Op 02-04-18 om 11:51 schreef Vidya Srinivas:
> As per display WA 1106, to avoid corruption issues
> NV12 plane height needs to be multiplier of 4
> We expect the src dimensions to be multiplier of 4
> We fail the case where src width or height is not
> multiple of 4 for NV12.
> We also set the scaler destination height
> and width to be multiple of 4. Without this, pipe
> fifo underruns were seen on APL and KBL. We also
> skip src trunction/adjustments for NV12 case and handle
> the sizes directly in skl_update_plane
>
> Credits-to: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> Signed-off-by: Vidya Srinivas <vidya.srini...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_drv.h | 2 ++
> drivers/gpu/drm/i915/intel_sprite.c | 19 ++++++++++++++++---
> 2 files changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index 9c58da0..a1f718d 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -159,6 +159,8 @@
> #define INTEL_I2C_BUS_DVO 1
> #define INTEL_I2C_BUS_SDVO 2
>
> +#define MULT4(x) ((x + 3) & ~0x03)
> +
> /* these are outputs from the chip - integrated only
> external chips are via DVO or SDVO output */
> enum intel_output_type {
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c
> b/drivers/gpu/drm/i915/intel_sprite.c
> index d5dad44..b2292dd 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -255,6 +255,12 @@ skl_update_plane(struct intel_plane *plane,
> uint32_t src_h = drm_rect_height(&plane_state->base.src) >> 16;
> unsigned long irqflags;
>
> + if (fb->format->format == DRM_FORMAT_NV12 &&
> + ((src_h % 4) != 0 || (src_w % 4) != 0)) {
> + DRM_DEBUG_KMS("NV12: src dimensions not valid\n");
> + return;
> + }
Also on a side note, don't add DRM_DEBUG_KMS in update_plane or disable_plane
calls. It can take an arbitrary amount of time, resulting in an atomic update
failure.
> +
> /* Sizes are 0 based */
> src_w--;
> src_h--;
> @@ -292,9 +298,12 @@ skl_update_plane(struct intel_plane *plane,
> PS_SCALER_EN | PS_PLANE_SEL(plane_id) |
> scaler->mode);
> I915_WRITE_FW(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
> I915_WRITE_FW(SKL_PS_WIN_POS(pipe, scaler_id), (crtc_x << 16) |
> crtc_y);
> - I915_WRITE_FW(SKL_PS_WIN_SZ(pipe, scaler_id),
> - ((crtc_w + 1) << 16)|(crtc_h + 1));
> -
> + if (fb->format->format == DRM_FORMAT_NV12)
> + I915_WRITE_FW(SKL_PS_WIN_SZ(pipe, scaler_id),
> + (MULT4(crtc_w) << 16) | MULT4(crtc_h));
> + else
> + I915_WRITE_FW(SKL_PS_WIN_SZ(pipe, scaler_id),
> + ((crtc_w + 1) << 16)|(crtc_h + 1));
> I915_WRITE_FW(PLANE_POS(pipe, plane_id), 0);
> } else {
> I915_WRITE_FW(PLANE_POS(pipe, plane_id), (crtc_y << 16) |
> crtc_x);
> @@ -969,6 +978,9 @@ intel_check_sprite_plane(struct intel_plane *plane,
> return -EINVAL;
> }
>
> + if (fb->format->format == DRM_FORMAT_NV12)
> + goto check_plane_surface;
> +
> /* setup can_scale, min_scale, max_scale */
> if (INTEL_GEN(dev_priv) >= 9) {
> if (state->base.fb)
> @@ -1112,6 +1124,7 @@ intel_check_sprite_plane(struct intel_plane *plane,
> dst->y1 = crtc_y;
> dst->y2 = crtc_y + crtc_h;
>
> +check_plane_surface:
> if (INTEL_GEN(dev_priv) >= 9) {
> ret = skl_check_plane_surface(crtc_state, state);
> if (ret)
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
