By the time skl_ddi_clock_get() is called - and thus
skl_calc_wrpll_link() - we've just got the hw state from the pll
registers. We don't need to read them again: we can rather reuse what
was cached in the dpll_hw_state.
v2: rename state variable to pll_state, make argument const in
skl_calc_wrpll_link() and remove not useful warning (from Ville)
Signed-off-by: Lucas De Marchi <lucas.demar...@intel.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 50 ++++++++++++++------------------
1 file changed, 21 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 933df3a57a8a..15f143c2ed6e 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1240,24 +1240,15 @@ static int hsw_ddi_calc_wrpll_link(struct
drm_i915_private *dev_priv,
return (refclk * n * 100) / (p * r);
}
-static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv,
- enum intel_dpll_id pll_id)
+static int skl_calc_wrpll_link(const struct intel_dpll_hw_state *pll_state)
{
- i915_reg_t cfgcr1_reg, cfgcr2_reg;
- u32 cfgcr1_val, cfgcr2_val;
u32 p0, p1, p2, dco_freq;
- cfgcr1_reg = DPLL_CFGCR1(pll_id);
- cfgcr2_reg = DPLL_CFGCR2(pll_id);
+ p0 = pll_state->cfgcr2 & DPLL_CFGCR2_PDIV_MASK;
+ p2 = pll_state->cfgcr2 & DPLL_CFGCR2_KDIV_MASK;
- cfgcr1_val = I915_READ(cfgcr1_reg);
- cfgcr2_val = I915_READ(cfgcr2_reg);
-
- p0 = cfgcr2_val & DPLL_CFGCR2_PDIV_MASK;
- p2 = cfgcr2_val & DPLL_CFGCR2_KDIV_MASK;
-
- if (cfgcr2_val & DPLL_CFGCR2_QDIV_MODE(1))
- p1 = (cfgcr2_val & DPLL_CFGCR2_QDIV_RATIO_MASK) >> 8;
+ if (pll_state->cfgcr2 & DPLL_CFGCR2_QDIV_MODE(1))
+ p1 = (pll_state->cfgcr2 & DPLL_CFGCR2_QDIV_RATIO_MASK) >> 8;
else
p1 = 1;
@@ -1292,10 +1283,11 @@ static int skl_calc_wrpll_link(struct drm_i915_private
*dev_priv,
break;
}
- dco_freq = (cfgcr1_val & DPLL_CFGCR1_DCO_INTEGER_MASK) * 24 * 1000;
+ dco_freq = (pll_state->cfgcr1 & DPLL_CFGCR1_DCO_INTEGER_MASK)
+ * 24 * 1000;
- dco_freq += (((cfgcr1_val & DPLL_CFGCR1_DCO_FRACTION_MASK) >> 9) * 24 *
- 1000) / 0x8000;
+ dco_freq += (((pll_state->cfgcr1 & DPLL_CFGCR1_DCO_FRACTION_MASK) >> 9)
+ * 24 * 1000) / 0x8000;
if (WARN_ON(p0 == 0 || p1 == 0 || p2 == 0))
return 0;
@@ -1544,22 +1536,22 @@ static void cnl_ddi_clock_get(struct intel_encoder
*encoder,
}
static void skl_ddi_clock_get(struct intel_encoder *encoder,
- struct intel_crtc_state *pipe_config)
+ struct intel_crtc_state *pipe_config)
{
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
- int link_clock = 0;
- u32 dpll_ctl1;
- enum intel_dpll_id pll_id;
-
- pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
+ struct intel_dpll_hw_state *pll_state;
+ int link_clock;
- dpll_ctl1 = I915_READ(DPLL_CTRL1);
+ /*
+ * ctrl1 register is already shifted for each pll, just use 0 to get
+ * the internal shift for each field
+ */
+ pll_state = &pipe_config->dpll_hw_state;
- if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(pll_id)) {
- link_clock = skl_calc_wrpll_link(dev_priv, pll_id);
+ if (pll_state->ctrl1 & DPLL_CTRL1_HDMI_MODE(0)) {
+ link_clock = skl_calc_wrpll_link(pll_state);
} else {
- link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(pll_id);
- link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(pll_id);
+ link_clock = pll_state->ctrl1 & DPLL_CTRL1_LINK_RATE_MASK(0);
+ link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(0);
switch (link_clock) {
case DPLL_CTRL1_LINK_RATE_810:
--
2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
