On Thu, Dec 15, 2011 at 12:30:38PM -0800, Jesse Barnes wrote:
> More i9xx mode set cleanups, further simplifying the mode set path and
> making it easier to extend.
>
> Signed-off-by: Jesse Barnes <jbar...@virtuousgeek.org>
This is imo too much refactoring for just one patch. I'd like the extract
intel_update_lvds in a separate patch. That one intermingled with the
update_pll extraction makes things hard to follow.
Patches 1&2 of this series are queued for -next. Also, can we _please_
have the same treatment for ironlake_crtc_mode_set? That monstrositiy is
already around 450 lines and growing ...
Yours, Daniel
> ---
> drivers/gpu/drm/i915/intel_display.c | 402
> ++++++++++++++++++++--------------
> 1 files changed, 236 insertions(+), 166 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index b08089c..0eff163 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4848,7 +4848,7 @@ static void i9xx_update_pll_dividers(struct drm_crtc
> *crtc,
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> int pipe = intel_crtc->pipe;
> - u32 fp, fp2;
> + u32 fp, fp2 = 0;
>
> if (IS_PINEVIEW(dev)) {
> fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
> @@ -4874,6 +4874,233 @@ static void i9xx_update_pll_dividers(struct drm_crtc
> *crtc,
> }
> }
>
> +static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock,
> + struct drm_display_mode *adjusted_mode)
> +{
> + struct drm_device *dev = crtc->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + int pipe = intel_crtc->pipe;
> + u32 temp, lvds_sync = 0;
> +
> + temp = I915_READ(LVDS);
> + temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
> + if (pipe == 1) {
> + temp |= LVDS_PIPEB_SELECT;
> + } else {
> + temp &= ~LVDS_PIPEB_SELECT;
> + }
> + /* set the corresponsding LVDS_BORDER bit */
> + temp |= dev_priv->lvds_border_bits;
> + /* Set the B0-B3 data pairs corresponding to whether we're going to
> + * set the DPLLs for dual-channel mode or not.
> + */
> + if (clock->p2 == 7)
> + temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
> + else
> + temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
> +
> + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
> + * appropriately here, but we need to look more thoroughly into how
> + * panels behave in the two modes.
> + */
> + /* set the dithering flag on LVDS as needed */
> + if (INTEL_INFO(dev)->gen >= 4) {
> + if (dev_priv->lvds_dither)
> + temp |= LVDS_ENABLE_DITHER;
> + else
> + temp &= ~LVDS_ENABLE_DITHER;
> + }
> + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
> + lvds_sync |= LVDS_HSYNC_POLARITY;
> + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
> + lvds_sync |= LVDS_VSYNC_POLARITY;
> + if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
> + != lvds_sync) {
> + char flags[2] = "-+";
> + DRM_INFO("Changing LVDS panel from "
> + "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
> + flags[!(temp & LVDS_HSYNC_POLARITY)],
> + flags[!(temp & LVDS_VSYNC_POLARITY)],
> + flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
> + flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
> + temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
> + temp |= lvds_sync;
> + }
> + I915_WRITE(LVDS, temp);
> +}
> +
> +static void i9xx_update_pll(struct drm_crtc *crtc,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode,
> + intel_clock_t *clock, intel_clock_t *reduced_clock,
> + int num_connectors)
> +{
> + struct drm_device *dev = crtc->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + int pipe = intel_crtc->pipe;
> + u32 dpll;
> + bool is_sdvo;
> +
> + is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
> + intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
> +
> + dpll = DPLL_VGA_MODE_DIS;
> +
> + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
> + dpll |= DPLLB_MODE_LVDS;
> + else
> + dpll |= DPLLB_MODE_DAC_SERIAL;
> + if (is_sdvo) {
> + int pixel_multiplier =
> intel_mode_get_pixel_multiplier(adjusted_mode);
> + if (pixel_multiplier > 1) {
> + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
> + dpll |= (pixel_multiplier - 1) <<
> SDVO_MULTIPLIER_SHIFT_HIRES;
> + }
> + dpll |= DPLL_DVO_HIGH_SPEED;
> + }
> + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
> + dpll |= DPLL_DVO_HIGH_SPEED;
> +
> + /* compute bitmask from p1 value */
> + if (IS_PINEVIEW(dev))
> + dpll |= (1 << (clock->p1 - 1)) <<
> DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
> + else {
> + dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
> + if (IS_G4X(dev) && reduced_clock)
> + dpll |= (1 << (reduced_clock->p1 - 1)) <<
> DPLL_FPA1_P1_POST_DIV_SHIFT;
> + }
> + switch (clock->p2) {
> + case 5:
> + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
> + break;
> + case 7:
> + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
> + break;
> + case 10:
> + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
> + break;
> + case 14:
> + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
> + break;
> + }
> + if (INTEL_INFO(dev)->gen >= 4)
> + dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
> +
> + if (is_sdvo && intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
> + dpll |= PLL_REF_INPUT_TVCLKINBC;
> + else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
> + /* XXX: just matching BIOS for now */
> + /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
> + dpll |= 3;
> + else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
> + intel_panel_use_ssc(dev_priv) && num_connectors < 2)
> + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
> + else
> + dpll |= PLL_REF_INPUT_DREFCLK;
> +
> + dpll |= DPLL_VCO_ENABLE;
> + I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
> + POSTING_READ(DPLL(pipe));
> + udelay(150);
> +
> + /* The LVDS pin pair needs to be on before the DPLLs are enabled.
> + * This is an exception to the general rule that mode_set doesn't turn
> + * things on.
> + */
> + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
> + intel_update_lvds(crtc, clock, adjusted_mode);
> +
> + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
> + intel_dp_set_m_n(crtc, mode, adjusted_mode);
> +
> + I915_WRITE(DPLL(pipe), dpll);
> +
> + /* Wait for the clocks to stabilize. */
> + POSTING_READ(DPLL(pipe));
> + udelay(150);
> +
> + if (INTEL_INFO(dev)->gen >= 4) {
> + u32 temp = 0;
> + if (is_sdvo) {
> + temp = intel_mode_get_pixel_multiplier(adjusted_mode);
> + if (temp > 1)
> + temp = (temp - 1) <<
> DPLL_MD_UDI_MULTIPLIER_SHIFT;
> + else
> + temp = 0;
> + }
> + I915_WRITE(DPLL_MD(pipe), temp);
> + } else {
> + /* The pixel multiplier can only be updated once the
> + * DPLL is enabled and the clocks are stable.
> + *
> + * So write it again.
> + */
> + I915_WRITE(DPLL(pipe), dpll);
> + }
> +}
> +
> +static void i8xx_update_pll(struct drm_crtc *crtc,
> + struct drm_display_mode *adjusted_mode,
> + intel_clock_t *clock,
> + int num_connectors)
> +{
> + struct drm_device *dev = crtc->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + int pipe = intel_crtc->pipe;
> + u32 dpll;
> +
> + dpll = DPLL_VGA_MODE_DIS;
> +
> + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
> + dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
> + } else {
> + if (clock->p1 == 2)
> + dpll |= PLL_P1_DIVIDE_BY_TWO;
> + else
> + dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
> + if (clock->p2 == 4)
> + dpll |= PLL_P2_DIVIDE_BY_4;
> + }
> +
> + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
> + /* XXX: just matching BIOS for now */
> + /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
> + dpll |= 3;
> + else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
> + intel_panel_use_ssc(dev_priv) && num_connectors < 2)
> + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
> + else
> + dpll |= PLL_REF_INPUT_DREFCLK;
> +
> + dpll |= DPLL_VCO_ENABLE;
> + I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
> + POSTING_READ(DPLL(pipe));
> + udelay(150);
> +
> + /* The LVDS pin pair needs to be on before the DPLLs are enabled.
> + * This is an exception to the general rule that mode_set doesn't turn
> + * things on.
> + */
> + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
> + intel_update_lvds(crtc, clock, adjusted_mode);
> +
> + I915_WRITE(DPLL(pipe), dpll);
> +
> + /* Wait for the clocks to stabilize. */
> + POSTING_READ(DPLL(pipe));
> + udelay(150);
> +
> + /* The pixel multiplier can only be updated once the
> + * DPLL is enabled and the clocks are stable.
> + *
> + * So write it again.
> + */
> + I915_WRITE(DPLL(pipe), dpll);
> +}
> +
> static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
> struct drm_display_mode *mode,
> struct drm_display_mode *adjusted_mode,
> @@ -4887,15 +5114,13 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
> int plane = intel_crtc->plane;
> int refclk, num_connectors = 0;
> intel_clock_t clock, reduced_clock;
> - u32 dpll, dspcntr, pipeconf;
> - bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
> - bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
> + u32 dspcntr, pipeconf;
> + bool ok, has_reduced_clock = false, is_sdvo = false;
> + bool is_lvds = false, is_tv = false;
> struct drm_mode_config *mode_config = &dev->mode_config;
> struct intel_encoder *encoder;
> const intel_limit_t *limit;
> int ret;
> - u32 temp;
> - u32 lvds_sync = 0;
>
> list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
> if (encoder->base.crtc != crtc)
> @@ -4911,18 +5136,9 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
> if (encoder->needs_tv_clock)
> is_tv = true;
> break;
> - case INTEL_OUTPUT_DVO:
> - is_dvo = true;
> - break;
> case INTEL_OUTPUT_TVOUT:
> is_tv = true;
> break;
> - case INTEL_OUTPUT_ANALOG:
> - is_crt = true;
> - break;
> - case INTEL_OUTPUT_DISPLAYPORT:
> - is_dp = true;
> - break;
> }
>
> num_connectors++;
> @@ -4969,71 +5185,12 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
> i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ?
> &reduced_clock : NULL);
>
> - dpll = DPLL_VGA_MODE_DIS;
> -
> - if (!IS_GEN2(dev)) {
> - if (is_lvds)
> - dpll |= DPLLB_MODE_LVDS;
> - else
> - dpll |= DPLLB_MODE_DAC_SERIAL;
> - if (is_sdvo) {
> - int pixel_multiplier =
> intel_mode_get_pixel_multiplier(adjusted_mode);
> - if (pixel_multiplier > 1) {
> - if (IS_I945G(dev) || IS_I945GM(dev) ||
> IS_G33(dev))
> - dpll |= (pixel_multiplier - 1) <<
> SDVO_MULTIPLIER_SHIFT_HIRES;
> - }
> - dpll |= DPLL_DVO_HIGH_SPEED;
> - }
> - if (is_dp)
> - dpll |= DPLL_DVO_HIGH_SPEED;
> -
> - /* compute bitmask from p1 value */
> - if (IS_PINEVIEW(dev))
> - dpll |= (1 << (clock.p1 - 1)) <<
> DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
> - else {
> - dpll |= (1 << (clock.p1 - 1)) <<
> DPLL_FPA01_P1_POST_DIV_SHIFT;
> - if (IS_G4X(dev) && has_reduced_clock)
> - dpll |= (1 << (reduced_clock.p1 - 1)) <<
> DPLL_FPA1_P1_POST_DIV_SHIFT;
> - }
> - switch (clock.p2) {
> - case 5:
> - dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
> - break;
> - case 7:
> - dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
> - break;
> - case 10:
> - dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
> - break;
> - case 14:
> - dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
> - break;
> - }
> - if (INTEL_INFO(dev)->gen >= 4)
> - dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
> - } else {
> - if (is_lvds) {
> - dpll |= (1 << (clock.p1 - 1)) <<
> DPLL_FPA01_P1_POST_DIV_SHIFT;
> - } else {
> - if (clock.p1 == 2)
> - dpll |= PLL_P1_DIVIDE_BY_TWO;
> - else
> - dpll |= (clock.p1 - 2) <<
> DPLL_FPA01_P1_POST_DIV_SHIFT;
> - if (clock.p2 == 4)
> - dpll |= PLL_P2_DIVIDE_BY_4;
> - }
> - }
> -
> - if (is_sdvo && is_tv)
> - dpll |= PLL_REF_INPUT_TVCLKINBC;
> - else if (is_tv)
> - /* XXX: just matching BIOS for now */
> - /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
> - dpll |= 3;
> - else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
> - dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
> + if (IS_GEN2(dev))
> + i8xx_update_pll(crtc, adjusted_mode, &clock, num_connectors);
> else
> - dpll |= PLL_REF_INPUT_DREFCLK;
> + i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
> + has_reduced_clock ? &reduced_clock : NULL,
> + num_connectors);
>
> /* setup pipeconf */
> pipeconf = I915_READ(PIPECONF(pipe));
> @@ -5062,97 +5219,10 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
> pipeconf &= ~PIPECONF_DOUBLE_WIDE;
> }
>
> - dpll |= DPLL_VCO_ENABLE;
>
> DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
> drm_mode_debug_printmodeline(mode);
>
> - I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
> -
> - POSTING_READ(DPLL(pipe));
> - udelay(150);
> -
> - /* The LVDS pin pair needs to be on before the DPLLs are enabled.
> - * This is an exception to the general rule that mode_set doesn't turn
> - * things on.
> - */
> - if (is_lvds) {
> - temp = I915_READ(LVDS);
> - temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
> - if (pipe == 1) {
> - temp |= LVDS_PIPEB_SELECT;
> - } else {
> - temp &= ~LVDS_PIPEB_SELECT;
> - }
> - /* set the corresponsding LVDS_BORDER bit */
> - temp |= dev_priv->lvds_border_bits;
> - /* Set the B0-B3 data pairs corresponding to whether we're
> going to
> - * set the DPLLs for dual-channel mode or not.
> - */
> - if (clock.p2 == 7)
> - temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
> - else
> - temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
> -
> - /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
> - * appropriately here, but we need to look more thoroughly into
> how
> - * panels behave in the two modes.
> - */
> - /* set the dithering flag on LVDS as needed */
> - if (INTEL_INFO(dev)->gen >= 4) {
> - if (dev_priv->lvds_dither)
> - temp |= LVDS_ENABLE_DITHER;
> - else
> - temp &= ~LVDS_ENABLE_DITHER;
> - }
> - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
> - lvds_sync |= LVDS_HSYNC_POLARITY;
> - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
> - lvds_sync |= LVDS_VSYNC_POLARITY;
> - if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
> - != lvds_sync) {
> - char flags[2] = "-+";
> - DRM_INFO("Changing LVDS panel from "
> - "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
> - flags[!(temp & LVDS_HSYNC_POLARITY)],
> - flags[!(temp & LVDS_VSYNC_POLARITY)],
> - flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
> - flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
> - temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
> - temp |= lvds_sync;
> - }
> - I915_WRITE(LVDS, temp);
> - }
> -
> - if (is_dp) {
> - intel_dp_set_m_n(crtc, mode, adjusted_mode);
> - }
> -
> - I915_WRITE(DPLL(pipe), dpll);
> -
> - /* Wait for the clocks to stabilize. */
> - POSTING_READ(DPLL(pipe));
> - udelay(150);
> -
> - if (INTEL_INFO(dev)->gen >= 4) {
> - temp = 0;
> - if (is_sdvo) {
> - temp = intel_mode_get_pixel_multiplier(adjusted_mode);
> - if (temp > 1)
> - temp = (temp - 1) <<
> DPLL_MD_UDI_MULTIPLIER_SHIFT;
> - else
> - temp = 0;
> - }
> - I915_WRITE(DPLL_MD(pipe), temp);
> - } else {
> - /* The pixel multiplier can only be updated once the
> - * DPLL is enabled and the clocks are stable.
> - *
> - * So write it again.
> - */
> - I915_WRITE(DPLL(pipe), dpll);
> - }
> -
> if (HAS_PIPE_CXSR(dev)) {
> if (intel_crtc->lowfreq_avail) {
> DRM_DEBUG_KMS("enabling CxSR downclocking\n");
> --
> 1.7.4.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Mail: dan...@ffwll.ch
Mobile: +41 (0)79 365 57 48
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
