Now that we are no longer bound to the drm_panel_ callbacks, call
MIPI_SEQ_POWER_ON/OFF at the proper place.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paa...@intel.com>
---
drivers/gpu/drm/i915/intel_dsi.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index b460c5c..aee1f2e 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -622,10 +622,10 @@ static void intel_dsi_pre_enable(struct intel_encoder
*encoder,
intel_dsi_prepare(encoder, pipe_config);
- /* Panel Enable over CRC PMIC */
+ /* Power on, try both CRC pmic gpio and VBT */
if (intel_dsi->gpio_panel)
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
-
+ intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_POWER_ON);
msleep(intel_dsi->panel_on_delay);
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
@@ -640,7 +640,6 @@ static void intel_dsi_pre_enable(struct intel_encoder
*encoder,
/* put device in ready state */
intel_dsi_device_ready(encoder);
- intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_POWER_ON);
intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET);
intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_INIT_OTP);
@@ -758,11 +757,10 @@ static void intel_dsi_post_disable(struct intel_encoder
*encoder,
}
intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_ASSERT_RESET);
- intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_POWER_OFF);
+ /* Power off, try both CRC pmic gpio and VBT */
msleep(intel_dsi->panel_off_delay);
-
- /* Panel Disable over CRC PMIC */
+ intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_POWER_OFF);
if (intel_dsi->gpio_panel)
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
--
2.9.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
