From: Damien Lespiau <damien.lesp...@intel.com>
HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET
register.
v2: Remove a useless level of indentation (Paulo Zanoni)
Signed-off-by: Damien Lespiau <damien.lesp...@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zan...@intel.com> (v1)
---
drivers/gpu/drm/i915/i915_reg.h | 3 +++
drivers/gpu/drm/i915/intel_sprite.c | 8 +++++++-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 1c20df2..9995209 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3223,6 +3223,7 @@
#define _SPRA_SURF 0x7029c
#define _SPRA_KEYMAX 0x702a0
#define _SPRA_TILEOFF 0x702a4
+#define _SPRA_OFFSET 0x702a4
#define _SPRA_SCALE 0x70304
#define SPRITE_SCALE_ENABLE (1<<31)
#define SPRITE_FILTER_MASK (3<<29)
@@ -3243,6 +3244,7 @@
#define _SPRB_SURF 0x7129c
#define _SPRB_KEYMAX 0x712a0
#define _SPRB_TILEOFF 0x712a4
+#define _SPRB_OFFSET 0x712a4
#define _SPRB_SCALE 0x71304
#define _SPRB_GAMC 0x71400
@@ -3256,6 +3258,7 @@
#define SPRSURF(pipe) _PIPE(pipe, _SPRA_SURF, _SPRB_SURF)
#define SPRKEYMAX(pipe) _PIPE(pipe, _SPRA_KEYMAX, _SPRB_KEYMAX)
#define SPRTILEOFF(pipe) _PIPE(pipe, _SPRA_TILEOFF, _SPRB_TILEOFF)
+#define SPROFFSET(pipe) _PIPE(pipe, _SPRA_OFFSET, _SPRB_OFFSET)
#define SPRSCALE(pipe) _PIPE(pipe, _SPRA_SCALE, _SPRB_SCALE)
#define SPRGAMC(pipe) _PIPE(pipe, _SPRA_GAMC, _SPRB_GAMC)
diff --git a/drivers/gpu/drm/i915/intel_sprite.c
b/drivers/gpu/drm/i915/intel_sprite.c
index fa68e2a..1cb8ac2 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -127,7 +127,12 @@ ivb_update_plane(struct drm_plane *plane, struct
drm_framebuffer *fb,
I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
- if (obj->tiling_mode != I915_TILING_NONE) {
+
+ if (IS_HASWELL(dev)) {
+ /* HSW consolidates SPRTILEOFF and SPRLINOFF into a single
+ * SPROFFSET register */
+ I915_WRITE(SPROFFSET(pipe), (y << 16) | x);
+ } else if (obj->tiling_mode != I915_TILING_NONE) {
I915_WRITE(SPRTILEOFF(pipe), (y << 16) | x);
} else {
unsigned long offset;
@@ -135,6 +140,7 @@ ivb_update_plane(struct drm_plane *plane, struct
drm_framebuffer *fb,
offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
I915_WRITE(SPRLINOFF(pipe), offset);
}
+
I915_WRITE(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
if (intel_plane->can_scale)
I915_WRITE(SPRSCALE(pipe), sprscale);
--
1.7.11.7
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
