On 2018-07-31 05:07 PM, Manasi Navare wrote:
> From: Gaurav K Singh <gaurav.k.si...@intel.com>
>
> This defines all the DSC parameters as per the VESA DSC spec
> that will be required for DSC encoder/decoder
>
> v4 (From Manasi)
> * Add the DSC_MUX_WORD_SIZE constants (Manasi)
>
> v3 (From Manasi)
> * Remove the duplicate define (Suggested By:Harry Wentland)
>
> v2: Define this struct in DRM (From Manasi)
> * Changed the data types to u8/u16 instead of unsigned longs (Manasi)
> * Remove driver specific fields (Manasi)
> * Move this struct definition to DRM (Manasi)
> * Define DSC 1.2 parameters (Manasi)
> * Use DSC_NUM_BUF_RANGES (Manasi)
> * Call it drm_dsc_config (Manasi)
>
> Cc: dri-de...@lists.freedesktop.org
> Cc: Jani Nikula <jani.nik...@linux.intel.com>
> Cc: Ville Syrjala <ville.syrj...@linux.intel.com>
> Cc: Anusha Srivatsa <anusha.sriva...@intel.com>
> Cc: Harry Wentland <harry.wentl...@amd.com>
> Signed-off-by: Manasi Navare <manasi.d.nav...@intel.com>
> Signed-off-by: Gaurav K Singh <gaurav.k.si...@intel.com>
Acked-by: Harry Wentland <harry.wentl...@amd.com>
Harry
> ---
> include/drm/drm_dsc.h | 110
> ++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 110 insertions(+)
>
> diff --git a/include/drm/drm_dsc.h b/include/drm/drm_dsc.h
> index 678e8e6..eda323d 100644
> --- a/include/drm/drm_dsc.h
> +++ b/include/drm/drm_dsc.h
> @@ -30,6 +30,116 @@
>
> /* VESA Display Stream Compression DSC 1.2 constants */
> #define DSC_NUM_BUF_RANGES 15
> +#define DSC_MUX_WORD_SIZE_8_10_BPC 48
> +#define DSC_MUX_WORD_SIZE_12_BPC 64
> +
> +/* Configuration for a single Rate Control model range */
> +struct dsc_rc_range_parameters {
> + /* Min Quantization Parameters allowed for this range */
> + u8 range_min_qp;
> + /* Max Quantization Parameters allowed for this range */
> + u8 range_max_qp;
> + /* Bits/group offset to apply to target for this group */
> + u8 range_bpg_offset;
> +};
> +
> +struct drm_dsc_config {
> + /* Bits / component for previous reconstructed line buffer */
> + u8 line_buf_depth;
> + /* Bits per component to code (must be 8, 10, or 12) */
> + u8 bits_per_component;
> + /*
> + * Flag indicating to do RGB - YCoCg conversion
> + * and back (should be 1 for RGB input)
> + */
> + bool convert_rgb;
> + u8 slice_count;
> + /* Slice Width */
> + u16 slice_width;
> + /* Slice Height */
> + u16 slice_height;
> + /*
> + * 4:2:2 enable mode (from PPS, 4:2:2 conversion happens
> + * outside of DSC encode/decode algorithm)
> + */
> + bool enable422;
> + /* Picture Width */
> + u16 pic_width;
> + /* Picture Height */
> + u16 pic_height;
> + /* Offset to bits/group used by RC to determine QP adjustment */
> + u8 rc_tgt_offset_high;
> + /* Offset to bits/group used by RC to determine QP adjustment */
> + u8 rc_tgt_offset_low;
> + /* Bits/pixel target << 4 (ie., 4 fractional bits) */
> + u16 bits_per_pixel;
> + /*
> + * Factor to determine if an edge is present based
> + * on the bits produced
> + */
> + u8 rc_edge_factor;
> + /* Slow down incrementing once the range reaches this value */
> + u8 rc_quant_incr_limit1;
> + /* Slow down incrementing once the range reaches this value */
> + u8 rc_quant_incr_limit0;
> + /* Number of pixels to delay the initial transmission */
> + u16 initial_xmit_delay;
> + /* Number of pixels to delay the VLD on the decoder,not including SSM */
> + u16 initial_dec_delay;
> + /* Block prediction enable */
> + bool block_pred_enable;
> + /* Bits/group offset to use for first line of the slice */
> + u8 first_line_bpg_offset;
> + /* Value to use for RC model offset at slice start */
> + u16 initial_offset;
> + /* Thresholds defining each of the buffer ranges */
> + u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
> + /* Parameters for each of the RC ranges */
> + struct dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES];
> + /* Total size of RC model */
> + u16 rc_model_size;
> + /* Minimum QP where flatness information is sent */
> + u8 flatness_min_qp;
> + /* Maximum QP where flatness information is sent */
> + u8 flatness_max_qp;
> + /* Initial value for scale factor */
> + u8 initial_scale_value;
> + /* Decrement scale factor every scale_decrement_interval groups */
> + u16 scale_decrement_interval;
> + /* Increment scale factor every scale_increment_interval groups */
> + u16 scale_increment_interval;
> + /* Non-first line BPG offset to use */
> + u16 nfl_bpg_offset;
> + /* BPG offset used to enforce slice bit */
> + u16 slice_bpg_offset;
> + /* Final RC linear transformation offset value */
> + u16 final_offset;
> + /* Enable on-off VBR (ie., disable stuffing bits) */
> + bool vbr_enable;
> + /* Mux word size (in bits) for SSM mode */
> + u8 mux_word_size;
> + /*
> + * The (max) size in bytes of the "chunks" that are
> + * used in slice multiplexing
> + */
> + u16 slice_chunk_size;
> + /* Rate Control buffer siz in bits */
> + u16 rc_bits;
> + /* DSC Minor Version */
> + u8 dsc_version_minor;
> + /* DSC Major version */
> + u8 dsc_version_major;
> + /* Native 4:2:2 support */
> + bool native_422;
> + /* Native 4:2:0 support */
> + bool native_420;
> + /* Additional bits/grp for seconnd line of slice for native 4:2:0 */
> + u8 second_line_bpg_offset;
> + /* Num of bits deallocated for each grp that is not in second line of
> slice */
> + u16 nsl_bpg_offset;
> + /* Offset adj fr second line in Native 4:2:0 mode */
> + u16 second_line_offset_adj;
> +};
>
> /**
> * struct picture_parameter_set - Represents 128 bytes of Picture Parameter
> Set
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
