On 9/21/2017 8:37 PM, Michal Wajdeczko wrote:
On Tue, 19 Sep 2017 19:42:00 +0200, Sagar Arun Kamble <sagar.a.kam...@intel.com> wrote:Will pull them together. It was to allow new interfaces to make use of the functionality in slpc.c.This patch adds two debugfs interfaces: 1. i915_slpc_paramlist: List of all parameters that Host can configure. Currently listing id and description of each. 2. i915_slpc_param_ctl: This allows to change the parameters. Syntax is: echo "write <id> <value>" > i915_slpc_param_ctl. echo "read <id>" > i915_slpc_param_ctl; cat i915_slpc_param_ctl revert allows to set to default SLPC internal values. Syntax is: echo "revert <id>" > i915_slpc_param_ctl. Added support to set/read parameters and unset the parameters which will revert them to default SLPC internal values. Also added RPM ref. coveraround set/unset calls. Explicit SLPC reset is needed on setting/unsettingsome of the parameters. Signed-off-by: Sagar Arun Kamble <sagar.a.kam...@intel.com> --- drivers/gpu/drm/i915/i915_debugfs.c | 19 +++++drivers/gpu/drm/i915/intel_slpc.c | 158 ++++++++++++++++++++++++++++++++++++drivers/gpu/drm/i915/intel_slpc.h | 6 ++ 3 files changed, 183 insertions(+)diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.cindex dbfe185..0a04f3d 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c@@ -2352,6 +2352,23 @@ static int i915_huc_load_status_info(struct seq_file *m, void *data)return 0; } +static int i915_slpc_paramlist_info(struct seq_file *m, void *data)I'm little confused that part of the debugfs functionality is done here while other part in slpc.c
+{ + struct drm_i915_private *dev_priv = node_to_i915(m->private); + int i; + + if (!dev_priv->guc.slpc.active) {intel_slpc_active() ?
yes. will update.
+ seq_puts(m, "SLPC not active\n"); + return 0; + } + + seq_puts(m, "Param id\tParam description\n"); + for (i = 0; i < SLPC_MAX_PARAM; i++) + seq_printf(m, "%8d\t%s\n", slpc_paramlist[i].id, + slpc_paramlist[i].description);What if size of slpc_paramlist[] will be smaller than i ?
will add the size checks.
+ return 0; +} + static int i915_guc_load_status_info(struct seq_file *m, void *data) { struct drm_i915_private *dev_priv = node_to_i915(m->private);@@ -4881,6 +4898,7 @@ static int i915_hpd_storm_ctl_open(struct inode *inode, struct file *file){"i915_guc_load_err_log_dump", i915_guc_log_dump, 0, (void *)1}, {"i915_guc_stage_pool", i915_guc_stage_pool, 0}, {"i915_huc_load_status", i915_huc_load_status_info, 0}, + {"i915_slpc_paramlist", i915_slpc_paramlist_info, 0}, {"i915_frequency_info", i915_frequency_info, 0}, {"i915_hangcheck_info", i915_hangcheck_info, 0}, {"i915_reset_info", i915_reset_info, 0},@@ -4944,6 +4962,7 @@ static int i915_hpd_storm_ctl_open(struct inode *inode, struct file *file){"i915_dp_test_type", &i915_displayport_test_type_fops}, {"i915_dp_test_active", &i915_displayport_test_active_fops}, {"i915_guc_log_control", &i915_guc_log_control_fops}, + {"i915_slpc_param_ctl", &i915_slpc_param_ctl_fops}, {"i915_hpd_storm_ctl", &i915_hpd_storm_ctl_fops}, {"i915_ipc_status", &i915_ipc_status_fops} };diff --git a/drivers/gpu/drm/i915/intel_slpc.c b/drivers/gpu/drm/i915/intel_slpc.cindex d0fd402..0c094f0 100644 --- a/drivers/gpu/drm/i915/intel_slpc.c +++ b/drivers/gpu/drm/i915/intel_slpc.c @@ -25,6 +25,8 @@ #include <asm/msr-index.h> #include "i915_drv.h" #include "intel_uc.h" +#include <linux/seq_file.h> +#include <linux/debugfs.h> struct slpc_param slpc_paramlist[SLPC_MAX_PARAM] = { {SLPC_PARAM_TASK_ENABLE_GTPERF, "Enable task GTPERF"}, @@ -684,3 +686,159 @@ void intel_slpc_disable(struct intel_slpc *slpc) slpc->active = false; } + +static int slpc_param_ctl_show(struct seq_file *m, void *data) +{ + struct drm_i915_private *dev_priv = m->private; + struct intel_slpc *slpc = &dev_priv->guc.slpc; + + if (!slpc->active) {intel_slpc_active() ?
yes. will update.
+ seq_puts(m, "SLPC not active\n"); + return 0; + } + + seq_printf(m, "%s=%u, override=%s\n", + slpc_paramlist[slpc->debug_param_id].description, + slpc->debug_param_value, + yesno(!!slpc->debug_param_override)); +What if slpc->debug_param_id >= SLPC_MAX_PARAM or sizeof paramlist ?
will add the check.
ok. will bring that closer. Thinking was to keep all drm/i915/slpc patches together.+ return 0; +} + +static int slpc_param_ctl_open(struct inode *inode, struct file *file) +{ + return single_open(file, slpc_param_ctl_show, inode->i_private); +} + +static const char *read_token = "read", *write_token = "write", + *revert_token = "revert"; + +/* + * Parse SLPC parameter control strings: (Similar to Pipe CRC handling) + * command: wsp* op wsp+ param id wsp+ [value] wsp* + * op: "read"/"write"/"revert" + * param id: slpc_param_id + * value: u32 value + * wsp: (#0x20 | #0x9 | #0xA)+ + * + * eg.: + * "read 0" -> read SLPC_PARAM_TASK_ENABLE_GTPERF+ * "write 7 500" -> set SLPC_PARAM_GLOBAL_MIN_GT_SLICE_FREQ_MHZ to 500MHz + * "revert 7" -> revert SLPC_PARAM_GLOBAL_MIN_GT_SLICE_FREQ_MHZ to+ * default value. + */ +static int slpc_param_ctl_parse(char *buf, size_t len, char **op, + u32 *id, u32 *value) +{ +#define MAX_WORDS 3 + int n_words; + char *words[MAX_WORDS]; + ssize_t ret; + + n_words = buffer_tokenize(buf, words, MAX_WORDS);Ha! finally found the purpose of the patch 001 Please try to keep them closer.
+ if (!(n_words == 3) && !(n_words == 2)) { + DRM_DEBUG_DRIVER("tokenize failed, a command is %d words\n", + MAX_WORDS); + return -EINVAL; + } ++ if (strcmp(words[0], read_token) && strcmp(words[0], write_token) &&+ strcmp(words[0], revert_token)) { + DRM_DEBUG_DRIVER("unknown operation\n");Please add operation word into message for easier debug
It is there. :) Did you mean "unknown operation word" ?
+ return -EINVAL; + } + + *op = words[0];Hmm, this will cause yet another strcmp - try to convert into OP code.
Ok. will update.
+ + ret = kstrtou32(words[1], 0, id); + if (ret) + return ret; + + if (n_words == 3) { + ret = kstrtou32(words[2], 0, value); + if (ret) + return ret; + } + + return 0;Shouldn't we return n_words-1 to easier catch any missing params?
Yes. Will add this.
+} ++static ssize_t slpc_param_ctl_write(struct file *file, const char __user *ubuf,+ size_t len, loff_t *offp) +{ + struct seq_file *m = file->private_data; + struct drm_i915_private *dev_priv = m->private; + struct intel_slpc *slpc = &dev_priv->guc.slpc; + char *tmpbuf, *op = NULL; + u32 id, value; + int ret; + + if (len == 0) + return 0; + + if (len > 40) { + DRM_DEBUG_DRIVER("expected <40 chars into slpc_param_ctl\n"); + return -E2BIG; + } + + tmpbuf = kmalloc(len + 1, GFP_KERNEL); + if (!tmpbuf) + return -ENOMEM; + + if (copy_from_user(tmpbuf, ubuf, len)) { + ret = -EFAULT; + goto out; + } + tmpbuf[len] = '\0'; + + ret = slpc_param_ctl_parse(tmpbuf, len, &op, &id, &value);'ret' is not checked for errors
Will check now with above return fixed.
+ + if (id >= SLPC_MAX_PARAM) { + ret = -EINVAL; + goto out; + } + + if (!strcmp(op, read_token)) { + intel_slpc_get_param(slpc, id, + &slpc->debug_param_override, + &slpc->debug_param_value); + slpc->debug_param_id = id; + } else if (!strcmp(op, write_token) || !strcmp(op, revert_token)) { + if ((id >= SLPC_PARAM_TASK_ENABLE_GTPERF) && + (id <= SLPC_PARAM_TASK_DISABLE_DCC)) { + DRM_DEBUG_DRIVER("Tasks are not controlled by " + "this interface\n"); + ret = -EINVAL; + goto out; + } + + /* + * After updating parameters, RESET event has to be sent to GuC + * SLPC for ensuring parameters take effect. + */ + intel_runtime_pm_get(dev_priv); + if (!strcmp(op, write_token)) + intel_slpc_set_param(slpc, id, value); + else if (!strcmp(op, revert_token)) + intel_slpc_unset_param(slpc, id); + intel_slpc_enable(slpc); + intel_runtime_pm_put(dev_priv); + } + +out: + kfree(tmpbuf); + if (ret < 0) + return ret; + + *offp += len; + return len; +} + +const struct file_operations i915_slpc_param_ctl_fops = { + .owner = THIS_MODULE, + .open = slpc_param_ctl_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = slpc_param_ctl_write +};diff --git a/drivers/gpu/drm/i915/intel_slpc.h b/drivers/gpu/drm/i915/intel_slpc.hindex ae857d3..e49c513 100644 --- a/drivers/gpu/drm/i915/intel_slpc.h +++ b/drivers/gpu/drm/i915/intel_slpc.h @@ -32,6 +32,10 @@ struct intel_slpc { /* i915 cached SLPC frequency limits */ u32 min_unslice_freq; u32 max_unslice_freq; + + u32 debug_param_id; + u32 debug_param_value; + u32 debug_param_override;Group above under 'debug' sub-struct
Sure.
}; static inline int intel_slpc_enabled(void) @@ -251,6 +255,8 @@ struct slpc_param { #define SLPC_PARAM_TASK_DISABLED 2 #define SLPC_PARAM_TASK_UNKNOWN 3 +extern const struct file_operations i915_slpc_param_ctl_fops; + /* intel_slpc.c */ void intel_slpc_set_param(struct intel_slpc *slpc, u32 id, u32 value); void intel_slpc_unset_param(struct intel_slpc *slpc, u32 id);
_______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx