Instead of passing crtc and dereferencing crtc->config,
passs the correct crtc_state and obtain the crtc pointer from there.
Changes since v1:
- Move vlv/chv changes and i9xx_set_pll_dividers changes
from crtc_enable/disable patches to here.
- Add commit message.
Signed-off-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 37 ++++++++++++++--------------
1 file changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index bc1238628138..e6f8dbb17dd2 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1565,14 +1565,15 @@ static void i9xx_enable_pll(struct intel_crtc *crtc,
}
}
-static void i9xx_disable_pll(struct intel_crtc *crtc)
+static void i9xx_disable_pll(const struct intel_crtc_state *crtc_state)
{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum pipe pipe = crtc->pipe;
/* Disable DVO 2x clock on both PLLs if necessary */
if (IS_I830(dev_priv) &&
- intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DVO) &&
+ intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO) &&
!intel_num_dvo_pipes(dev_priv)) {
I915_WRITE(DPLL(PIPE_B),
I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
@@ -4323,10 +4324,10 @@ static void ivb_manual_fdi_link_train(struct intel_crtc
*crtc,
DRM_DEBUG_KMS("FDI train done.\n");
}
-static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
+static void ironlake_fdi_pll_enable(const struct intel_crtc_state *crtc_state)
{
- struct drm_device *dev = intel_crtc->base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
int pipe = intel_crtc->pipe;
i915_reg_t reg;
u32 temp;
@@ -4335,7 +4336,7 @@ static void ironlake_fdi_pll_enable(struct intel_crtc
*intel_crtc)
reg = FDI_RX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
- temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
+ temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
@@ -5614,7 +5615,7 @@ static void ironlake_crtc_enable(struct intel_crtc_state
*pipe_config,
/* Note: FDI PLL enabling _must_ be done before we enable the
* cpu pipes, hence this is separate from all the other fdi/pch
* enabling. */
- ironlake_fdi_pll_enable(intel_crtc);
+ ironlake_fdi_pll_enable(pipe_config);
} else {
assert_fdi_tx_disabled(dev_priv, pipe);
assert_fdi_rx_disabled(dev_priv, pipe);
@@ -6081,11 +6082,11 @@ static void valleyview_crtc_enable(struct
intel_crtc_state *pipe_config,
intel_encoders_pre_pll_enable(crtc, pipe_config, old_state);
if (IS_CHERRYVIEW(dev_priv)) {
- chv_prepare_pll(intel_crtc, intel_crtc->config);
- chv_enable_pll(intel_crtc, intel_crtc->config);
+ chv_prepare_pll(intel_crtc, pipe_config);
+ chv_enable_pll(intel_crtc, pipe_config);
} else {
- vlv_prepare_pll(intel_crtc, intel_crtc->config);
- vlv_enable_pll(intel_crtc, intel_crtc->config);
+ vlv_prepare_pll(intel_crtc, pipe_config);
+ vlv_enable_pll(intel_crtc, pipe_config);
}
intel_encoders_pre_enable(crtc, pipe_config, old_state);
@@ -6104,13 +6105,13 @@ static void valleyview_crtc_enable(struct
intel_crtc_state *pipe_config,
intel_encoders_enable(crtc, pipe_config, old_state);
}
-static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
+static void i9xx_set_pll_dividers(const struct intel_crtc_state *crtc_state)
{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- I915_WRITE(FP0(crtc->pipe), crtc->config->dpll_hw_state.fp0);
- I915_WRITE(FP1(crtc->pipe), crtc->config->dpll_hw_state.fp1);
+ I915_WRITE(FP0(crtc->pipe), crtc_state->dpll_hw_state.fp0);
+ I915_WRITE(FP1(crtc->pipe), crtc_state->dpll_hw_state.fp1);
}
static void i9xx_crtc_enable(struct intel_crtc_state *pipe_config,
@@ -6127,7 +6128,7 @@ static void i9xx_crtc_enable(struct intel_crtc_state
*pipe_config,
if (WARN_ON(intel_crtc->active))
return;
- i9xx_set_pll_dividers(intel_crtc);
+ i9xx_set_pll_dividers(pipe_config);
if (intel_crtc_has_dp_encoder(intel_crtc->config))
intel_dp_set_m_n(intel_crtc, M1_N1);
@@ -6211,7 +6212,7 @@ static void i9xx_crtc_disable(struct intel_crtc_state
*old_crtc_state,
else if (IS_VALLEYVIEW(dev_priv))
vlv_disable_pll(dev_priv, pipe);
else
- i9xx_disable_pll(intel_crtc);
+ i9xx_disable_pll(old_crtc_state);
}
intel_encoders_post_pll_disable(crtc, old_crtc_state, old_state);
--
2.19.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
