On Wed, Oct 31, 2012 at 06:12:30PM -0200, Paulo Zanoni wrote:
> From: Paulo Zanoni <paulo.r.zan...@intel.com>
>
> That's what our mode set sequence documentation says we need to do.
>
> Signed-off-by: Paulo Zanoni <paulo.r.zan...@intel.com>
As already bikeshedded on irc, I think the comment is a bit useless.
Instead of "program foo" I think "set foo in bla" and "unset foo in bla"
explains more ...
-Daniel
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index 5d33f62..0239888 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -205,6 +205,12 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
> POSTING_READ(_FDI_RXA_CTL);
> udelay(100);
>
> + /* Program FDI_RX_MISC pwrdn lanes */
> + temp = I915_READ(_FDI_RXA_MISC);
> + temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
> + I915_WRITE(_FDI_RXA_MISC, temp);
> + POSTING_READ(_FDI_RXA_MISC);
> +
> temp = I915_READ(DP_TP_STATUS(PORT_E));
> if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
> DRM_DEBUG_DRIVER("BUF_CTL training done on %d step\n",
> i);
> @@ -227,6 +233,14 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
>
> rx_ctl_val &= ~FDI_RX_PLL_ENABLE;
> I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
> +
> + temp = I915_READ(_FDI_RXA_MISC);
> + temp &= ~(FDI_RX_PWRDN_LANE1_MASK |
> + FDI_RX_PWRDN_LANE0_MASK);
> + temp |= FDI_RX_PWRDN_LANE1_VAL(2) |
> + FDI_RX_PWRDN_LANE0_VAL(2);
> + I915_WRITE(_FDI_RXA_MISC, temp);
> +
> continue;
> }
> }
> --
> 1.7.11.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
