On Mon, 29 Oct 2018, Anusha Srivatsa <anusha.sriva...@intel.com> wrote:
> The registers DPCSSS,DPSP,DPMLE1 and DPPMS are all at an offset
> from the base - which is the FLexi IO Adaptor. Lets follow the
> offset calculation while accessing these registers.
Why?
If I search the specs or i915_reg.h for, say, 0x1638c0 I'll find what
I'm looking for.
We generally don't follow this type of definitions for registers. We may
have some, but those are exceptions.
Please don't do this without some pretty good rationale written in the
commit message.
BR,
Jani.
>
> v2:
> - Follow spec for numbering - s/0/1(Lucas)
> - s/FIA_1/FIA1_BASE (Anusha)
>
> Cc: Lucas De Marchi <lucas.demar...@intel.com>
> Signed-off-by: Anusha Srivatsa <anusha.sriva...@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 15 +++++++++++----
> 1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index bcee91bcfba6..dd74bc01c64e 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -2057,8 +2057,15 @@ enum i915_power_well_id {
> #define BXT_PORT_CL2CM_DW6(phy) _BXT_PHY((phy),
> _PORT_CL2CM_DW6_BC)
> #define DW6_OLDO_DYN_PWR_DOWN_EN (1 << 28)
>
> +/* FIA Offsets */
> +#define FIA1_BASE 0x163000
> +#define PORT_TX_DFLEXDPMLE1_OFFSET 0x008C0
> +#define PORT_TX_DFLEXDPPMS_OFFSET 0x00890
> +#define PORT_TX_DFLEXDPCSSS_OFFSET 0x00894
> +#define PORT_TX_DFLEXDPSP_OFFSET 0x008A0
> +
> /* ICL PHY DFLEX registers */
> -#define PORT_TX_DFLEXDPMLE1 _MMIO(0x1638C0)
> +#define PORT_TX_DFLEXDPMLE1 _MMIO(FIA1_BASE +
> PORT_TX_DFLEXDPMLE1_OFFSET)
> #define DFLEXDPMLE1_DPMLETC_MASK(n) (0xf << (4 * (n)))
> #define DFLEXDPMLE1_DPMLETC(n, x) ((x) << (4 * (n)))
>
> @@ -10988,17 +10995,17 @@ enum skl_power_gate {
>
> _ICL_DSC1_RC_BUF_THRESH_1_UDW_PB, \
>
> _ICL_DSC1_RC_BUF_THRESH_1_UDW_PC)
>
> -#define PORT_TX_DFLEXDPSP _MMIO(0x1638A0)
> +#define PORT_TX_DFLEXDPSP _MMIO(FIA1_BASE +
> PORT_TX_DFLEXDPSP_OFFSET)
> #define TC_LIVE_STATE_TBT(tc_port) (1 << ((tc_port) * 8 + 6))
> #define TC_LIVE_STATE_TC(tc_port) (1 << ((tc_port) * 8 + 5))
> #define DP_LANE_ASSIGNMENT_SHIFT(tc_port) ((tc_port) * 8)
> #define DP_LANE_ASSIGNMENT_MASK(tc_port) (0xf << ((tc_port) * 8))
> #define DP_LANE_ASSIGNMENT(tc_port, x) ((x) << ((tc_port) * 8))
>
> -#define PORT_TX_DFLEXDPPMS _MMIO(0x163890)
> +#define PORT_TX_DFLEXDPPMS _MMIO(FIA1_BASE +
> PORT_TX_DFLEXDPPMS_OFFSET)
> #define DP_PHY_MODE_STATUS_COMPLETED(tc_port) (1 << (tc_port))
>
> -#define PORT_TX_DFLEXDPCSSS _MMIO(0x163894)
> +#define PORT_TX_DFLEXDPCSSS _MMIO(FIA1_BASE +
> PORT_TX_DFLEXDPCSSS_OFFSET)
> #define DP_PHY_MODE_STATUS_NOT_SAFE(tc_port) (1 << (tc_port))
>
> #endif /* _I915_REG_H_ */
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
