>-----Original Message-----
>From: Roper, Matthew D
>Sent: Saturday, January 12, 2019 4:30 AM
>To: Shankar, Uma <uma.shan...@intel.com>
>Cc: intel-gfx@lists.freedesktop.org; Lankhorst, Maarten
><maarten.lankho...@intel.com>; Syrjala, Ville <ville.syrj...@intel.com>;
>Sharma,
>Shashank <shashank.sha...@intel.com>
>Subject: Re: [v5 5/6] drm/i915/icl: Enable ICL Pipe CSC block
>
>On Tue, Jan 08, 2019 at 01:07:32PM +0530, Uma Shankar wrote:
>> Enable ICL pipe csc hardware. CSC block is enabled in CSC_MODE
>> register instead of PLANE_COLOR_CTL.
>>
>> ToDO: Extend the ABI to accept 32 bit coefficient values instead of
>> 16bit for future platforms.
>>
>> v2: Addressed Maarten's review comments.
>>
>> v3: Addressed Matt's review comments. Removed rmw patterns as
>> suggested by Matt.
>>
>> v4: Addressed Matt's review comments.
>>
>> v5: Addressed Ville's review comments.
>>
>> Signed-off-by: Uma Shankar <uma.shan...@intel.com>
>> ---
>> drivers/gpu/drm/i915/i915_reg.h | 10 +++++++---
>> drivers/gpu/drm/i915/intel_color.c | 12 ++++++++++--
>> 2 files changed, 17 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_reg.h
>> b/drivers/gpu/drm/i915/i915_reg.h index f29eef7..5a262c0 100644
>> --- a/drivers/gpu/drm/i915/i915_reg.h
>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>> @@ -9861,10 +9861,14 @@ enum skl_power_gate {
>> #define _PIPE_A_CSC_COEFF_BU 0x4901c
>> #define _PIPE_A_CSC_COEFF_RV_GV 0x49020
>> #define _PIPE_A_CSC_COEFF_BV 0x49024
>> +
>> #define _PIPE_A_CSC_MODE 0x49028
>> -#define CSC_BLACK_SCREEN_OFFSET (1 << 2)
>> -#define CSC_POSITION_BEFORE_GAMMA (1 << 1)
>> -#define CSC_MODE_YUV_TO_RGB (1 << 0)
>> +#define ICL_CSC_ENABLE (1 << 31)
>> +#define ICL_OUTPUT_CSC_ENABLE (1 << 30)
>> +#define CSC_BLACK_SCREEN_OFFSET (1 << 2)
>> +#define CSC_POSITION_BEFORE_GAMMA (1 << 1)
>> +#define CSC_MODE_YUV_TO_RGB (1 << 0)
>> +
>> #define _PIPE_A_CSC_PREOFF_HI 0x49030
>> #define _PIPE_A_CSC_PREOFF_ME 0x49034
>> #define _PIPE_A_CSC_PREOFF_LO 0x49038
>> diff --git a/drivers/gpu/drm/i915/intel_color.c
>> b/drivers/gpu/drm/i915/intel_color.c
>> index 9cd4646..c3e4ff6 100644
>> --- a/drivers/gpu/drm/i915/intel_color.c
>> +++ b/drivers/gpu/drm/i915/intel_color.c
>> @@ -134,7 +134,11 @@ static void ilk_load_ycbcr_conversion_matrix(struct
>intel_crtc *crtc)
>> I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), POSTOFF_RGB_TO_YUV_HI);
>> I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe),
>POSTOFF_RGB_TO_YUV_ME);
>> I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), POSTOFF_RGB_TO_YUV_LO);
>> - I915_WRITE(PIPE_CSC_MODE(pipe), 0);
>> +
>> + if (INTEL_GEN(dev_priv) >= 11)
>> + I915_WRITE(PIPE_CSC_MODE(pipe),
>ICL_OUTPUT_CSC_ENABLE);
>
>For gen11+, shouldn't we be programming OUTPUT_CSC_COEFF instead of
>CSC_COEFF if we set this bit?
Yeah you are right, ideally output CSC coeff should be programmed to utilize
this.
Will add that support.
>> + else
>> + I915_WRITE(PIPE_CSC_MODE(pipe), 0);
>> }
>>
>> static void ilk_load_csc_matrix(struct intel_crtc_state *crtc_state)
>> @@ -242,7 +246,10 @@ static void ilk_load_csc_matrix(struct intel_crtc_state
>*crtc_state)
>> I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
>> I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
>>
>> - I915_WRITE(PIPE_CSC_MODE(pipe), 0);
>> + if (INTEL_GEN(dev_priv) >= 11)
>> + I915_WRITE(PIPE_CSC_MODE(pipe), ICL_CSC_ENABLE);
>> + else
>> + I915_WRITE(PIPE_CSC_MODE(pipe), 0);
>
>I might be misinterpreting how the hardware works, but my impression was that
>we had two distinct CSC units now on gen11+. So we could use the traditional
>CSC registers to hold the userspace-provided CTM and the new output CSC
>registers to hold the fixed RGB->YUV matrix, and they could both be used at the
>same time if necessary. It looks like this function is still assuming that
>the two are
>mutually exclusive and that if we need RGB->YUV we never bother programming
>the userspace matrix. Is that intentional or an oversight? Aside from the
>register
>definitions themselves, the bspec seems to be pretty sparse on how the whole
>pipeline goes together...
Ideally both CSC blocks can co-exist, current design is indeed limiting this.
Will modify
to handle this properly.
Regards,
Uma Shankar
>
>Matt
>
>> } else {
>> uint32_t mode = CSC_MODE_YUV_TO_RGB;
>>
>> @@ -700,6 +707,7 @@ void intel_color_init(struct intel_crtc *crtc)
>> dev_priv->display.load_csc_matrix = ilk_load_csc_matrix;
>> dev_priv->display.load_luts = glk_load_luts;
>> } else if (IS_ICELAKE(dev_priv)) {
>> + dev_priv->display.load_csc_matrix = ilk_load_csc_matrix;
>> dev_priv->display.load_luts = icl_load_luts;
>> } else {
>> dev_priv->display.load_luts = i9xx_load_luts;
>> --
>> 1.9.1
>>
>
>--
>Matt Roper
>Graphics Software Engineer
>IoTG Platform Enabling & Development
>Intel Corporation
>(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
