On Mon, Oct 15, 2018 at 02:50:36PM -0700, Anusha Srivatsa wrote:
> If FEC is supported, the corresponding
> DP_TP_CTL register bits have to be configured.
>
> The driver has to program the FEC_ENABLE in DP_TP_CTL[30] register
> and wait till FEC_STATUS in DP_TP_CTL[28] is 1.
> Also add the warn message to make sure that the control
> register is already active while enabling FEC.
>
> v2:
> - Change commit message. Configure fec state after
> link training (Manasi, Gaurav)
> - Remove redundent checks (Manasi)
> - Remove the registers that get added automagically (Anusha)
>
> v3: s/intel_dp_set_fec_state()/intel_dp_enable_fec_state() (Gaurav)
>
> v4: rebased.
>
> Cc: Gaurav K Singh <gaurav.k.si...@intel.com>
> Cc: Jani Nikula <jani.nik...@linux.intel.com>
> Cc: Ville Syrjala <ville.syrj...@linux.intel.com>
> Cc: Manasi Navare <manasi.d.nav...@intel.com>
> Signed-off-by: Anusha Srivatsa <anusha.sriva...@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 2 ++
> drivers/gpu/drm/i915/intel_ddi.c | 2 ++
> drivers/gpu/drm/i915/intel_dp.c | 27 +++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_drv.h | 3 ++-
> 4 files changed, 33 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index bcde78bc0027..c8d7fdcd7823 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -9093,6 +9093,7 @@ enum skl_power_gate {
> #define _DP_TP_CTL_B 0x64140
> #define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, _DP_TP_CTL_B)
> #define DP_TP_CTL_ENABLE (1 << 31)
> +#define DP_TP_CTL_FEC_ENABLE (1 << 30)
> #define DP_TP_CTL_MODE_SST (0 << 27)
> #define DP_TP_CTL_MODE_MST (1 << 27)
> #define DP_TP_CTL_FORCE_ACT (1 << 25)
> @@ -9111,6 +9112,7 @@ enum skl_power_gate {
> #define _DP_TP_STATUS_A 0x64044
> #define _DP_TP_STATUS_B 0x64144
> #define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, _DP_TP_STATUS_B)
> +#define DP_TP_STATUS_FEC_ENABLE_LIVE (1 << 28)
> #define DP_TP_STATUS_IDLE_DONE (1 << 25)
> #define DP_TP_STATUS_ACT_SENT (1 << 24)
> #define DP_TP_STATUS_MODE_STATUS_MST (1 << 23)
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index f531900165bf..67c013ea4d39 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -2911,6 +2911,8 @@ static void intel_ddi_pre_enable_dp(struct
> intel_encoder *encoder,
> DP_DECOMPRESSION_EN);
> intel_dp_sink_set_fec_ready(intel_dp, crtc_state, DP_FEC_READY);
> intel_dp_start_link_train(intel_dp);
> + intel_dp_enable_fec_state(intel_dp, crtc_state);
> +
> if (port != PORT_A || INTEL_GEN(dev_priv) >= 9)
> intel_dp_stop_link_train(intel_dp);
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index b4e8af3142a2..b9f85502d9ff 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3017,6 +3017,33 @@ void intel_dp_sink_set_fec_ready(struct intel_dp
> *intel_dp,
> DRM_DEBUG_KMS("Failed to get FEC enabled in sink\n");
> }
>
> +void intel_dp_enable_fec_state(struct intel_dp *intel_dp,
> + const struct intel_crtc_state *crtc_state)
> +{
> + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> + enum port port = intel_dig_port->base.port;
> + u32 val;
> +
> + /* FEC support exists for DP 1.4 only */
> + if (intel_dp_is_edp(intel_dp))
> + return;
> +
> + /* If Display Compression is not enabled, FEC need not be configured */
> + if (!crtc_state->dsc_params.compression_enable)
> + return;
> +
> + val = I915_READ(DP_TP_CTL(port));
> + val |= DP_TP_CTL_FEC_ENABLE;
> + I915_WRITE(DP_TP_CTL(port), val);
> +
> + if (intel_wait_for_register(dev_priv, DP_TP_STATUS(port),
> + DP_TP_STATUS_FEC_ENABLE_LIVE,
> + DP_TP_STATUS_FEC_ENABLE_LIVE,
> + 1))
> + DRM_ERROR("Timed out waiting for FEC Enable Status\n");
I think in case of the error where we could not enable FEC,
we should also set the crtc_state->dsc_params.compression_enable = 0 since we
should not be enabling DSC without FEC enabled.
Jani/Anusha, thought?
Manasi
> +}
> +
> /* If the sink supports it, try to set the power state appropriately */
> void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
> {
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index fbc9fa06e8be..e51d612a9f42 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1532,7 +1532,6 @@ intel_encoder_current_mode(struct intel_encoder
> *encoder);
> bool intel_port_is_tc(struct drm_i915_private *dev_priv, enum port port);
> enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv,
> enum port port);
> -
> enum pipe intel_get_pipe_from_connector(struct intel_connector *connector);
> int intel_get_pipe_from_crtc_id_ioctl(struct drm_device *dev, void *data,
> struct drm_file *file_priv);
> @@ -1712,6 +1711,8 @@ void intel_dp_sink_set_decompression_state(struct
> intel_dp *intel_dp,
> void intel_dp_sink_set_fec_ready(struct intel_dp *intel_dp,
> const struct intel_crtc_state *crtc_state,
> int state);
> +void intel_dp_enable_fec_state(struct intel_dp *intel_dp,
> + const struct intel_crtc_state *crtc_state);
> void intel_dp_encoder_reset(struct drm_encoder *encoder);
> void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder);
> void intel_dp_encoder_destroy(struct drm_encoder *encoder);
> --
> 2.17.1
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
