On 17/05/2018 18:07, Chris Wilson wrote:
Quoting Tvrtko Ursulin (2018-05-17 14:13:00)
On 17/05/2018 08:40, Chris Wilson wrote:
Back in commit 27af5eea54d1 ("drm/i915: Move execlists irq handler to a
bottom half"), we came to the conclusion that running our CSB processing
and ELSP submission from inside the irq handler was a bad idea. A really
bad idea as we could impose nearly 1s latency on other users of the
system, on average! Deferring our work to a tasklet allowed us to do the
processing with irqs enabled, reducing the impact to an average of about
50us.
We have since eradicated the use of forcewaked mmio from inside the CSB
processing and ELSP submission, bringing the impact down to around 5us
(on Kabylake); an order of magnitude better than our measurements 2
years ago on Broadwell and only about 2x worse on average than the
gem_syslatency on an unladen system.
Comparing the impact on the maximum latency observed over a 120s interval,
repeated several times (using gem_syslatency, similar to RT's cyclictest)
while the system is fully laden with i915 nops, we see that direct
submission definitely worsens the response but not to the same outlandish
degree as before.
x Unladen baseline
+ Using tasklet
* Direct submission
+------------------------------------------------------------------------+
|xx x ++ +++ + * * * ** *** * *|
||A| |__AM__| |_____A_M___| |
+------------------------------------------------------------------------+
What are these headers? This one and below, I cannot decipher them at all.
Ministat histogram. The headers being the label for the charts; it's a
bit flat so hard to tell it's a histogram.
N Min Max Median Avg Stddev
x 10 5 18 10 9.3 3.6530049
+ 10 72 120 108 102.9 15.758243
* 10 255 348 316 305.7 28.74814
In micro-seconds? so tasklet is 108us median? Direct submission 316us
median?
Yup, more runs required so you have prettier graphs and units.
Biggest problem for me is that in these tests it is only showing as
significantly worse than the current tasklet. So it is kind of difficult
the sell the series. :)
If it only solves issues when submitting from a RT task then it is not
so interesting. RT tasks are rare and which deal with 3d/media/ocl
probably even rarer. Or you know of any?
Or perhaps you need to add data from gem_latency as well if that shows
some wins purely on the i915 side?
Regards,
Tvrtko
And with a background load
This is IO background load?
Yes, background writeout.
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx