On Tue, 24 Oct 2017, SF Markus Elfring <elfr...@users.sourceforge.net> wrote:
> From: Markus Elfring <elfr...@users.sourceforge.net>
> Date: Tue, 24 Oct 2017 15:40:47 +0200
>
> Adjust jump targets so that a specific error code assignment
> will be in the implementation only at the end of this function.

This is not an issue that needs to be "fixed".

>
> This issue was detected by using the Coccinelle software.
>
> Signed-off-by: Markus Elfring <elfr...@users.sourceforge.net>
> ---
>  drivers/gpu/drm/i915/intel_dp.c | 30 ++++++++++++++----------------
>  1 file changed, 14 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 342f1a1fa085..3dd514a77008 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3894,27 +3894,19 @@ static int intel_dp_sink_crc_stop(struct intel_dp 
> *intel_dp)
>       int count = 0;
>       int attempts = 10;
>  
> -     if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0) {
> -             DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n");
> -             ret = -EIO;
> -             goto out;
> -     }
> +     if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0)
> +             goto report_failure;
>  
>       if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK,
> -                            buf & ~DP_TEST_SINK_START) < 0) {
> -             DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n");
> -             ret = -EIO;
> -             goto out;

I'd rather change the debug messages to distinguish the cases. I also
want to keep ret = -EIO in each individual branch, to distinguish from
the cases where it's set to something other than -EIO.

> -     }
> +                            buf & ~DP_TEST_SINK_START) < 0)
> +             goto report_failure;
>  
>       do {
>               intel_wait_for_vblank(dev_priv, intel_crtc->pipe);
> +             if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf)
> +                 < 0)
> +                     goto e_io;
>  
> -             if (drm_dp_dpcd_readb(&intel_dp->aux,
> -                                   DP_TEST_SINK_MISC, &buf) < 0) {
> -                     ret = -EIO;
> -                     goto out;
> -             }

This is good as it is. The change makes it worse.

>               count = buf & DP_TEST_COUNT_MASK;
>       } while (--attempts && count);
>  
> @@ -3923,9 +3915,15 @@ static int intel_dp_sink_crc_stop(struct intel_dp 
> *intel_dp)
>               ret = -ETIMEDOUT;
>       }
>  
> - out:
> +enable_ips:
>       hsw_enable_ips(intel_crtc);
>       return ret;
> +
> +report_failure:
> +     DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n");
> +e_io:
> +     ret = -EIO;
> +     goto enable_ips;

*shudder* Please no.

BR,
Jani.

>  }
>  
>  static int intel_dp_sink_crc_start(struct intel_dp *intel_dp)

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to