On Tue, Aug 14, 2018 at 03:23:20PM +0530, Shashank Sharma wrote:
> Currently, we are using a bool in CRTC state (state->ycbcr420),
> to indicate modeset, that the output format is YCBCR 4:2:0. Now in
> order to support other YCBCR formats, we will need more such flags.
>
> This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the
> CRTC output formats and then plugs it during the modeset.
>
> V3: Added this patch in the series, to address review comments from
> second patchset.
> V4: Added r-b from Maarten (on v3)
> Addressed review comments from Ville:
> - Change the enum name to intel_output_format.
> - Start the enum value (INVALID) from 0 instaed of 1.
> - Set the crtc's output_format to RGB in encoder's compute_config.
> V5: Broke previous patch 1 into two parts,
> - first patch to add CRTC output format in general
> - second patch (this one) to add YCBCR 4:2:0 output
> format specifically.
> - Use ARRAY_SIZE(format_str) for output format validity check (Ville)
> V6: Added a separate function to calculate crtc_state->output_format, and
> calling it from various get_config function (Fix CI build warning)
> V7: Fixed checkpatch warnings for alignment
> V8: Rebase
> V9: Rebase
> V10: Rebase
>
> Cc: Ville Syrjala <ville.syrj...@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> Signed-off-by: Shashank Sharma <shashank.sha...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_color.c | 2 +-
> drivers/gpu/drm/i915/intel_ddi.c | 2 +-
> drivers/gpu/drm/i915/intel_display.c | 72
> +++++++++++++++++++++---------------
> drivers/gpu/drm/i915/intel_drv.h | 4 +-
> drivers/gpu/drm/i915/intel_hdmi.c | 6 +--
> drivers/gpu/drm/i915/intel_panel.c | 2 +-
> 6 files changed, 50 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_color.c
> b/drivers/gpu/drm/i915/intel_color.c
> index c6a7bea..bf9d8f6 100644
> --- a/drivers/gpu/drm/i915/intel_color.c
> +++ b/drivers/gpu/drm/i915/intel_color.c
> @@ -149,7 +149,7 @@ static void ilk_load_csc_matrix(struct drm_crtc_state
> *crtc_state)
> if (INTEL_GEN(dev_priv) >= 8 || IS_HASWELL(dev_priv))
> limited_color_range = intel_crtc_state->limited_color_range;
>
> - if (intel_crtc_state->ycbcr420) {
> + if (intel_crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
> ilk_load_ycbcr_conversion_matrix(intel_crtc);
> return;
> } else if (crtc_state->ctm) {
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index 0adc043..a036fe6 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1442,7 +1442,7 @@ static void ddi_dotclock_get(struct intel_crtc_state
> *pipe_config)
> else
> dotclock = pipe_config->port_clock;
>
> - if (pipe_config->ycbcr420)
> + if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
> dotclock *= 2;
>
> if (pipe_config->pixel_multiplier)
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 5e5bc06..e2a1e4f 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4811,7 +4811,8 @@ skl_update_scaler(struct intel_crtc_state *crtc_state,
> bool force_detach,
> if (pixel_format == DRM_FORMAT_NV12)
> need_scaling = true;
>
> - if (crtc_state->ycbcr420 && scaler_user == SKL_CRTC_INDEX)
> + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 &&
> + scaler_user == SKL_CRTC_INDEX)
> need_scaling = true;
>
> /*
> @@ -6620,7 +6621,8 @@ static int intel_crtc_compute_config(struct intel_crtc
> *crtc,
> return -EINVAL;
> }
>
> - if (pipe_config->ycbcr420 && pipe_config->base.ctm) {
> + if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 &&
> + pipe_config->base.ctm) {
> /*
> * There is only one pipe CSC unit per pipe, and we need that
> * for output conversion from RGB->YCBCR. So if CTM is already
> @@ -7818,6 +7820,35 @@ static void chv_crtc_clock_get(struct intel_crtc *crtc,
> pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
> }
>
> +static void intel_get_crtc_ycbcr_config(struct intel_crtc *crtc,
> + struct intel_crtc_state *pipe_config)
> +{
> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> + enum intel_output_format output = INTEL_OUTPUT_FORMAT_RGB;
> +
> + if (IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9) {
> + u32 tmp = I915_READ(PIPEMISC(crtc->pipe));
> +
> + if (tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV) {
> + bool ycbcr420_enabled = tmp & PIPEMISC_YUV420_ENABLE;
> + bool blend = tmp & PIPEMISC_YUV420_MODE_FULL_BLEND;
> +
> + if (ycbcr420_enabled) {
> + /* We support 4:2:0 in full blend mode only */
> + if (!blend)
> + output = INTEL_OUTPUT_FORMAT_INVALID;
> + else if (!(IS_GEMINILAKE(dev_priv) ||
> + INTEL_GEN(dev_priv) >= 10))
> + output = INTEL_OUTPUT_FORMAT_INVALID;
> + else
> + output = INTEL_OUTPUT_FORMAT_YCBCR420;
> + }
> + }
> + }
> +
> + pipe_config->output_format = output;
> +}
> +
> static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
> struct intel_crtc_state *pipe_config)
> {
> @@ -7865,6 +7896,7 @@ static bool i9xx_get_pipe_config(struct intel_crtc
> *crtc,
>
> intel_get_pipe_timings(crtc, pipe_config);
> intel_get_pipe_src_size(crtc, pipe_config);
> + intel_get_crtc_ycbcr_config(crtc, pipe_config);
That function is bdw+ only actually, so not much point in calling it
here. Just need the patch 1 to be fixed to correcly set output_type=RGB.
We'll need to come up with another way to detect the output_format when
we start to do yuv output on pre-bdw.
>
> i9xx_get_pfit_config(crtc, pipe_config);
>
> @@ -8452,10 +8484,10 @@ static void haswell_set_pipemisc(struct drm_crtc
> *crtc)
> if (intel_crtc->config->dither)
> val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
>
> - if (config->ycbcr420) {
> - val |= PIPEMISC_OUTPUT_COLORSPACE_YUV |
> - PIPEMISC_YUV420_ENABLE |
> - PIPEMISC_YUV420_MODE_FULL_BLEND;
> + if (config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
> + val |= PIPEMISC_OUTPUT_COLORSPACE_YUV;
> + val |= PIPEMISC_YUV420_ENABLE |
> + PIPEMISC_YUV420_MODE_FULL_BLEND;
> }
>
> I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
> @@ -8953,6 +8985,7 @@ static bool ironlake_get_pipe_config(struct intel_crtc
> *crtc,
>
> intel_get_pipe_timings(crtc, pipe_config);
> intel_get_pipe_src_size(crtc, pipe_config);
> + intel_get_crtc_ycbcr_config(crtc, pipe_config);
ditto
>
> ironlake_get_pfit_config(crtc, pipe_config);
>
> @@ -9514,28 +9547,11 @@ static bool haswell_get_pipe_config(struct intel_crtc
> *crtc,
> }
>
> intel_get_pipe_src_size(crtc, pipe_config);
> + intel_get_crtc_ycbcr_config(crtc, pipe_config);
>
> pipe_config->gamma_mode =
> I915_READ(GAMMA_MODE(crtc->pipe)) & GAMMA_MODE_MODE_MASK;
>
> - if (IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9) {
> - u32 tmp = I915_READ(PIPEMISC(crtc->pipe));
> - bool clrspace_yuv = tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV;
> -
> - if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
> - bool blend_mode_420 = tmp &
> - PIPEMISC_YUV420_MODE_FULL_BLEND;
> -
> - pipe_config->ycbcr420 = tmp & PIPEMISC_YUV420_ENABLE;
> - if (pipe_config->ycbcr420 != clrspace_yuv ||
> - pipe_config->ycbcr420 != blend_mode_420)
> - DRM_DEBUG_KMS("Bad 4:2:0 mode (%08x)\n", tmp);
> - } else if (clrspace_yuv) {
> - DRM_DEBUG_KMS("YCbCr 4:2:0 Unsupported\n");
> - }
> - }
> -
> - pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
> power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
> if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
> power_domain_mask |= BIT_ULL(power_domain);
> @@ -10886,11 +10902,13 @@ static void snprintf_output_types(char *buf, size_t
> len,
> static const char * const output_format_str[] = {
> [INTEL_OUTPUT_FORMAT_INVALID] = "Invalid",
> [INTEL_OUTPUT_FORMAT_RGB] = "RGB",
> + [INTEL_OUTPUT_FORMAT_YCBCR420] = "YCBCR4:2:0",
> };
>
> static const char *output_formats(enum intel_output_format format)
> {
> - if (format != INTEL_OUTPUT_FORMAT_RGB)
> + if (format < INTEL_OUTPUT_FORMAT_RGB ||
I think the enum ends up unsigned so this < check is pointless.
> + format > ARRAY_SIZE(output_format_str))
This should be >=
With this fixed
Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> format = INTEL_OUTPUT_FORMAT_INVALID;
> return output_format_str[format];
> }
> @@ -10926,9 +10944,6 @@ static void intel_dump_pipe_config(struct intel_crtc
> *crtc,
> pipe_config->fdi_lanes,
> &pipe_config->fdi_m_n);
>
> - if (pipe_config->ycbcr420)
> - DRM_DEBUG_KMS("YCbCr 4:2:0 output enabled\n");
> -
> if (intel_crtc_has_dp_encoder(pipe_config)) {
> intel_dump_m_n_config(pipe_config, "dp m_n",
> pipe_config->lane_count, &pipe_config->dp_m_n);
> @@ -11515,7 +11530,6 @@ intel_pipe_config_compare(struct drm_i915_private
> *dev_priv,
> PIPE_CONF_CHECK_BOOL(hdmi_scrambling);
> PIPE_CONF_CHECK_BOOL(hdmi_high_tmds_clock_ratio);
> PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_infoframe);
> - PIPE_CONF_CHECK_BOOL(ycbcr420);
>
> PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_audio);
>
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index f704720..cc7a46e 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -711,6 +711,7 @@ struct intel_crtc_wm_state {
> enum intel_output_format {
> INTEL_OUTPUT_FORMAT_INVALID,
> INTEL_OUTPUT_FORMAT_RGB,
> + INTEL_OUTPUT_FORMAT_YCBCR420,
> };
>
> struct intel_crtc_state {
> @@ -900,9 +901,6 @@ struct intel_crtc_state {
> /* HDMI High TMDS char rate ratio */
> bool hdmi_high_tmds_clock_ratio;
>
> - /* output format is YCBCR 4:2:0 */
> - bool ycbcr420;
> -
> /* Output format RGB/YCBCR etc */
> enum intel_output_format output_format;
> };
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
> b/drivers/gpu/drm/i915/intel_hdmi.c
> index 8993e66..f1259a9 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -486,7 +486,7 @@ static void intel_hdmi_set_avi_infoframe(struct
> drm_encoder *encoder,
> return;
> }
>
> - if (crtc_state->ycbcr420)
> + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
> frame.avi.colorspace = HDMI_COLORSPACE_YUV420;
> else
> frame.avi.colorspace = HDMI_COLORSPACE_RGB;
> @@ -1620,7 +1620,7 @@ static bool hdmi_deep_color_possible(const struct
> intel_crtc_state *crtc_state,
> if (connector_state->crtc != crtc_state->base.crtc)
> continue;
>
> - if (crtc_state->ycbcr420) {
> + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
> const struct drm_hdmi_info *hdmi = &info->hdmi;
>
> if (bpc == 12 && !(hdmi->y420_dc_modes &
> @@ -1665,7 +1665,7 @@ intel_hdmi_ycbcr420_config(struct drm_connector
> *connector,
> *clock_12bpc /= 2;
> *clock_10bpc /= 2;
> *clock_8bpc /= 2;
> - config->ycbcr420 = true;
> + config->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
>
> /* YCBCR 420 output conversion needs a scaler */
> if (skl_update_scaler_crtc(config)) {
> diff --git a/drivers/gpu/drm/i915/intel_panel.c
> b/drivers/gpu/drm/i915/intel_panel.c
> index 4a9f139..5cca04a 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -111,7 +111,7 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
> /* Native modes don't need fitting */
> if (adjusted_mode->crtc_hdisplay == pipe_config->pipe_src_w &&
> adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h &&
> - !pipe_config->ycbcr420)
> + pipe_config->output_format != INTEL_OUTPUT_FORMAT_YCBCR420)
> goto done;
>
> switch (fitting_mode) {
> --
> 2.7.4
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
