On Wed, 11 Oct 2017, Jani Nikula <jani.nik...@linux.intel.com> wrote:
> On Tue, 10 Oct 2017, Ville Syrjala <ville.syrj...@linux.intel.com> wrote:
>> From: Ville Syrjälä <ville.syrj...@linux.intel.com>
>>
>> Untangle intel_enable_ddi() by splitting it into DP and HDMI specific
>> variants.
>>
>> v2: Keep using intel_ddi_get_encoder_port() for now
>>
>> Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
>> ---
>>  drivers/gpu/drm/i915/intel_ddi.c | 86 
>> +++++++++++++++++++++++-----------------
>>  1 file changed, 49 insertions(+), 37 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_ddi.c 
>> b/drivers/gpu/drm/i915/intel_ddi.c
>> index 49cf8d9d2bc1..18bf06c7e43f 100644
>> --- a/drivers/gpu/drm/i915/intel_ddi.c
>> +++ b/drivers/gpu/drm/i915/intel_ddi.c
>> @@ -2369,45 +2369,57 @@ void intel_ddi_fdi_post_disable(struct intel_encoder 
>> *encoder,
>>      I915_WRITE(FDI_RX_CTL(PIPE_A), val);
>>  }
>>  
>> -static void intel_enable_ddi(struct intel_encoder *intel_encoder,
>> -                         const struct intel_crtc_state *pipe_config,
>> +static void intel_enable_ddi_dp(struct intel_encoder *encoder,
>> +                            const struct intel_crtc_state *crtc_state,
>> +                            const struct drm_connector_state *conn_state)
>> +{
>> +    struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>> +    struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
>> +    enum port port = intel_ddi_get_encoder_port(encoder);
>> +
>> +    if (port == PORT_A && INTEL_GEN(dev_priv) < 9)
>> +            intel_dp_stop_link_train(intel_dp);

I note that this was only run on type == INTEL_OUTPUT_EDP previously. I
suppose the condition does effectively imply edp, so this is probably
fine. It's just that sometimes I wonder about the amount of background
knowledge like this that we impose on the reader.

>> +
>> +    intel_edp_backlight_on(crtc_state, conn_state);
>> +    intel_psr_enable(intel_dp, crtc_state);
>
> This is broken without edp check.

And fine now with 4d90f2d507ab ("drm/i915: Start tracking PSR state in
crtc state") merged.

Reviewed-by: Jani Nikula <jani.nik...@intel.com>


>
> BR, Jani.
>
>
>> +    intel_edp_drrs_enable(intel_dp, crtc_state);
>> +
>> +    if (crtc_state->has_audio)
>> +            intel_audio_codec_enable(encoder, crtc_state, conn_state);
>> +}
>> +
>> +static void intel_enable_ddi_hdmi(struct intel_encoder *encoder,
>> +                              const struct intel_crtc_state *crtc_state,
>> +                              const struct drm_connector_state *conn_state)
>> +{
>> +    struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>> +    struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
>> +    enum port port = intel_ddi_get_encoder_port(encoder);
>> +
>> +    intel_hdmi_handle_sink_scrambling(encoder,
>> +                                      conn_state->connector,
>> +                                      
>> crtc_state->hdmi_high_tmds_clock_ratio,
>> +                                      crtc_state->hdmi_scrambling);
>> +
>> +    /* In HDMI/DVI mode, the port width, and swing/emphasis values
>> +     * are ignored so nothing special needs to be done besides
>> +     * enabling the port.
>> +     */
>> +    I915_WRITE(DDI_BUF_CTL(port),
>> +               dig_port->saved_port_bits | DDI_BUF_CTL_ENABLE);
>> +
>> +    if (crtc_state->has_audio)
>> +            intel_audio_codec_enable(encoder, crtc_state, conn_state);
>> +}
>> +
>> +static void intel_enable_ddi(struct intel_encoder *encoder,
>> +                         const struct intel_crtc_state *crtc_state,
>>                           const struct drm_connector_state *conn_state)
>>  {
>> -    struct drm_encoder *encoder = &intel_encoder->base;
>> -    struct drm_i915_private *dev_priv = to_i915(encoder->dev);
>> -    enum port port = intel_ddi_get_encoder_port(intel_encoder);
>> -    int type = intel_encoder->type;
>> -
>> -    if (type == INTEL_OUTPUT_HDMI) {
>> -            struct intel_digital_port *intel_dig_port =
>> -                    enc_to_dig_port(encoder);
>> -            bool clock_ratio = pipe_config->hdmi_high_tmds_clock_ratio;
>> -            bool scrambling = pipe_config->hdmi_scrambling;
>> -
>> -            intel_hdmi_handle_sink_scrambling(intel_encoder,
>> -                                              conn_state->connector,
>> -                                              clock_ratio, scrambling);
>> -
>> -            /* In HDMI/DVI mode, the port width, and swing/emphasis values
>> -             * are ignored so nothing special needs to be done besides
>> -             * enabling the port.
>> -             */
>> -            I915_WRITE(DDI_BUF_CTL(port),
>> -                       intel_dig_port->saved_port_bits |
>> -                       DDI_BUF_CTL_ENABLE);
>> -    } else if (type == INTEL_OUTPUT_EDP) {
>> -            struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
>> -
>> -            if (port == PORT_A && INTEL_GEN(dev_priv) < 9)
>> -                    intel_dp_stop_link_train(intel_dp);
>> -
>> -            intel_edp_backlight_on(pipe_config, conn_state);
>> -            intel_psr_enable(intel_dp, pipe_config);
>> -            intel_edp_drrs_enable(intel_dp, pipe_config);
>> -    }
>> -
>> -    if (pipe_config->has_audio)
>> -            intel_audio_codec_enable(intel_encoder, pipe_config, 
>> conn_state);
>> +    if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
>> +            intel_enable_ddi_hdmi(encoder, crtc_state, conn_state);
>> +    else
>> +            intel_enable_ddi_dp(encoder, crtc_state, conn_state);
>>  }
>>  
>>  static void intel_disable_ddi_dp(struct intel_encoder *encoder,

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to