On Thu, Nov 02, 2017 at 04:00:49PM -0700, James Ausmus wrote:
> Since GLK, some plane configuration settings have moved to the
> PLANE_COLOR_CTL register. Refactor handling of the register to work like
> PLANE_CTL. This also allows us to fix the set/read of the plane Alpha
> Mode for GLK+.
>
> Signed-off-by: James Ausmus <james.aus...@intel.com>
> Cc: Paulo Zanoni <paulo.r.zan...@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 12 +++++---
> drivers/gpu/drm/i915/intel_display.c | 60
> +++++++++++++++++++++++++++++++++---
> drivers/gpu/drm/i915/intel_drv.h | 5 +++
> drivers/gpu/drm/i915/intel_sprite.c | 14 +++++----
> 4 files changed, 76 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 68a58cce6ab1..520ff9a15222 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6263,7 +6263,7 @@ enum {
> #define _PLANE_CTL_2_A 0x70280
> #define _PLANE_CTL_3_A 0x70380
> #define PLANE_CTL_ENABLE (1 << 31)
> -#define PLANE_CTL_PIPE_GAMMA_ENABLE (1 << 30)
> +#define PLANE_CTL_PIPE_GAMMA_ENABLE (1 << 30) /* Pre-GLK
> */
> #define PLANE_CTL_FORMAT_MASK (0xf << 24)
> #define PLANE_CTL_FORMAT_YUV422 ( 0 << 24)
> #define PLANE_CTL_FORMAT_NV12 ( 1 << 24)
> @@ -6273,7 +6273,7 @@ enum {
> #define PLANE_CTL_FORMAT_AYUV ( 8 << 24)
> #define PLANE_CTL_FORMAT_INDEXED ( 12 << 24)
> #define PLANE_CTL_FORMAT_RGB_565 ( 14 << 24)
> -#define PLANE_CTL_PIPE_CSC_ENABLE (1 << 23)
> +#define PLANE_CTL_PIPE_CSC_ENABLE (1 << 23) /* Pre-GLK */
> #define PLANE_CTL_KEY_ENABLE_MASK (0x3 << 21)
> #define PLANE_CTL_KEY_ENABLE_SOURCE ( 1 << 21)
> #define PLANE_CTL_KEY_ENABLE_DESTINATION ( 2 << 21)
> @@ -6286,13 +6286,13 @@ enum {
> #define PLANE_CTL_YUV422_VYUY ( 3 << 16)
> #define PLANE_CTL_DECOMPRESSION_ENABLE (1 << 15)
> #define PLANE_CTL_TRICKLE_FEED_DISABLE (1 << 14)
> -#define PLANE_CTL_PLANE_GAMMA_DISABLE (1 << 13)
> +#define PLANE_CTL_PLANE_GAMMA_DISABLE (1 << 13) /* Pre-GLK */
> #define PLANE_CTL_TILED_MASK (0x7 << 10)
> #define PLANE_CTL_TILED_LINEAR ( 0 << 10)
> #define PLANE_CTL_TILED_X ( 1 << 10)
> #define PLANE_CTL_TILED_Y ( 4 << 10)
> #define PLANE_CTL_TILED_YF ( 5 << 10)
> -#define PLANE_CTL_ALPHA_MASK (0x3 << 4)
> +#define PLANE_CTL_ALPHA_MASK (0x3 << 4) /* Pre-GLK */
> #define PLANE_CTL_ALPHA_DISABLE ( 0 << 4)
> #define PLANE_CTL_ALPHA_SW_PREMULTIPLY ( 2 << 4)
> #define PLANE_CTL_ALPHA_HW_PREMULTIPLY ( 3 << 4)
> @@ -6332,6 +6332,10 @@ enum {
> #define PLANE_COLOR_PIPE_GAMMA_ENABLE (1 << 30)
> #define PLANE_COLOR_PIPE_CSC_ENABLE (1 << 23)
> #define PLANE_COLOR_PLANE_GAMMA_DISABLE (1 << 13)
> +#define PLANE_COLOR_ALPHA_MASK (0x3 << 4)
> +#define PLANE_COLOR_ALPHA_DISABLE (0 << 4)
> +#define PLANE_COLOR_ALPHA_SW_PREMULTIPLY (2 << 4)
> +#define PLANE_COLOR_ALPHA_HW_PREMULTIPLY (3 << 4)
> #define _PLANE_BUF_CFG_1_A 0x7027c
> #define _PLANE_BUF_CFG_2_A 0x7037c
> #define _PLANE_NV12_BUF_CFG_1_A 0x70278
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index e2ac976844d8..0883e857dda9 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3466,6 +3466,29 @@ static u32 skl_plane_ctl_format(uint32_t pixel_format)
> return 0;
> }
>
> +static u32 glk_plane_ctl_format(uint32_t pixel_format)
> +{
> + /* GLK+ moves the alpha mask to a different register */
> + return skl_plane_ctl_format(pixel_format) & ~PLANE_CTL_ALPHA_MASK;
> +}
> +
> +static u32 glk_plane_color_ctl_alpha(uint32_t pixel_format)
> +{
> + switch (pixel_format) {
> + /*
> + * XXX: For ARBG/ABGR formats we default to expecting scanout buffers
> + * to be already pre-multiplied. We need to add a knob (or a different
> + * DRM_FORMAT) for user-space to configure that.
> + */
Why is this comment getting added to the glk function? It's a generic
issue that affects all platforms with alpha blending.
> + case DRM_FORMAT_ABGR8888:
> + return PLANE_COLOR_ALPHA_SW_PREMULTIPLY;
> + case DRM_FORMAT_ARGB8888:
> + return PLANE_COLOR_ALPHA_SW_PREMULTIPLY;
case A:
case B:
return FOO;
> + default:
> + return PLANE_COLOR_ALPHA_DISABLE;
> + }
> +}
> +
> static u32 skl_plane_ctl_tiling(uint64_t fb_modifier)
> {
> switch (fb_modifier) {
> @@ -3522,14 +3545,16 @@ u32 skl_plane_ctl(const struct intel_crtc_state
> *crtc_state,
>
> plane_ctl = PLANE_CTL_ENABLE;
>
> - if (!IS_GEMINILAKE(dev_priv) && !IS_CANNONLAKE(dev_priv)) {
> + if (!IS_GEMINILAKE(dev_priv) && !(INTEL_GEN(dev_priv) >= 10)) {
Please flip this entire logic around:
if (GEN >= 10 || IS_GLK) {
...
> plane_ctl |=
> PLANE_CTL_PIPE_GAMMA_ENABLE |
> PLANE_CTL_PIPE_CSC_ENABLE |
> PLANE_CTL_PLANE_GAMMA_DISABLE;
> + plane_ctl |= skl_plane_ctl_format(fb->format->format);
> + } else {
> + plane_ctl |= glk_plane_ctl_format(fb->format->format);
> }
>
> - plane_ctl |= skl_plane_ctl_format(fb->format->format);
> plane_ctl |= skl_plane_ctl_tiling(fb->modifier);
> plane_ctl |= skl_plane_ctl_rotation(rotation);
>
> @@ -3541,6 +3566,20 @@ u32 skl_plane_ctl(const struct intel_crtc_state
> *crtc_state,
> return plane_ctl;
> }
>
> +u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
> + const struct intel_plane_state *plane_state)
> +{
> + const struct drm_framebuffer *fb = plane_state->base.fb;
> + u32 plane_color_ctl = 0;
> +
> + plane_color_ctl |= PLANE_COLOR_PIPE_GAMMA_ENABLE;
> + plane_color_ctl |= PLANE_COLOR_PIPE_CSC_ENABLE;
> + plane_color_ctl |= PLANE_COLOR_PLANE_GAMMA_DISABLE;
> + plane_color_ctl |= glk_plane_color_ctl_alpha(fb->format->format);
> +
> + return plane_color_ctl;
> +}
> +
> static int
> __intel_display_resume(struct drm_device *dev,
> struct drm_atomic_state *state,
> @@ -8425,7 +8464,7 @@ skylake_get_initial_plane_config(struct intel_crtc
> *crtc,
> {
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> - u32 val, base, offset, stride_mult, tiling;
> + u32 val, base, offset, stride_mult, tiling, alpha;
> int pipe = crtc->pipe;
> int fourcc, pixel_format;
> unsigned int aligned_height;
> @@ -8447,9 +8486,16 @@ skylake_get_initial_plane_config(struct intel_crtc
> *crtc,
> goto error;
>
> pixel_format = val & PLANE_CTL_FORMAT_MASK;
> +
> + if (!IS_GEMINILAKE(dev_priv) && !(INTEL_GEN(dev_priv) >= 10)) {
ditto
> + alpha = val & PLANE_CTL_ALPHA_MASK;
> + } else {
> + alpha = I915_READ(PLANE_COLOR_CTL(pipe, 0));
> + alpha &= PLANE_COLOR_ALPHA_MASK;
> + }
> +
> fourcc = skl_format_to_fourcc(pixel_format,
> - val & PLANE_CTL_ORDER_RGBX,
> - val & PLANE_CTL_ALPHA_MASK);
> + val & PLANE_CTL_ORDER_RGBX, alpha);
> fb->format = drm_format_info(fourcc);
>
> tiling = val & PLANE_CTL_TILED_MASK;
> @@ -12816,6 +12862,10 @@ intel_check_primary_plane(struct intel_plane *plane,
>
> state->ctl = i9xx_plane_ctl(crtc_state, state);
> }
> + if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10)
I prefer the order to go from new to old. Makes for a more logical
read if we add another branch to the if statement with a more recent
platforms eg.
if (LATEST)
...
else if (SLIGHTLY_OLDER || EVEN_OLDER)
...
> + state->color_ctl = glk_plane_color_ctl(crtc_state, state);
> + else
> + state->color_ctl = 0;
>
> return 0;
> }
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index 47d022d48718..7967b3705217 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -420,6 +420,9 @@ struct intel_plane_state {
> /* plane control register */
> u32 ctl;
>
> + /* plane color control register */
> + u32 color_ctl;
> +
> /*
> * scaler_id
> * = -1 : not using a scaler
> @@ -1492,6 +1495,8 @@ static inline u32 intel_plane_ggtt_offset(const struct
> intel_plane_state *state)
> return i915_ggtt_offset(state->vma);
> }
>
> +u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
> + const struct intel_plane_state *plane_state);
> u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state,
> const struct intel_plane_state *plane_state);
> u32 skl_plane_stride(const struct drm_framebuffer *fb, int plane,
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c
> b/drivers/gpu/drm/i915/intel_sprite.c
> index 4fcf80ca91dd..0c09657101b7 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -240,6 +240,7 @@ skl_update_plane(struct intel_plane *plane,
> enum plane_id plane_id = plane->id;
> enum pipe pipe = plane->pipe;
> u32 plane_ctl = plane_state->ctl;
> + u32 plane_color_ctl = plane_state->color_ctl;
> const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
> u32 surf_addr = plane_state->main.offset;
> unsigned int rotation = plane_state->base.rotation;
> @@ -263,13 +264,9 @@ skl_update_plane(struct intel_plane *plane,
>
> spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
>
> - if (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) {
> + if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10)
ditto
> I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id),
> - PLANE_COLOR_PIPE_GAMMA_ENABLE |
> - PLANE_COLOR_PIPE_CSC_ENABLE |
> - PLANE_COLOR_PLANE_GAMMA_DISABLE);
> - }
> -
> + plane_color_ctl);
> if (key->flags) {
> I915_WRITE_FW(PLANE_KEYVAL(pipe, plane_id), key->min_value);
> I915_WRITE_FW(PLANE_KEYMAX(pipe, plane_id), key->max_value);
> @@ -978,6 +975,11 @@ intel_check_sprite_plane(struct intel_plane *plane,
> state->ctl = g4x_sprite_ctl(crtc_state, state);
> }
>
> + if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10)
ditto
> + state->color_ctl = glk_plane_color_ctl(crtc_state, state);
> + else
> + state->color_ctl = 0;
> +
> return 0;
> }
>
> --
> 2.14.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
