On Fri, Oct 14, 2016 at 08:33:37PM +0000, Pandiyan, Dhinakaran wrote: > On Thu, 2016-10-13 at 21:44 +0300, Ville Syrjälä wrote: > > On Thu, Oct 13, 2016 at 11:04:19AM -0700, Dhinakaran Pandiyan wrote: > > > According to BSpec, cdclk has to be not less than 432 MHz with DP audio > > > enabled, port width x4, and link rate HBR2 (5.4 GHz) > > > > > > Having a lower cdclk triggers pipe underruns, which then lead to displays > > > continuously cycling off and on. This is essential for DP MST audio as the > > > link is trained at HBR2 and 4 lanes by default. > > > > > > This should fix https://bugs.freedesktop.org/show_bug.cgi?id=97907 > > > > > > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandi...@intel.com> > > > --- > > > drivers/gpu/drm/i915/intel_display.c | 47 > > > +++++++++++++++++++++++++++++++++--- > > > 1 file changed, 43 insertions(+), 4 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/i915/intel_display.c > > > b/drivers/gpu/drm/i915/intel_display.c > > > index cfcb03f..6a05183 100644 > > > --- a/drivers/gpu/drm/i915/intel_display.c > > > +++ b/drivers/gpu/drm/i915/intel_display.c > > > @@ -6603,14 +6603,43 @@ static int valleyview_modeset_calc_cdclk(struct > > > drm_atomic_state *state) > > > return 0; > > > } > > > > > > +static bool cdclk_min_for_dp_audio(struct drm_atomic_state *state) > > > +{ > > > + > > > + struct drm_crtc_state *crtc_state; > > > + struct drm_crtc *crtc; > > > + int i; > > > + > > > + /* BSpec says "Do not use DisplayPort with CDCLK less than 432 MHz, > > > + * audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else > > > + * there may be audio corruption or screen corruption." > > > + */ > > > + > > > + for_each_crtc_in_state(state, crtc, crtc_state, i) { > > > + struct intel_crtc_state *pipe_config = > > > + to_intel_crtc_state(crtc_state); > > > + > > > + return (intel_crtc_has_dp_encoder(pipe_config) && > > > + pipe_config->has_audio && > > > + pipe_config->port_clock == 540000 && > > > + pipe_config->lane_count == 4); > > > + } > > > > That's not good enough on account of crtcs not part of the state > > potentially needing the workaround as well. However, since we only do > > this when there's a modeset, I think we'll be covered by the > > connection_mutex, and so we should be able to peek at the current state > > of all crtcs without grabbing the corresponding crtc locks. > > > > Please correct me if I am wrong. Won't the first modeset that has all > the conditions met (DP + HBR2 + 4 lanes + audio) include the crtc > driving the display which triggered the modeset? > > Since, the new cdclk freq that will be set is common for all the crtcs, > we don't need the workaround for crtcs that are not in state.
There can be another modeset afterwards that doesn't need the w/a and that would then end up reducing cdclk below the required frequency. > > > So I think we'd be OK with something like: > > > > WARN_ON(!locked(connection_mutex)); > > > > for_each_intel_crtc() { > > /* > > * Peeking at the current state is safe since > > * we can only get here while holding the > > * connection_mutex. > > */ > > crtc_state = intel_get_existing_crtc_state(); > > if (!crtc_state) > > crtc_state = to_intel_crtc_state(crtc->base.state); > > > > ... > > } > > > > The other option would be to track the min cdclk for each pipe in the > > top level state I suppose. We already do that for the pixel rate > > actually so that we can calculate the cdclk to begin with. Hmm. Maybe > > we should just switch to tracking the min cdclk per pipe instead of the > > pixel rate. Or did we need to the pixel rate itself for something else, > > Maarten? > > > > Or we could perhaps replace the pixel rate/pixclk tracking with the peek > > approach entirely. Not quite sure. Would have to read the entire thing > > through. > > > > I thought of this, but the work around applies for only three platforms > (potentially just two) as of now. Does it warrant a driver wide change? > I have to check if mincdclk is useful elsewhere. We need to do one of these options. No way around it if we need this w/a. Though I guess it's a little bit of an open question at the moment since on SKL it only supposedly applies up to D stepping which we don't care about. On BDW it seems to be for everything though. > > > > + > > > + return false; > > > +} > > > + > > > static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state) > > > { > > > int max_pixclk = ilk_max_pixel_rate(state); > > > + int cdclk, min_cdclk = 0; > > > struct intel_atomic_state *intel_state = > > > to_intel_atomic_state(state); > > > > > > - intel_state->cdclk = intel_state->dev_cdclk = > > > - bxt_calc_cdclk(max_pixclk); > > > + if (cdclk_min_for_dp_audio(state)) > > > + min_cdclk = bxt_calc_cdclk(432000); > > > + > > > + cdclk = bxt_calc_cdclk(max_pixclk); > > > + intel_state->cdclk = intel_state->dev_cdclk = max(min_cdclk, cdclk); > > > > > > if (!intel_state->active_crtcs) > > > intel_state->dev_cdclk = bxt_calc_cdclk(0); > > > @@ -10374,7 +10403,10 @@ static int broadwell_modeset_calc_cdclk(struct > > > drm_atomic_state *state) > > > struct drm_i915_private *dev_priv = to_i915(state->dev); > > > struct intel_atomic_state *intel_state = to_intel_atomic_state(state); > > > int max_pixclk = ilk_max_pixel_rate(state); > > > - int cdclk; > > > + int cdclk, min_cdclk = 0; > > > + > > > + if (cdclk_min_for_dp_audio(state)) > > > + min_cdclk = broadwell_calc_cdclk(432000); > > > > > > /* > > > * FIXME should also account for plane ratio > > > @@ -10382,6 +10414,8 @@ static int broadwell_modeset_calc_cdclk(struct > > > drm_atomic_state *state) > > > */ > > > cdclk = broadwell_calc_cdclk(max_pixclk); > > > > > > + cdclk = max(min_cdclk, cdclk); > > > + > > > if (cdclk > dev_priv->max_cdclk_freq) { > > > DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n", > > > cdclk, dev_priv->max_cdclk_freq); > > > @@ -10411,7 +10445,10 @@ static int skl_modeset_calc_cdclk(struct > > > drm_atomic_state *state) > > > struct drm_i915_private *dev_priv = to_i915(state->dev); > > > const int max_pixclk = ilk_max_pixel_rate(state); > > > int vco = intel_state->cdclk_pll_vco; > > > - int cdclk; > > > + int cdclk, min_cdclk = 0; > > > + > > > + if (cdclk_min_for_dp_audio(state)) > > > + min_cdclk = skl_calc_cdclk(432000, vco); > > > > > > /* > > > * FIXME should also account for plane ratio > > > @@ -10419,6 +10456,8 @@ static int skl_modeset_calc_cdclk(struct > > > drm_atomic_state *state) > > > */ > > > cdclk = skl_calc_cdclk(max_pixclk, vco); > > > > > > + cdclk = max(min_cdclk, cdclk); > > > + > > > /* > > > * FIXME move the cdclk caclulation to > > > * compute_config() so we can fail gracegully. > > > -- > > > 2.7.4 > > > -- Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx