On Sat, Jan 07, 2017 at 11:42:04PM +0530, vathsala nagaraju wrote:
> As per bpsec, CHICKEN_TRANS_EDP bit 12 ,15
> must be programmed.
> Enable bit 12 for programmable header packet.
> Enable bit 15 for Y cordinate support.
>
> v2: (Rodrigo)
> - move CHICKEN_TRANS_EDP bit set logic right after setup_vsc
>
> v3:(Rodrigo)
> - initialize chicken_trans to CHICKEN_TRANS_BIT12 instead of 0
>
> v4:(Rodrigo)
> - initialize chicken_trans=0,add chicken_trans=CHICKEN_TRANS_BIT12
Weird. Just scope the variable properly, use the correct type.
> Cc: Rodrigo Vivi <rodrigo.v...@intel.com>
> Cc: Jim Bride <jim.br...@linux.intel.com>
> Signed-off-by: vathsala nagaraju <vathsala.nagar...@intel.com>
> Signed-off-by: Patil Deepti <deepti.pa...@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 7 +++++++
> drivers/gpu/drm/i915/intel_psr.c | 7 +++++++
> 2 files changed, 14 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 7830e6e..5ca506a 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6449,6 +6449,13 @@ enum {
> #define BDW_DPRS_MASK_VBLANK_SRD (1 << 0)
> #define CHICKEN_PIPESL_1(pipe) _MMIO_PIPE(pipe, _CHICKEN_PIPESL_1_A,
> _CHICKEN_PIPESL_1_B)
>
> +#define CHICKEN_TRANS_A 0x420c0
> +#define CHICKEN_TRANS_B 0x420c4
> +#define CHICKEN_TRANS(trans) _MMIO_TRANS(trans, CHICKEN_TRANS_A,
> CHICKEN_TRANS_B)
> +#define TRANS_EDP 3
> +#define CHICKEN_TRANS_BIT12 (1<<12)
> +#define CHICKEN_TRANS_BIT15 (1<<15)
Useless naming. Either given them proper names or don't.
> if (!HAS_PSR(dev_priv)) {
u32 chicken;
> DRM_DEBUG_KMS("PSR not supported on this platform\n");
> @@ -505,6 +506,12 @@ void intel_psr_enable(struct intel_dp *intel_dp)
> dev_priv->psr.psr2_support = false;
> else
> skl_psr_setup_su_vsc(intel_dp);
> + /* Set CHICKEN_TRANS_BIT12 for programable header */
> + chicken_trans = CHICKEN_TRANS_BIT12;
We can see you are setting CHICKEN_TRANS_BIT12, so don't bother
repeating that. What programmable header? Why is this in a chicken bit,
what is the bspec reference, all of those would be useful to answer.
> + /* Set CHICKEN_TRANS_BIT15 if Y coordinate is supported
> */
> + if (dev_priv->psr.y_cord_support)
> + chicken_trans |= CHICKEN_TRANS_BIT15;
Again. Tell us why, we can read the code. Are the names meaningful? More
meaningful than chicken |= BIT(15); ?
> + I915_WRITE(CHICKEN_TRANS(TRANS_EDP), chicken_trans);
> } else {
> /* set up vsc header for psr1 */
> hsw_psr_setup_vsc(intel_dp);
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
