YUV planes need to be multiples of 2 to scan out. This was
handled correctly for planes other than the primary in the
intel_check_sprite_plane, where the code fixes up the plane
and makes it compliant. Move this code into a location that
allows the primary check to access it as well.
Signed-off-by: Fritz Koenig <frkoe...@google.com>
---
drivers/gpu/drm/i915/intel_display.c | 170 +++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_drv.h | 2 +
drivers/gpu/drm/i915/intel_sprite.c | 154 +-----------------------
3 files changed, 175 insertions(+), 151 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 5f03af455047..e1eb0fb988a6 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12856,6 +12856,170 @@ skl_max_scale(struct intel_crtc *intel_crtc, struct
intel_crtc_state *crtc_state
return max_scale;
}
+int
+intel_clip_src_rect(struct intel_plane *plane,
+ struct intel_crtc_state *crtc_state,
+ struct intel_plane_state *state)
+{
+ struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct drm_framebuffer *fb = state->base.fb;
+ int crtc_x, crtc_y;
+ unsigned int crtc_w, crtc_h;
+ uint32_t src_x, src_y, src_w, src_h;
+ struct drm_rect *src = &state->base.src;
+ struct drm_rect *dst = &state->base.dst;
+ struct drm_rect clip = {};
+ int hscale, vscale;
+ int max_scale, min_scale;
+ bool can_scale;
+
+ *src = drm_plane_state_src(&state->base);
+ *dst = drm_plane_state_dest(&state->base);
+
+ /* setup can_scale, min_scale, max_scale */
+ if (INTEL_GEN(dev_priv) >= 9) {
+ /* use scaler when colorkey is not required */
+ if (!state->ckey.flags) {
+ can_scale = 1;
+ min_scale = 1;
+ max_scale = skl_max_scale(crtc, crtc_state);
+ } else {
+ can_scale = 0;
+ min_scale = DRM_PLANE_HELPER_NO_SCALING;
+ max_scale = DRM_PLANE_HELPER_NO_SCALING;
+ }
+ } else {
+ can_scale = plane->can_scale;
+ max_scale = plane->max_downscale << 16;
+ min_scale = plane->can_scale ? 1 : (1 << 16);
+ }
+
+ /*
+ * FIXME the following code does a bunch of fuzzy adjustments to the
+ * coordinates and sizes. We probably need some way to decide whether
+ * more strict checking should be done instead.
+ */
+ drm_rect_rotate(src, fb->width << 16, fb->height << 16,
+ state->base.rotation);
+
+ hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale);
+ BUG_ON(hscale < 0);
+
+ vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale);
+ BUG_ON(vscale < 0);
+
+ if (crtc_state->base.enable)
+ drm_mode_get_hv_timing(&crtc_state->base.mode,
+ &clip.x2, &clip.y2);
+
+ state->base.visible = drm_rect_clip_scaled(src, dst, &clip, hscale,
vscale);
+
+ crtc_x = dst->x1;
+ crtc_y = dst->y1;
+ crtc_w = drm_rect_width(dst);
+ crtc_h = drm_rect_height(dst);
+
+ if (state->base.visible) {
+ /* check again in case clipping clamped the results */
+ hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
+ if (hscale < 0) {
+ DRM_DEBUG_KMS("Horizontal scaling factor out of
limits\n");
+ drm_rect_debug_print("src: ", src, true);
+ drm_rect_debug_print("dst: ", dst, false);
+
+ return hscale;
+ }
+
+ vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
+ if (vscale < 0) {
+ DRM_DEBUG_KMS("Vertical scaling factor out of
limits\n");
+ drm_rect_debug_print("src: ", src, true);
+ drm_rect_debug_print("dst: ", dst, false);
+
+ return vscale;
+ }
+
+ /* Make the source viewport size an exact multiple of the
scaling factors. */
+ drm_rect_adjust_size(src,
+ drm_rect_width(dst) * hscale -
drm_rect_width(src),
+ drm_rect_height(dst) * vscale -
drm_rect_height(src));
+
+ drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
+ state->base.rotation);
+
+ /* sanity check to make sure the src viewport wasn't enlarged */
+ WARN_ON(src->x1 < (int) state->base.src_x ||
+ src->y1 < (int) state->base.src_y ||
+ src->x2 > (int) state->base.src_x + state->base.src_w ||
+ src->y2 > (int) state->base.src_y + state->base.src_h);
+
+ /*
+ * Hardware doesn't handle subpixel coordinates.
+ * Adjust to (macro)pixel boundary, but be careful not to
+ * increase the source viewport size, because that could
+ * push the downscaling factor out of bounds.
+ */
+ src_x = src->x1 >> 16;
+ src_w = drm_rect_width(src) >> 16;
+ src_y = src->y1 >> 16;
+ src_h = drm_rect_height(src) >> 16;
+
+ if (intel_format_is_yuv(fb->format->format)) {
+ src_x &= ~1;
+ src_w &= ~1;
+
+ /*
+ * Must keep src and dst the
+ * same if we can't scale.
+ */
+ if (!can_scale)
+ crtc_w &= ~1;
+
+ if (crtc_w == 0)
+ state->base.visible = false;
+ }
+ }
+
+ /* Check size restrictions when scaling */
+ if (state->base.visible && (src_w != crtc_w || src_h != crtc_h)) {
+ unsigned int width_bytes;
+ int cpp = fb->format->cpp[0];
+
+ WARN_ON(!can_scale);
+
+ /* FIXME interlacing min height is 6 */
+
+ if (crtc_w < 3 || crtc_h < 3)
+ state->base.visible = false;
+
+ if (src_w < 3 || src_h < 3)
+ state->base.visible = false;
+
+ width_bytes = ((src_x * cpp) & 63) + src_w * cpp;
+
+ if (INTEL_GEN(dev_priv) < 9 && (src_w > 2048 || src_h > 2048 ||
+ width_bytes > 4096 || fb->pitches[0] > 4096)) {
+ DRM_DEBUG_KMS("Source dimensions exceed hardware
limits\n");
+ return -EINVAL;
+ }
+ }
+
+ if (state->base.visible) {
+ src->x1 = src_x << 16;
+ src->x2 = (src_x + src_w) << 16;
+ src->y1 = src_y << 16;
+ src->y2 = (src_y + src_h) << 16;
+ }
+
+ dst->x1 = crtc_x;
+ dst->x2 = crtc_x + crtc_w;
+ dst->y1 = crtc_y;
+ dst->y2 = crtc_y + crtc_h;
+
+ return 0;
+}
+
static int
intel_check_primary_plane(struct intel_plane *plane,
struct intel_crtc_state *crtc_state,
@@ -12887,6 +13051,12 @@ intel_check_primary_plane(struct intel_plane *plane,
if (!state->base.fb)
return 0;
+ if (intel_format_is_yuv(state->base.fb->format->format)) {
+ ret = intel_clip_src_rect(plane, crtc_state, state);
+ if (ret)
+ return ret;
+ }
+
if (INTEL_GEN(dev_priv) >= 9) {
ret = skl_check_plane_surface(crtc_state, state);
if (ret)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index a80fbad9be0f..43847927a927 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1591,6 +1591,8 @@ void intel_mode_from_pipe_config(struct drm_display_mode
*mode,
int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state
*crtc_state);
+int intel_clip_src_rect(struct intel_plane *plane,
+ struct intel_crtc_state *crtc_state, struct
intel_plane_state *state);
static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state
*state)
{
diff --git a/drivers/gpu/drm/i915/intel_sprite.c
b/drivers/gpu/drm/i915/intel_sprite.c
index dbdcf85032df..892d3247ed69 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -935,21 +935,9 @@ intel_check_sprite_plane(struct intel_plane *plane,
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_framebuffer *fb = state->base.fb;
- int crtc_x, crtc_y;
- unsigned int crtc_w, crtc_h;
- uint32_t src_x, src_y, src_w, src_h;
- struct drm_rect *src = &state->base.src;
- struct drm_rect *dst = &state->base.dst;
- struct drm_rect clip = {};
int max_stride = INTEL_GEN(dev_priv) >= 9 ? 32768 : 16384;
- int hscale, vscale;
- int max_scale, min_scale;
- bool can_scale;
int ret;
- *src = drm_plane_state_src(&state->base);
- *dst = drm_plane_state_dest(&state->base);
-
if (!fb) {
state->base.visible = false;
return 0;
@@ -967,145 +955,9 @@ intel_check_sprite_plane(struct intel_plane *plane,
return -EINVAL;
}
- /* setup can_scale, min_scale, max_scale */
- if (INTEL_GEN(dev_priv) >= 9) {
- /* use scaler when colorkey is not required */
- if (!state->ckey.flags) {
- can_scale = 1;
- min_scale = 1;
- max_scale = skl_max_scale(crtc, crtc_state);
- } else {
- can_scale = 0;
- min_scale = DRM_PLANE_HELPER_NO_SCALING;
- max_scale = DRM_PLANE_HELPER_NO_SCALING;
- }
- } else {
- can_scale = plane->can_scale;
- max_scale = plane->max_downscale << 16;
- min_scale = plane->can_scale ? 1 : (1 << 16);
- }
-
- /*
- * FIXME the following code does a bunch of fuzzy adjustments to the
- * coordinates and sizes. We probably need some way to decide whether
- * more strict checking should be done instead.
- */
- drm_rect_rotate(src, fb->width << 16, fb->height << 16,
- state->base.rotation);
-
- hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale);
- BUG_ON(hscale < 0);
-
- vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale);
- BUG_ON(vscale < 0);
-
- if (crtc_state->base.enable)
- drm_mode_get_hv_timing(&crtc_state->base.mode,
- &clip.x2, &clip.y2);
-
- state->base.visible = drm_rect_clip_scaled(src, dst, &clip, hscale,
vscale);
-
- crtc_x = dst->x1;
- crtc_y = dst->y1;
- crtc_w = drm_rect_width(dst);
- crtc_h = drm_rect_height(dst);
-
- if (state->base.visible) {
- /* check again in case clipping clamped the results */
- hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
- if (hscale < 0) {
- DRM_DEBUG_KMS("Horizontal scaling factor out of
limits\n");
- drm_rect_debug_print("src: ", src, true);
- drm_rect_debug_print("dst: ", dst, false);
-
- return hscale;
- }
-
- vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
- if (vscale < 0) {
- DRM_DEBUG_KMS("Vertical scaling factor out of
limits\n");
- drm_rect_debug_print("src: ", src, true);
- drm_rect_debug_print("dst: ", dst, false);
-
- return vscale;
- }
-
- /* Make the source viewport size an exact multiple of the
scaling factors. */
- drm_rect_adjust_size(src,
- drm_rect_width(dst) * hscale -
drm_rect_width(src),
- drm_rect_height(dst) * vscale -
drm_rect_height(src));
-
- drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
- state->base.rotation);
-
- /* sanity check to make sure the src viewport wasn't enlarged */
- WARN_ON(src->x1 < (int) state->base.src_x ||
- src->y1 < (int) state->base.src_y ||
- src->x2 > (int) state->base.src_x + state->base.src_w ||
- src->y2 > (int) state->base.src_y + state->base.src_h);
-
- /*
- * Hardware doesn't handle subpixel coordinates.
- * Adjust to (macro)pixel boundary, but be careful not to
- * increase the source viewport size, because that could
- * push the downscaling factor out of bounds.
- */
- src_x = src->x1 >> 16;
- src_w = drm_rect_width(src) >> 16;
- src_y = src->y1 >> 16;
- src_h = drm_rect_height(src) >> 16;
-
- if (intel_format_is_yuv(fb->format->format)) {
- src_x &= ~1;
- src_w &= ~1;
-
- /*
- * Must keep src and dst the
- * same if we can't scale.
- */
- if (!can_scale)
- crtc_w &= ~1;
-
- if (crtc_w == 0)
- state->base.visible = false;
- }
- }
-
- /* Check size restrictions when scaling */
- if (state->base.visible && (src_w != crtc_w || src_h != crtc_h)) {
- unsigned int width_bytes;
- int cpp = fb->format->cpp[0];
-
- WARN_ON(!can_scale);
-
- /* FIXME interlacing min height is 6 */
-
- if (crtc_w < 3 || crtc_h < 3)
- state->base.visible = false;
-
- if (src_w < 3 || src_h < 3)
- state->base.visible = false;
-
- width_bytes = ((src_x * cpp) & 63) + src_w * cpp;
-
- if (INTEL_GEN(dev_priv) < 9 && (src_w > 2048 || src_h > 2048 ||
- width_bytes > 4096 || fb->pitches[0] > 4096)) {
- DRM_DEBUG_KMS("Source dimensions exceed hardware
limits\n");
- return -EINVAL;
- }
- }
-
- if (state->base.visible) {
- src->x1 = src_x << 16;
- src->x2 = (src_x + src_w) << 16;
- src->y1 = src_y << 16;
- src->y2 = (src_y + src_h) << 16;
- }
-
- dst->x1 = crtc_x;
- dst->x2 = crtc_x + crtc_w;
- dst->y1 = crtc_y;
- dst->y2 = crtc_y + crtc_h;
+ ret = intel_clip_src_rect(plane, crtc_state, state);
+ if (ret)
+ return ret;
if (INTEL_GEN(dev_priv) >= 9) {
ret = skl_check_plane_surface(crtc_state, state);
--
2.17.0.921.gf22659ad46-goog
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
