On Tue, 2018-04-17 at 20:41 +0300, Ville Syrjälä wrote:
> On Mon, Apr 16, 2018 at 05:43:54PM -0700, Paulo Zanoni wrote:
> > Em Qui, 2018-04-05 às 15:00 -0700, Dhinakaran Pandiyan escreveu:
> > > From: Daniel Vetter <daniel.vet...@ffwll.ch>
> > >
> > > The definitions for the error register should be valid on bdw/skl
> > > too,
> > > but there we haven't even enabled DE_MISC handling yet.
> > >
> > > Somewhat confusing the the moved register offset on bdw is only for
> > > the _CTL/_AUX register, and that _IIR/IMR stayed where they have been
> > > on bdw.
> > >
> > > v2: Fixes from Ville.
> > >
> > > v3: From DK
> > > * Rebased on drm-tip
> > > * Removed BDW IIR bit definition, looks like an unintentional change
> > > that
> > > should be in the following patch.
> > >
> > > v4: From DK
> > > * Don't mask REG_WRITE.
> > >
> > > References: bspec/11974 [SRD Interrupt Bit Definition DevHSW]
> > > Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > > Cc: Rodrigo Vivi <rodrigo.v...@intel.com>
> > > Cc: Daniel Vetter <daniel.vet...@intel.com>
> > > Signed-off-by: Daniel Vetter <daniel.vet...@intel.com>
> > > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandi...@intel.com>
> > > Reviewed-by: Jose Roberto de Souza <jose.so...@intel.com>
> > > ---
> > > drivers/gpu/drm/i915/i915_irq.c | 34
> > > ++++++++++++++++++++++++++++++++++
> > > drivers/gpu/drm/i915/i915_reg.h | 8 ++++++++
> > > 2 files changed, 42 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/i915/i915_irq.c
> > > b/drivers/gpu/drm/i915/i915_irq.c
> > > index 27aee25429b7..c2d3f30778ee 100644
> > > --- a/drivers/gpu/drm/i915/i915_irq.c
> > > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > > @@ -2391,6 +2391,26 @@ static void ilk_display_irq_handler(struct
> > > drm_i915_private *dev_priv,
> > > ironlake_rps_change_irq_handler(dev_priv);
> > > }
> > >
> > > +static void hsw_edp_psr_irq_handler(struct drm_i915_private
> > > *dev_priv)
> > > +{
> > > + u32 edp_psr_iir = I915_READ(EDP_PSR_IIR);
> > > +
> > > + if (edp_psr_iir & EDP_PSR_ERROR)
> > > + DRM_DEBUG_KMS("PSR error\n");
> > > +
> > > + if (edp_psr_iir & EDP_PSR_PRE_ENTRY) {
> > > + DRM_DEBUG_KMS("PSR prepare entry in 2 vblanks\n");
> > > + I915_WRITE(EDP_PSR_IMR, EDP_PSR_PRE_ENTRY);
> >
> > Why are we masking it here? During these 2 vblanks it's possible that
> > something will happen (e.g., frontbuffer writing, cursor moving, page
> > flipping).
>
> The masking was here to avoid seeing a big flood of entry interrupts.
>
> > Are we guaranteed to get a POST_EXIT interrupt even if we
> > give up entering PSR before it is actually entered?
>
> No. The exit interrupt only happens if you actually reached PSR.
>
> >
> >
> > > + }
> > > +
> > > + if (edp_psr_iir & EDP_PSR_POST_EXIT) {
> > > + DRM_DEBUG_KMS("PSR exit completed\n");
> > > + I915_WRITE(EDP_PSR_IMR, 0);
> > > + }
> > > +
> > > + I915_WRITE(EDP_PSR_IIR, edp_psr_iir);
> > > +}
> > > +
> > > static void ivb_display_irq_handler(struct drm_i915_private
> > > *dev_priv,
> > > u32 de_iir)
> > > {
> > > @@ -2403,6 +2423,9 @@ static void ivb_display_irq_handler(struct
> > > drm_i915_private *dev_priv,
> > > if (de_iir & DE_ERR_INT_IVB)
> > > ivb_err_int_handler(dev_priv);
> > >
> > > + if (de_iir & DE_EDP_PSR_INT_HSW)
> > > + hsw_edp_psr_irq_handler(dev_priv);
> > > +
> > > if (de_iir & DE_AUX_CHANNEL_A_IVB)
> > > dp_aux_irq_handler(dev_priv);
> > >
> > > @@ -3260,6 +3283,11 @@ static void ironlake_irq_reset(struct
> > > drm_device *dev)
> > > if (IS_GEN7(dev_priv))
> > > I915_WRITE(GEN7_ERR_INT, 0xffffffff);
> > >
> > > + if (IS_HASWELL(dev_priv)) {
> > > + I915_WRITE(EDP_PSR_IMR, 0xffffffff);
> > > + I915_WRITE(EDP_PSR_IIR, 0xffffffff);
> > > + }
> >
> > We need another IIR write we do for the other platforms. This is not
> > cargo cult (as mentioned in previous review emails), this is required
> > since our hardware is able to store more than one IIR interrupt. Please
> > do it like we do for the other interrupts.
>
My reply and the review were specifically about the POSTING_READ(). I
agree on the second IIR write, but that was not what the original review
comment was about.
I'm still skeptical about inserting the POSTING_READ() between write's
There are at commit messages and emails that indicate the
POSTING_READS() are indeed cargo culted. Let me find more data about
this and get back.
> I don't remember if the PSR IIR is double buffered or not. I would
> assumeme it is. It is super easy to verify though if you want to be
> sure:
> 1. unmask the interrupt
> 2. generate at least two interrupts
> 3. mask the interrupt
> 4. clear IIR
> 5. read IIR
> 6. clear IIR
> 7. read IIR
>
> Step 5 should still show the IIR bit set if the IIR is double buffered.
> And step 7 it should show it to be clear.
>
I'll give it a try, thanks!
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
