From: Ville Syrjälä <ville.syrj...@linux.intel.com>
The DMC firmware is confused and forces on the BIOS and debug
power well requests for PW1 and MISC IO on some platforms. On
BXT I measured this to waste about 10mW in the freeze system
suspend state with the SoC in s0. I didn't get conclusive
numbers for s0ix on account of the power consumption being
much more noisy than in s0.
This is pretty much undoing part of commit 42d9366d41a9
("drm/i915/gen9+: Don't remove secondary power well requests")
where we stopped sanitizing the DMCs bogus request bits.
Cc: Imre Deak <imre.d...@intel.com>
Cc: Rodrigo Vivi <rodrigo.v...@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
drivers/gpu/drm/i915/intel_runtime_pm.c | 35 +++++++++++++++++++++++--
1 file changed, 33 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c
b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 4350a5270423..6e349181dd1c 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -336,10 +336,17 @@ static void hsw_wait_for_power_well_disable(struct
drm_i915_private *dev_priv,
* Bspec doesn't require waiting for PWs to get disabled, but still do
* this for paranoia. The known cases where a PW will be forced on:
* - a KVMR request on any power well via the KVMR request register
- * - a DMC request on PW1 and MISC_IO power wells via the BIOS and
- * DEBUG request registers
+ * - a debug request on any power well via the DEBUG request register
* Skip the wait in case any of the request bits are set and print a
* diagnostic message.
+ *
+ * Note that DMC firmware will also force on the PW1 BIOS request
+ * on SKL-CNL, MISC_IO BIOS request on SKL-GLK (although MISC_IO
+ * does not even exits on BXT/GLK so the bit doesn't stick),
+ * and the PW1/MISC_IO debug request on BXT. We simply clear
+ * those spurious requests in hsw_power_well_disable() to make
+ * sure they don't waste power. Starting from ICL the DMC firmware
+ * has been fixed to only force on the PW1 driver request bit.
*/
wait_for((disabled = !(I915_READ(regs->driver) &
HSW_PWR_WELL_CTL_STATE(pw_idx))) ||
@@ -347,6 +354,11 @@ static void hsw_wait_for_power_well_disable(struct
drm_i915_private *dev_priv,
if (disabled)
return;
+ WARN(reqs & 3,
+ "%s left on (bios:%d driver:%d kvmr:%d debug:%d)\n",
+ power_well->desc->name,
+ !!(reqs & 1), !!(reqs & 2), !!(reqs & 4), !!(reqs & 8));
+
DRM_DEBUG_KMS("%s forced on (bios:%d driver:%d kvmr:%d debug:%d)\n",
power_well->desc->name,
!!(reqs & 1), !!(reqs & 2), !!(reqs & 4), !!(reqs & 8));
@@ -409,6 +421,7 @@ static void hsw_power_well_disable(struct drm_i915_private
*dev_priv,
struct i915_power_well *power_well)
{
const struct i915_power_well_regs *regs = power_well->desc->hsw.regs;
+ enum i915_power_well_id id = power_well->desc->id;
int pw_idx = power_well->desc->hsw.idx;
u32 val;
@@ -417,6 +430,24 @@ static void hsw_power_well_disable(struct drm_i915_private
*dev_priv,
val = I915_READ(regs->driver);
I915_WRITE(regs->driver, val & ~HSW_PWR_WELL_CTL_REQ(pw_idx));
+ /*
+ * On SKL-CNL DMC firmware forces on the BIOS request.
+ * This wastes a bit of power so clear it.
+ */
+ if (INTEL_GEN(dev_priv) < 11 &&
+ (id == SKL_DISP_PW_1 || id == SKL_DISP_PW_MISC_IO)) {
+ val = I915_READ(regs->bios);
+ I915_WRITE(regs->bios, val & ~HSW_PWR_WELL_CTL_REQ(pw_idx));
+ }
+ /*
+ * On BXT DMC firmware forces on the debug request.
+ * This wastes a bit of power so clear it.
+ */
+ if (IS_BROXTON(dev_priv) &&
+ (id == SKL_DISP_PW_1 || id == SKL_DISP_PW_MISC_IO)) {
+ val = I915_READ(regs->debug);
+ I915_WRITE(regs->debug, val & ~HSW_PWR_WELL_CTL_REQ(pw_idx));
+ }
hsw_wait_for_power_well_disable(dev_priv, power_well);
}
--
2.18.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
