On Wed, 6 Mar 2013 20:10:42 +0100
Daniel Vetter <dan...@ffwll.ch> wrote:
> On Wed, Mar 06, 2013 at 10:33:34AM -0800, Jesse Barnes wrote:
> > On Wed, 6 Mar 2013 20:28:07 +0200
> > Ville Syrjälä <ville.syrj...@linux.intel.com> wrote:
> >
> > > On Fri, Mar 01, 2013 at 02:08:31PM -0800, Jesse Barnes wrote:
> > > > We could split this out into a separate routine at some point as an
> > > > optimization.
> > >
> > > BTW did anyone try to gang wakeup thing instead?
> >
> > Not afaik.
> >
> > >
> > > >
> > > > Signed-off-by: Jesse Barnes <jbar...@virtuousgeek.org>
> > > > ---
> > > > drivers/gpu/drm/i915/i915_reg.h | 2 ++
> > > > drivers/gpu/drm/i915/intel_pm.c | 11 ++++++++---
> > > > 2 files changed, 10 insertions(+), 3 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > > > b/drivers/gpu/drm/i915/i915_reg.h
> > > > index 1c6e066..558c6d1 100644
> > > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > > @@ -4271,6 +4271,8 @@
> > > > #define FORCEWAKE 0xA18C
> > > > #define FORCEWAKE_VLV 0x1300b0
> > > > #define FORCEWAKE_ACK_VLV 0x1300b4
> > > > +#define FORCEWAKE_MEDIA_VLV 0x1300b8
> > > > +#define FORCEWAKE_ACK_MEDIA_VLV 0x1300bc
> > > > #define FORCEWAKE_ACK_HSW 0x130044
> > > > #define FORCEWAKE_ACK 0x130090
> > > > #define VLV_GTLC_WAKE_CTRL 0x130090
> > > > diff --git a/drivers/gpu/drm/i915/intel_pm.c
> > > > b/drivers/gpu/drm/i915/intel_pm.c
> > > > index 3e976f4..e3947cb 100644
> > > > --- a/drivers/gpu/drm/i915/intel_pm.c
> > > > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > > > @@ -4423,10 +4423,15 @@ static void vlv_force_wake_get(struct
> > > > drm_i915_private *dev_priv)
> > > > DRM_ERROR("Timed out waiting for forcewake old ack to
> > > > clear.\n");
> > > >
> > > > I915_WRITE_NOTRACE(FORCEWAKE_VLV,
> > > > _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL));
> > > > + I915_WRITE_NOTRACE(FORCEWAKE_MEDIA_VLV,
> > > > _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL));
> > > >
> > > > if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1),
> > > > FORCEWAKE_ACK_TIMEOUT_MS))
> > > > - DRM_ERROR("Timed out waiting for forcewake to ack
> > > > request.\n");
> > > > + DRM_ERROR("Timed out waiting for GT to ack forcewake
> > > > request.\n");
> > > > +
> > > > + if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK_MEDIA_VLV)
> > > > & 1),
> > > > + FORCEWAKE_ACK_TIMEOUT_MS))
> > > > + DRM_ERROR("Timed out waiting for media to ack forcewake
> > > > request.\n");
> > >
> > > Based on some of my recent patches the '& 1's should be
> > > '& FORCEWAKE_KERNEL'.
> >
> > And that was based on my misunderstanding of MT forcewake. I thought
> > it was so the BIOS or AMT could do forcewake, but it's actually meant
> > for multiple kernel thread accesses. Since we don't do that, simply
> > using the lowest bit all the time is fine.
>
> You're a bit outdated, we now use that facility. It's the only way to pull
> off the forcewake dance required to get scanline waits working on gen7. So
> I guess the same applies for vlv ...
Ah ok, I'll fix this up then.
--
Jesse Barnes, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
