On Tue, Jun 26, 2018 at 05:55:59PM -0700, Azhar Shaikh wrote:
> On KBL, WHL RVPs, booting up with an external display connected, triggers
> below warning, when the BiOS brings up the external display too.
> This warning is not seen during hotplug.
>
> [ 3.615226] ------------[ cut here ]------------
> [ 3.619829] plane 1A assertion failure (expected on, current off)
> [ 3.632039] WARNING: CPU: 2 PID: 354 at
> drivers/gpu/drm/i915/intel_display.c:1294 assert_plane+0x71/0xbb
> [ 3.633920] iwlwifi 0000:00:14.3: loaded firmware version 38.c0e03d94.0
> op_mode iwlmvm
> [ 3.647157] Modules linked in: iwlwifi cfg80211 btusb btrtl btbcm btintel
> bluetooth ecdh_generic
> [ 3.647163] CPU: 2 PID: 354 Comm: frecon Not tainted
> 4.17.0-rc7-50176-g655af12d39c2 #3
> [ 3.647165] Hardware name: Intel Corporation CoffeeLake Client
> Platform/WhiskeyLake U DDR4 ERB, BIOS CNLSFWR1.R00.X140.B00.1804040304
> 04/04/2018
> [ 3.684509] RIP: 0010:assert_plane+0x71/0xbb
> [ 3.764451] Call Trace:
> [ 3.766888] intel_atomic_commit_tail+0xa97/0xb77
> [ 3.771569] intel_atomic_commit+0x26a/0x279
> [ 3.771572] drm_atomic_helper_set_config+0x5c/0x76
> [ 3.780670] __drm_mode_set_config_internal+0x66/0x109
> [ 3.780672] drm_mode_setcrtc+0x4c9/0x5cc
> [ 3.780674] ? drm_mode_getcrtc+0x162/0x162
> [ 3.789774] ? drm_mode_getcrtc+0x162/0x162
> [ 3.798108] drm_ioctl_kernel+0x8d/0xe4
> [ 3.801926] drm_ioctl+0x27d/0x368
> [ 3.805311] ? drm_mode_getcrtc+0x162/0x162
> [ 3.805314] ? selinux_file_ioctl+0x14e/0x199
> [ 3.805317] vfs_ioctl+0x21/0x2f
> [ 3.813812] do_vfs_ioctl+0x491/0x4b4
> [ 3.813813] ? security_file_ioctl+0x37/0x4b
> [ 3.813816] ksys_ioctl+0x55/0x75
> [ 3.820672] __x64_sys_ioctl+0x1a/0x1e
> [ 3.820674] do_syscall_64+0x51/0x5f
> [ 3.820678] entry_SYSCALL_64_after_hwframe+0x44/0xa9
> [ 3.828221] RIP: 0033:0x7b5e04953967
> [ 3.835504] RSP: 002b:00007fff2eafb6f8 EFLAGS: 00000246 ORIG_RAX:
> 0000000000000010
> [ 3.835505] RAX: ffffffffffffffda RBX: 0000000000000002 RCX:
> 00007b5e04953967
> [ 3.835505] RDX: 00007fff2eafb730 RSI: 00000000c06864a2 RDI:
> 000000000000000f
> [ 3.835506] RBP: 00007fff2eafb720 R08: 0000000000000000 R09:
> 0000000000000000
> [ 3.835507] R10: 0000000000000070 R11: 0000000000000246 R12:
> 000000000000000f
> [ 3.879988] R13: 000056bc9dd7d210 R14: 00007fff2eafb730 R15:
> 00000000c06864a2
> [ 3.887081] Code: 48 c7 c7 06 71 a5 be 84 c0 48 c7 c2 06 fd a3 be 48 89 f9
> 48 0f 44 ca 84 db 48 0f 45 d7 48 c7 c7 df d3 a4 be 31 c0 e8 af a0 c0 ff <0f>
> 0b eb 2b 48 c7 c7 06 fd a3 be 84 c0 48 c7 c2 06 71 a5 be 48
> [ 3.905845] WARNING: CPU: 2 PID: 354 at
> drivers/gpu/drm/i915/intel_display.c:1294 assert_plane+0x71/0xbb
> [ 3.920964] ---[ end trace dac692f4ac46391a ]---
>
> The warning is seen when mode_setcrtc() is called for pipeB
> during bootup and before we get a mode_setcrtc() for pipeA,
> while doing update_crtcs() in intel_atomic_commit_tail().
> Now since, plane1A is still active after commit, update_crtcs()
> is done for pipeA and eventually update_plane() for plane1A.
>
> intel_plane_state->ctl for plane1A is not updated since set_modecrtc() is
> called for pipeB. So intel_plane_state->ctl for plane 1A will be 0x0.
> So doing an update_plane() for plane1A, will result in clearing
> PLANE_CTL_ENABLE bit, and hence the warning.
>
> To fix this warning, force all active planes to recompute their states
> in probe.
>
> Signed-off-by: Azhar Shaikh <azhar.sha...@intel.com>
> ---
> Changes in v4:
> - Handle locking in intel_initial_commit()
> - Move the for loop inside intel_initial_commit() so that
> drm_atomic_commit() is called only once
> - Call intel_initial_commit() only for more than one active crtc on boot.
> - Save the return value of intel_initial_commit() and print a message in
> case of an error
>
> Changes in v3:
> - Add comments
>
> Changes in v2:
> - Force all planes to recompute their states.(Ville Syrjälä)
> - Update the commit message
Include the changelog in the commit message above Signed-off-by
>
> drivers/gpu/drm/i915/intel_display.c | 81
> +++++++++++++++++++++++++++++++++++-
> 1 file changed, 79 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 3709fa1b6318..40bdb28aa2a5 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -15092,12 +15092,76 @@ static void intel_update_fdi_pll_freq(struct
> drm_i915_private *dev_priv)
> DRM_DEBUG_DRIVER("FDI PLL freq=%d\n", dev_priv->fdi_pll_freq);
> }
>
> +static int intel_initial_commit(struct drm_device *dev)
> +{
> + struct drm_atomic_state *state = NULL;
> + struct drm_modeset_acquire_ctx ctx;
> + struct drm_crtc_state *crtc_state;
> + struct intel_crtc *intel_crtc;
> + int ret = 0;
> +
> + drm_modeset_acquire_init(&ctx, 0);
> +
> +retry:
> + state = drm_atomic_state_alloc(dev);
> + if (!state)
> + goto unlock;
Locks are not acquired. It should not call unlock. Use another goto to call
drm_modeset_acquire_fini
> +
> + state->acquire_ctx = &ctx;
> +
> + ret = drm_modeset_lock_all_ctx(dev, &ctx);
> + if (ret == -EDEADLK) {
> + drm_atomic_state_clear(state);
> + drm_modeset_backoff(&ctx);
> + goto retry;
> + } else if (WARN_ON(ret)) {
> + goto unlock;
Same as above. Also call drm_atomic_state_put to free the allocated state.
> + }
> +
> + for_each_intel_crtc(dev, intel_crtc) {
> + struct drm_crtc *crtc = &intel_crtc->base;
> +
> + crtc_state = drm_atomic_get_crtc_state(state, crtc);
> + if (IS_ERR(crtc_state)) {
> + ret = PTR_ERR(crtc_state);
> + goto out;
> + }
> +
> + if (crtc_state->active) {
> + ret = drm_atomic_add_affected_planes(state, crtc);
> + if (ret)
> + goto out;
> + }
> + }
> +
> + ret = drm_atomic_commit(state);
> + if (ret == -EDEADLK) {
> + drm_atomic_state_clear(state);
> + drm_modeset_backoff(&ctx);
> + goto retry;
> + }
> +
> +out:
> + if (state) {
> + drm_atomic_state_put(state);
> + state = NULL;
> + }
> +
> +unlock:
> + drm_modeset_drop_locks(&ctx);
> + drm_modeset_acquire_fini(&ctx);
Re-order freeing the objects in this case drm_modeset_drop_locks followed by
drm_atomic_state_put and drm_modeset_acquire_fini
Regards,
Radhakrishna(RK) Sripada
> +
> + return ret;
> +}
> +
> int intel_modeset_init(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = to_i915(dev);
> struct i915_ggtt *ggtt = &dev_priv->ggtt;
> enum pipe pipe;
> struct intel_crtc *crtc;
> + u16 num_active_crtcs;
> + int ret;
>
> dev_priv->modeset_wq = alloc_ordered_workqueue("i915_modeset", 0);
>
> @@ -15172,8 +15236,6 @@ int intel_modeset_init(struct drm_device *dev)
> INTEL_INFO(dev_priv)->num_pipes > 1 ? "s" : "");
>
> for_each_pipe(dev_priv, pipe) {
> - int ret;
> -
> ret = intel_crtc_init(dev_priv, pipe);
> if (ret) {
> drm_mode_config_cleanup(dev);
> @@ -15203,6 +15265,8 @@ int intel_modeset_init(struct drm_device *dev)
>
> if (!crtc->active)
> continue;
> + else
> + num_active_crtcs++;
>
> /*
> * Note that reserving the BIOS fb up front prevents us
> @@ -15222,6 +15286,19 @@ int intel_modeset_init(struct drm_device *dev)
> }
>
> /*
> + * Only in case of more than one active crtc in probe, force
> + * all active planes to recompute their states. So that on
> + * mode_setcrtc after probe, all the intel_plane_state variables
> + * are already calculated and there is no assert_plane warnings
> + * during bootup.
> + */
> + if (num_active_crtcs > 1) {
> + ret = intel_initial_commit(dev);
> + if (ret)
> + DRM_DEBUG_KMS("Initial commit in probe failed.\n");
> + }
> +
> + /*
> * Make sure hardware watermarks really match the state we read out.
> * Note that we need to do this after reconstructing the BIOS fb's
> * since the watermark calculation done here will use pstate->fb.
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
