Currently i915 driver checks [PCH_]LVDS register bits to decide
whether to set up the dual-link or the single-link mode. This relies
implicitly on that BIOS initializes the register properly at boot.
However, BIOS doesn't initialize it always. When the machine is
booted with the closed lid, BIOS skips the LVDS reg initialization.
This ends up in blank output on a machine with a dual-link LVDS when
you open the lid after the boot.
This patch adds a workaround for that problem by checking the initial
LVDS register value in VBT.
Reviewed-by: Rodrigo Vivi <rodrigo.v...@gmail.com>
Reviewed-by: Adam Jackson <a...@redhat.com>
Signed-off-by: Takashi Iwai <ti...@suse.de>
---
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/intel_bios.c | 26 ++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++++++------
3 files changed, 47 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 9689ca3..8c8e488 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -376,6 +376,7 @@ typedef struct drm_i915_private {
unsigned int lvds_use_ssc:1;
unsigned int display_clock_mode:1;
int lvds_ssc_freq;
+ unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */
struct {
int rate;
int lanes;
diff --git a/drivers/gpu/drm/i915/intel_bios.c
b/drivers/gpu/drm/i915/intel_bios.c
index 63880e2..6b93f92 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -173,6 +173,27 @@ get_lvds_dvo_timing(const struct bdb_lvds_lfp_data
*lvds_lfp_data,
return (struct lvds_dvo_timing *)(entry + dvo_timing_offset);
}
+/* read the initial LVDS register value for the given panel mode */
+static unsigned int get_lvds_reg_val(const struct bdb_header *bdb,
+ const struct bdb_lvds_lfp_data_ptrs *ptrs,
+ int index,
+ struct drm_display_mode *mode)
+{
+ unsigned int ofs;
+ const struct lvds_fp_timing *timing;
+
+ if (index >= ARRAY_SIZE(ptrs->ptr))
+ return 0;
+ ofs = ptrs->ptr[index].fp_timing_offset;
+ if (ofs + sizeof(*timing) > bdb->bdb_size)
+ return 0;
+ timing = (const struct lvds_fp_timing *)((const u8 *)bdb + ofs);
+ /* check the resolution, just to be sure */
+ if (timing->x_res != mode->hdisplay || timing->y_res != mode->vdisplay)
+ return 0;
+ return timing->lvds_reg_val;
+}
+
/* Try to find integrated panel data */
static void
parse_lfp_panel_data(struct drm_i915_private *dev_priv,
@@ -243,6 +264,11 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
"Normal Clock %dKHz, downclock %dKHz\n",
panel_fixed_mode->clock, 10*downclock);
}
+
+ dev_priv->bios_lvds_val = get_lvds_reg_val(bdb, lvds_lfp_data_ptrs,
+ lvds_options->panel_type,
+ panel_fixed_mode);
+ DRM_DEBUG_KMS("VBT initial LVDS value %x\n", dev_priv->bios_lvds_val);
}
/* Try to find sdvo panel data */
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index f851db7..d7e6b76 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -356,6 +356,23 @@ static const intel_limit_t
intel_limits_ironlake_display_port = {
.find_pll = intel_find_pll_ironlake_dp,
};
+static bool is_dual_link_lvds(struct drm_i915_private *dev_priv,
+ unsigned int reg)
+{
+ unsigned int val;
+ /* BIOS should set the proper LVDS register value at boot, but
+ * in reality, it doesn't set the value when the lid is closed;
+ * thus when a machine is booted with the lid closed, the LVDS
+ * reg value can't be trusted. So we need to check "the value
+ * to be set" in VBT at first.
+ */
+ if (dev_priv->bios_lvds_val)
+ val = dev_priv->bios_lvds_val;
+ else
+ val = I915_READ(reg);
+ return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
+}
+
static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
int refclk)
{
@@ -364,8 +381,7 @@ static const intel_limit_t *intel_ironlake_limit(struct
drm_crtc *crtc,
const intel_limit_t *limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP) {
+ if (is_dual_link_lvds(dev_priv, PCH_LVDS)) {
/* LVDS dual channel */
if (refclk == 100000)
limit = &intel_limits_ironlake_dual_lvds_100m;
@@ -393,8 +409,7 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc
*crtc)
const intel_limit_t *limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
+ if (is_dual_link_lvds(dev_priv, LVDS))
/* LVDS with dual channel */
limit = &intel_limits_g4x_dual_channel_lvds;
else
@@ -531,8 +546,7 @@ intel_find_best_PLL(const intel_limit_t *limit, struct
drm_crtc *crtc,
* reliably set up different single/dual channel state, if we
* even can.
*/
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
+ if (is_dual_link_lvds(dev_priv, LVDS))
clock.p2 = limit->p2.p2_fast;
else
clock.p2 = limit->p2.p2_slow;
--
1.7.9.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
