After initiating a sideband transaction, we only want to wait for the
transaction to become idle. If, as we are, we wait for both the busy
and error flag to clear, if an error is raised we just spin until the
timeout. Once the hw is idle, we can then check to see if the hw flagged
an error, and report it distinctly.

Signed-off-by: Chris Wilson <ch...@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nik...@intel.com>
---
 drivers/gpu/drm/i915/intel_sideband.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sideband.c 
b/drivers/gpu/drm/i915/intel_sideband.c
index 9f782b5eb6e6..41712ea9f5f8 100644
--- a/drivers/gpu/drm/i915/intel_sideband.c
+++ b/drivers/gpu/drm/i915/intel_sideband.c
@@ -216,6 +216,7 @@ u32 intel_sbi_read(struct drm_i915_private *dev_priv, u16 
reg,
        }
 
        I915_WRITE(SBI_ADDR, (reg << 16));
+       I915_WRITE(SBI_DATA, 0);
 
        if (destination == SBI_ICLK)
                value = SBI_CTL_DEST_ICLK | SBI_CTL_OP_CRRD;
@@ -225,10 +226,15 @@ u32 intel_sbi_read(struct drm_i915_private *dev_priv, u16 
reg,
 
        if (intel_wait_for_register(dev_priv,
                                    SBI_CTL_STAT,
-                                   SBI_BUSY | SBI_RESPONSE_FAIL,
+                                   SBI_BUSY,
                                    0,
                                    100)) {
-               DRM_ERROR("timeout waiting for SBI to complete read 
transaction\n");
+               DRM_ERROR("timeout waiting for SBI to complete read\n");
+               return 0;
+
+       }
+       if (I915_READ(SBI_CTL_STAT) & SBI_RESPONSE_FAIL) {
+               DRM_ERROR("error during SBI read of reg %x\n", reg);
                return 0;
        }
 
@@ -260,10 +266,16 @@ void intel_sbi_write(struct drm_i915_private *dev_priv, 
u16 reg, u32 value,
 
        if (intel_wait_for_register(dev_priv,
                                    SBI_CTL_STAT,
-                                   SBI_BUSY | SBI_RESPONSE_FAIL,
+                                   SBI_BUSY,
                                    0,
                                    100)) {
-               DRM_ERROR("timeout waiting for SBI to complete write 
transaction\n");
+               DRM_ERROR("timeout waiting for SBI to complete write\n");
+               return;
+       }
+
+       if (I915_READ(SBI_CTL_STAT) & SBI_RESPONSE_FAIL) {
+               DRM_ERROR("error during SBI write of %x to reg %x\n",
+                         value, reg);
                return;
        }
 }
-- 
2.11.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to