEE10000
> 725: getcontext(0x08047610)
> 725: getrlimit(RLIMIT_STACK, 0x08047608) = 0
> 725: getpid() = 725 [724]
> 725: lwp_private(0, 1, 0xFEE12000) = 0x000001C3
> 725: setustack(0xFEE12060)
> 725: sigfillset(0xFEEEE728) = 0
> 725: sysi86(SI86FPSTART, 0xFEEEED18, 0x0000133F, 0x00001F80) =
> 0x00000001
> 725: brk(0x08069C28) = 0
> 725: brk(0x0806BC28) = 0
> 725: getpid() = 725 [724]
>
>
> This message posted from opensolaris.org
> _______________________________________________
> install-discuss mailing list
> install-discuss at opensolaris.org
> http://opensolaris.org/mailman/listinfo/install-discuss
>
--
Warm Regards,
Narendra
Visit my blogs at:
http://ssnarendrakumar.blogspot.com/
http://blogs.sun.com/roller/page/ssnkumar
___ ___ __ _
/ __/ / __/ / | / /
_\ \ _ \ \ / /| |/ /
\___/ \___/ /_/ |__/
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://mail.opensolaris.org/pipermail/install-discuss/attachments/20070508/e1a670e0/attachment.html>
