On Sat, 25 Aug 2018, Lyude Paul <ly...@redhat.com> wrote:
> From: Jan-Marek Glogowski <glo...@fbihome.de>
>
> This re-applies the workaround for "some DP sinks, [which] are a
> little nuts" from commit 1a36147bb939 ("drm/i915: Perform link
> quality check unconditionally during long pulse").
> It makes the secondary AOC E2460P monitor connected via DP to an
> acer Veriton N4640G usable again.
>
> This hunk was dropped in commit c85d200e8321 ("drm/i915: Move SST
> DP link retraining into the ->post_hotplug() hook")
>
> Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the 
> ->post_hotplug() hook")
> [Cleaned up commit message, added stable cc]
> Signed-off-by: Lyude Paul <ly...@redhat.com>
> Signed-off-by: Jan-Marek Glogowski <glo...@fbihome.de>
> Cc: sta...@vger.kernel.org
> ---
> Resending this to update patchwork; will push in a little bit

Is there a bugzilla? Reference to a list discussion? Something with a
dmesg where someone can actually verify this is the right fix?

IMO needs an ack from Ville too. He should be in Cc: in the first place
as the author of the regressing commit.

'dim fixes c85d200e8321' gives you the output:

Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the 
->post_hotplug() hook")
Cc: Manasi Navare <manasi.d.nav...@intel.com>
Cc: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
Cc: Lyude Paul <ly...@redhat.com>
Cc: Jani Nikula <jani.nik...@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahti...@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.v...@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <sta...@vger.kernel.org> # v4.17+

BR,
Jani.

>
>  drivers/gpu/drm/i915/intel_dp.c | 33 +++++++++++++++++++--------------
>  1 file changed, 19 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index b3f6f04c3c7d..db8515171270 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -4333,18 +4333,6 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp)
>       return !drm_dp_channel_eq_ok(link_status, intel_dp->lane_count);
>  }
>  
> -/*
> - * If display is now connected check links status,
> - * there has been known issues of link loss triggering
> - * long pulse.
> - *
> - * Some sinks (eg. ASUS PB287Q) seem to perform some
> - * weird HPD ping pong during modesets. So we can apparently
> - * end up with HPD going low during a modeset, and then
> - * going back up soon after. And once that happens we must
> - * retrain the link to get a picture. That's in case no
> - * userspace component reacted to intermittent HPD dip.
> - */
>  int intel_dp_retrain_link(struct intel_encoder *encoder,
>                         struct drm_modeset_acquire_ctx *ctx)
>  {
> @@ -5031,7 +5019,8 @@ intel_dp_unset_edid(struct intel_dp *intel_dp)
>  }
>  
>  static int
> -intel_dp_long_pulse(struct intel_connector *connector)
> +intel_dp_long_pulse(struct intel_connector *connector,
> +                 struct drm_modeset_acquire_ctx *ctx)
>  {
>       struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
>       struct intel_dp *intel_dp = intel_attached_dp(&connector->base);
> @@ -5090,6 +5079,22 @@ intel_dp_long_pulse(struct intel_connector *connector)
>                */
>               status = connector_status_disconnected;
>               goto out;
> +     } else {
> +             /*
> +              * If display is now connected check links status,
> +              * there has been known issues of link loss triggering
> +              * long pulse.
> +              *
> +              * Some sinks (eg. ASUS PB287Q) seem to perform some
> +              * weird HPD ping pong during modesets. So we can apparently
> +              * end up with HPD going low during a modeset, and then
> +              * going back up soon after. And once that happens we must
> +              * retrain the link to get a picture. That's in case no
> +              * userspace component reacted to intermittent HPD dip.
> +              */
> +             struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
> +
> +             intel_dp_retrain_link(encoder, ctx);
>       }
>  
>       /*
> @@ -5151,7 +5156,7 @@ intel_dp_detect(struct drm_connector *connector,
>                               return ret;
>               }
>  
> -             status = intel_dp_long_pulse(intel_dp->attached_connector);
> +             status = intel_dp_long_pulse(intel_dp->attached_connector, ctx);
>       }
>  
>       intel_dp->detect_done = false;

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to