On ma, 2016-11-28 at 17:58 +0200, Ville Syrjälä wrote:
> On Mon, Nov 28, 2016 at 05:29:28PM +0200, Imre Deak wrote:
> > commit 848496e5902833600f7992f4faa82dc1546051ba
> > Author: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > Date: Wed Jul 13 16:32:03 2016 +0300
> >
> > drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on
> > SKL
> >
> > increased the timeout to match the spec, but we still see a timeout on
> > at least one SKL. A CDCLK change request following the failed one will
> > succeed nevertheless.
> >
> > I could reproduce this problem easily by running kms_pipe_crc_basic in a
> > loop. In all failure cases _wait_for() was pre-empted for >3ms and so in
> > the worst case - when the pre-emption happened right after calculating
> > timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only
> > once which failed and so _wait_for() timed out. As opposed to this the
> > spec says to keep retrying the request for at most a 3ms period.
> >
> > To fix this disable pre-emption to maximize the number of times we retry
> > the request. Also increase the timeout to 10ms to account for interrupts
> > that could reduce the number of these attempts. With this change I
> > couldn't trigger the problem.
> >
> > v2:
> > - Use 1ms poll period instead of 10us. (Chris)
> > v3:
> > - Poll with pre-emption disabled to increase the number of request
> > attempts. (Ville, Chris)
> > - Factor out a helper to poll, it's also needed by the next patch.
> > v4:
> > - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the
> > reply is generic. (Ville)
> >
> > Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > Cc: Chris Wilson <ch...@chris-wilson.co.uk>
> > Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929
> > Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B
> > Signed-off-by: Imre Deak <imre.d...@intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_drv.h | 2 ++
> > drivers/gpu/drm/i915/intel_display.c | 31 ++++++++---------------
> > drivers/gpu/drm/i915/intel_pm.c | 49
> > ++++++++++++++++++++++++++++++++++++
> > 3 files changed, 61 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h
> > b/drivers/gpu/drm/i915/i915_drv.h
> > index 01f5067..1be5bab 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -3593,6 +3593,8 @@ extern void intel_display_print_error_state(struct
> > drm_i915_error_state_buf *e,
> >
> > int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox,
> > u32 *val);
> > int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u32 mbox,
> > u32 val);
> > +int skl_pcode_request(struct drm_i915_private *dev_priv, u32 mbox, u32
> > request,
> > + u32 reply_mask, u32 reply);
> >
> > /* intel_sideband.c */
> > u32 vlv_punit_read(struct drm_i915_private *dev_priv, u32 addr);
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index 5d11002..3d220da 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -6245,35 +6245,24 @@ skl_dpll0_disable(struct drm_i915_private *dev_priv)
> > dev_priv->cdclk_pll.vco = 0;
> > }
> >
> > -static bool skl_cdclk_pcu_ready(struct drm_i915_private *dev_priv)
> > -{
> > - int ret;
> > - u32 val;
> > -
> > - /* inform PCU we want to change CDCLK */
> > - val = SKL_CDCLK_PREPARE_FOR_CHANGE;
> > - mutex_lock(&dev_priv->rps.hw_lock);
> > - ret = sandybridge_pcode_read(dev_priv, SKL_PCODE_CDCLK_CONTROL, &val);
> > - mutex_unlock(&dev_priv->rps.hw_lock);
> > -
> > - return ret == 0 && (val & SKL_CDCLK_READY_FOR_CHANGE);
> > -}
> > -
> > -static bool skl_cdclk_wait_for_pcu_ready(struct drm_i915_private *dev_priv)
> > -{
> > - return _wait_for(skl_cdclk_pcu_ready(dev_priv), 3000, 10) == 0;
> > -}
> > -
> > static void skl_set_cdclk(struct drm_i915_private *dev_priv, int cdclk,
> > int vco)
> > {
> > u32 freq_select, pcu_ack;
> > + int ret;
> >
> > WARN_ON((cdclk == 24000) != (vco == 0));
> >
> > DRM_DEBUG_DRIVER("Changing CDCLK to %d kHz (VCO %d kHz)\n", cdclk, vco);
> >
> > - if (!skl_cdclk_wait_for_pcu_ready(dev_priv)) {
> > - DRM_ERROR("failed to inform PCU about cdclk change\n");
> > + mutex_lock(&dev_priv->rps.hw_lock);
> > + ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
> > + SKL_CDCLK_PREPARE_FOR_CHANGE,
> > + SKL_CDCLK_READY_FOR_CHANGE,
> > + SKL_CDCLK_READY_FOR_CHANGE);
> > + mutex_unlock(&dev_priv->rps.hw_lock);
> > + if (ret) {
> > + DRM_ERROR("Failed to inform PCU about cdclk change (%d)\n",
> > + ret);
> > return;
> > }
> >
> > diff --git a/drivers/gpu/drm/i915/intel_pm.c
> > b/drivers/gpu/drm/i915/intel_pm.c
> > index 66c62f3..aed88e0 100644
> > --- a/drivers/gpu/drm/i915/intel_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > @@ -7864,6 +7864,55 @@ int sandybridge_pcode_write(struct drm_i915_private
> > *dev_priv,
> > return 0;
> > }
> >
> > +static bool skl_pcode_try_request(struct drm_i915_private *dev_priv, u32
> > mbox,
> > + u32 request, u32 reply_mask, u32 reply,
> > + u32 *status)
> > +{
> > + u32 val = request;
> > +
> > + *status = sandybridge_pcode_read(dev_priv, mbox, &val);
> > +
> > + return *status || ((val & reply_mask) == reply);
> > +}
> > +
> > +/**
> > + * skl_pcode_request - send PCODE request until acknowledgment
> > + * @dev_priv: device private
> > + * @mbox: PCODE mailbox ID the request is targeted for
> > + * @request: request ID
> > + * @reply_mask: mask used to check for request acknowledgment
> > + * @reply: value used to check for request acknowledgement
> > + *
> > + * Keep resending the @request to @mbox until PCODE acknowledges it, PCODE
> > + * reports an error or a 10ms timeout expires. The request is acknowledged
> > + * once the PCODE reply dword equals @reply after aplying @reply_mask.
> > + *
> > + * Returns 0 on success, %-ETIMEDOUT in case of a timeout, <0 in case of
> > some
> > + * other error as reported by PCODE.
> > + */
> > +int skl_pcode_request(struct drm_i915_private *dev_priv, u32 mbox, u32
> > request,
> > + u32 reply_mask, u32 reply)
> > +{
> > + u32 status;
> > + int ret;
> > +
> > + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
> > +
> > + /*
> > + * The spec says to keep retrying the request for at most 3ms until
>
> This comment seems a little misplaced. The 3ms is specified for the
> cdclk prep request, SAGV will have a different value.
> If we don't want callers to pass in the timeout as well, I guess we'll
> at least want to reword this comment to say which callers need what
> kind of timeouts.
How about "at most 3ms - which can be less depending on the given
request"?
> Though I kinda like the idea of callers passing that
> in as well.
The 10ms timeout I chose here is anyway an upper bound, considering
that interrupts could reduce the number of requests we can send. Hence
thought to make it a generic value.
>
> > + * acknowledgement, so disable pre-emption to maximize the number of
> > + * attempts within this duration. Use a 10ms overall timeout to
> > + * account for interrupts that could reduce the number of attempts.
> > + */
> > + preempt_disable();
> > + ret = wait_for_atomic(skl_pcode_try_request(dev_priv, mbox, request,
> > + reply_mask, reply, &status),
> > + 10);
> > + preempt_enable();
> > +
> > + return ret ? ret : status;
> > +}
> > +
> > static int byt_gpu_freq(struct drm_i915_private *dev_priv, int val)
> > {
> > /*
> > --
> > 2.5.0
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
