On Tue, 2018-12-11 at 04:44 -0800, Souza, Jose wrote: > On Mon, 2018-12-10 at 22:51 -0800, Dhinakaran Pandiyan wrote: > > On Tue, 2018-12-04 at 15:00 -0800, José Roberto de Souza wrote: > > > The old debugfs fields was not following a naming partern and it > > > was > > > a bit confusing. > > > > > > So it went from: > > > ~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status > > > Sink_Support: yes > > > PSR mode: PSR1 > > > Enabled: yes > > > Busy frontbuffer bits: 0x000 > > > Main link in standby mode: no > > > HW Enabled & Active bit: yes > > > Source PSR status: 0x24050006 [SRDONACK] > > > > > > To: > > > ~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status > > > Sink support: yes [0x00000003] > > > Status: PSR1 enabled > > > Source PSR ctl: enabled [0x81f00e26] > > > Source PSR status: SRDENT [0x40040006] > > > Busy frontbuffer bits: 0x00000000 > > > > > > The 'Main link in standby mode' was removed as it is not useful > > > but > > > if needed by someone the information is still in the register > > > value > > > of 'Source PSR ctl' inside of the brackets, PSR mode and Enabled > > > was > > > squashed into Status, some renames and reorders and we have this > > > cleaner version. This will also make easy to parse debugfs for > > > IGT > > > tests. > > > > > > Cc: Rodrigo Vivi <rodrigo.v...@intel.com> > > > Cc: Dhinakaran Pandiyan <dhinakaran.pandi...@intel.com> > > > Suggested-by: Dhinakaran Pandiyan <dhinakaran.pandi...@intel.com> > > > Signed-off-by: José Roberto de Souza <jose.so...@intel.com> > > > --- > > > drivers/gpu/drm/i915/i915_debugfs.c | 96 +++++++++++++++------ > > > ---- > > > ---- > > > 1 file changed, 49 insertions(+), 47 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c > > > b/drivers/gpu/drm/i915/i915_debugfs.c > > > index 38dcee1ca062..86303ba02666 100644 > > > --- a/drivers/gpu/drm/i915/i915_debugfs.c > > > +++ b/drivers/gpu/drm/i915/i915_debugfs.c > > > @@ -2665,7 +2665,8 @@ > > > DEFINE_SHOW_ATTRIBUTE(i915_psr_sink_status); > > > static void > > > psr_source_status(struct drm_i915_private *dev_priv, struct > > > seq_file > > > *m) > > > { > > > - u32 val, psr_status; > > > + u32 val, status_val; > > > + const char *status = "unknown"; > > > > > > if (dev_priv->psr.psr2_enabled) { > > > static const char * const live_status[] = { > > > @@ -2681,14 +2682,11 @@ psr_source_status(struct drm_i915_private > > > *dev_priv, struct seq_file *m) > > > "BUF_ON", > > > "TG_ON" > > > }; > > > - psr_status = I915_READ(EDP_PSR2_STATUS); > > > - val = (psr_status & EDP_PSR2_STATUS_STATE_MASK) >> > > > - EDP_PSR2_STATUS_STATE_SHIFT; > > > - if (val < ARRAY_SIZE(live_status)) { > > > - seq_printf(m, "Source PSR status: 0x%x [%s]\n", > > > - psr_status, live_status[val]); > > > - return; > > > - } > > > + val = I915_READ(EDP_PSR2_STATUS); > > > + status_val = (val & EDP_PSR2_STATUS_STATE_MASK) >> > > > + EDP_PSR2_STATUS_STATE_SHIFT; > > > + if (status_val < ARRAY_SIZE(live_status)) > > > + status = live_status[status_val]; > > > } else { > > > static const char * const live_status[] = { > > > "IDLE", > > > @@ -2700,74 +2698,78 @@ psr_source_status(struct drm_i915_private > > > *dev_priv, struct seq_file *m) > > > "SRDOFFACK", > > > "SRDENT_ON", > > > }; > > > - psr_status = I915_READ(EDP_PSR_STATUS); > > > - val = (psr_status & EDP_PSR_STATUS_STATE_MASK) >> > > > - EDP_PSR_STATUS_STATE_SHIFT; > > > - if (val < ARRAY_SIZE(live_status)) { > > > - seq_printf(m, "Source PSR status: 0x%x [%s]\n", > > > - psr_status, live_status[val]); > > > - return; > > > - } > > > + val = I915_READ(EDP_PSR_STATUS); > > > + status_val = (val & EDP_PSR_STATUS_STATE_MASK) >> > > > + EDP_PSR_STATUS_STATE_SHIFT; > > > + if (status_val < ARRAY_SIZE(live_status)) > > > + status = live_status[status_val]; > > > } > > > > > > - seq_printf(m, "Source PSR status: 0x%x [%s]\n", psr_status, > > > "unknown"); > > > + seq_printf(m, "Source PSR status: %s [0x%08x]\n", status, val); > > > } > > > > > > static int i915_edp_psr_status(struct seq_file *m, void *data) > > > { > > > struct drm_i915_private *dev_priv = node_to_i915(m->private); > > > - u32 psrperf = 0; > > > - bool enabled = false; > > > - bool sink_support; > > > + struct i915_psr *psr = &dev_priv->psr; > > > + const char *status; > > > + bool enabled; > > > + u32 val; > > > > > > if (!HAS_PSR(dev_priv)) > > > return -ENODEV; > > > > > > - sink_support = dev_priv->psr.sink_support; > > > - seq_printf(m, "Sink_Support: %s\n", yesno(sink_support)); > > > - if (!sink_support) > > > + seq_printf(m, "Sink support: %s", yesno(psr->sink_support)); > > > + if (!psr->sink_support) { > > > + seq_puts(m, "\n"); > > > return 0; > > > + } > > > > > > intel_runtime_pm_get(dev_priv); > > > + mutex_lock(&psr->lock); > > > > > > - mutex_lock(&dev_priv->psr.lock); > > > - seq_printf(m, "PSR mode: %s\n", > > > - dev_priv->psr.psr2_enabled ? "PSR2" : "PSR1"); > > > - seq_printf(m, "Enabled: %s\n", yesno(dev_priv->psr.enabled)); > > > - seq_printf(m, "Busy frontbuffer bits: 0x%03x\n", > > > - dev_priv->psr.busy_frontbuffer_bits); > > > + seq_printf(m, " [0x%08x]\n", psr->dp->psr_dpcd[0]); > > > > This can be moved closer to where "Sink support" is printed. > > Also, the > > extra zeroes that get printed due to "%08x" look odd, please > > consider > > changing it to "%02x". > > Done > > > > > > > > > - if (dev_priv->psr.psr2_enabled) > > > - enabled = I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE; > > > + if (psr->enabled) > > > + status = psr->psr2_enabled ? "PSR2 enabled" : "PSR1 > > > enabled"; > > > else > > > - enabled = I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE; > > > + status = "disabled"; > > > + seq_printf(m, "Status: %s\n", status); > > > > Can we just use the ctl field and get rid of this? This status and > > and > > the one below can be confusing to those not familiar with the code > > base. > > > > We should be able to parse all the information we need from two > > lines > > Source PSR ctl: [PSR1,PSR2] enabled <reg value> > > Source PSR status: <state> <reg value> > > I'm fine in having just one but when there is frontbuffer > modifications > Status is kept as enabled and Source PSR ctl and Source PSR status > are > set to idle states,
That is a good point - psr_invalidate() would disable the feature in hardware but the driver state is enabled. I guess, you could change "Status" to "PSR mode"/"Feature state". ... PSR mode: {PSR1 enabled, PSR2 enabled, disabled} Source PSR ctl: {enabled, disabled} ... Source PSR status: ... ... Is this better? Also, it might be worth printing the "PSR mode:" line even when there is no sink_support. It's an useful piece of debug information and doesn't access the hardware. > we know that but those not familiar with the code > could think it is disabled but it usualy happen so fast that I guess > it > is not a problem. > > And when PSR is disabled we print something else other than Sink > support? > > > > > > > > > > > > > - seq_printf(m, "Main link in standby mode: %s\n", > > > - yesno(dev_priv->psr.link_standby)); > > > + if (!psr->enabled) > > > + goto unlock; > > > > > > - seq_printf(m, "HW Enabled & Active bit: %s\n", yesno(enabled)); > > > + if (psr->psr2_enabled) { > > > + val = I915_READ(EDP_PSR2_CTL); > > > + enabled = val & EDP_PSR2_ENABLE; > > > + } else { > > > + val = I915_READ(EDP_PSR_CTL); > > > + enabled = val & EDP_PSR_ENABLE; > > > + } > > > + seq_printf(m, "Source PSR ctl: %s [0x%08x]\n", > > > + enableddisabled(enabled), val); > > > + psr_source_status(dev_priv, m); > > > + seq_printf(m, "Busy frontbuffer bits: 0x%08x\n", > > > + psr->busy_frontbuffer_bits); > > > > > > /* > > > * SKL+ Perf counter is reset to 0 everytime DC state is > > > entered > > > */ > > > if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) { > > > - psrperf = I915_READ(EDP_PSR_PERF_CNT) & > > > - EDP_PSR_PERF_CNT_MASK; > > > - > > > - seq_printf(m, "Performance_Counter: %u\n", psrperf); > > > + val = I915_READ(EDP_PSR_PERF_CNT) & > > > EDP_PSR_PERF_CNT_MASK; > > > + seq_printf(m, "Performance counter: %u\n", val); > > > } > > > > > > - psr_source_status(dev_priv, m); > > > - mutex_unlock(&dev_priv->psr.lock); > > > - > > > - if (READ_ONCE(dev_priv->psr.debug) & I915_PSR_DEBUG_IRQ) { > > > + if (psr->debug & I915_PSR_DEBUG_IRQ) { > > > seq_printf(m, "Last attempted entry at: %lld\n", > > > - dev_priv->psr.last_entry_attempt); > > > - seq_printf(m, "Last exit at: %lld\n", > > > - dev_priv->psr.last_exit); > > > + psr->last_entry_attempt); > > > + seq_printf(m, "Last exit at: %lld\n", psr->last_exit); > > > } > > > > > > +unlock: > > > + mutex_unlock(&psr->lock); > > > intel_runtime_pm_put(dev_priv); > > > + > > > return 0; > > > } > > > _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx