On Fri, 05 Apr 2019, Rodrigo Vivi <rodrigo.v...@intel.com> wrote:
> On Fri, Apr 05, 2019 at 10:52:20AM +0300, Jani Nikula wrote:
>> Commit 7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config fast
>> and narrow") started to optize the eDP 1.4+ link config, both per spec
>> and as preparation for display stream compression support.
>>
>> Sadly, we again face panels that flat out fail with parameters they
>> claim to support. Revert, and go back to the drawing board.
>>
>> v2: Actually revert to max params instead of just wide-and-slow.
>>
>> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109959
>> Fixes: 7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config fast and
>> narrow")
>> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
>> Cc: Manasi Navare <manasi.d.nav...@intel.com>
>> Cc: Rodrigo Vivi <rodrigo.v...@intel.com>
>> Cc: Matt Atwood <matthew.s.atw...@intel.com>
>> Cc: "Lee, Shawn C" <shawn.c....@intel.com>
>> Cc: Dave Airlie <airl...@gmail.com>
>> Cc: intel-gfx@lists.freedesktop.org
>> Cc: <sta...@vger.kernel.org> # v5.0+
>> Signed-off-by: Jani Nikula <jani.nik...@intel.com>
>
> I can hear from here your "I told you so"... Sorry!
>
> Reviewed-by: Rodrigo Vivi <rodrigo.v...@intel.com>
Thanks, pushed, please cherry-pick this for drm-intel-fixes.
BR,
Jani.
>
>> ---
>> drivers/gpu/drm/i915/intel_dp.c | 69 +++++----------------------------
>> 1 file changed, 10 insertions(+), 59 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_dp.c
>> b/drivers/gpu/drm/i915/intel_dp.c
>> index 72c490..dfa770 100644
>> --- a/drivers/gpu/drm/i915/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>> @@ -1856,42 +1856,6 @@ intel_dp_compute_link_config_wide(struct intel_dp
>> *intel_dp,
>> return -EINVAL;
>> }
>>
>> -/* Optimize link config in order: max bpp, min lanes, min clock */
>> -static int
>> -intel_dp_compute_link_config_fast(struct intel_dp *intel_dp,
>> - struct intel_crtc_state *pipe_config,
>> - const struct link_config_limits *limits)
>> -{
>> - struct drm_display_mode *adjusted_mode =
>> &pipe_config->base.adjusted_mode;
>> - int bpp, clock, lane_count;
>> - int mode_rate, link_clock, link_avail;
>> -
>> - for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 * 3) {
>> - mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock,
>> - bpp);
>> -
>> - for (lane_count = limits->min_lane_count;
>> - lane_count <= limits->max_lane_count;
>> - lane_count <<= 1) {
>> - for (clock = limits->min_clock; clock <=
>> limits->max_clock; clock++) {
>> - link_clock = intel_dp->common_rates[clock];
>> - link_avail = intel_dp_max_data_rate(link_clock,
>> - lane_count);
>> -
>> - if (mode_rate <= link_avail) {
>> - pipe_config->lane_count = lane_count;
>> - pipe_config->pipe_bpp = bpp;
>> - pipe_config->port_clock = link_clock;
>> -
>> - return 0;
>> - }
>> - }
>> - }
>> - }
>> -
>> - return -EINVAL;
>> -}
>> -
>> static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8
>> dsc_max_bpc)
>> {
>> int i, num_bpc;
>> @@ -2028,15 +1992,13 @@ intel_dp_compute_link_config(struct intel_encoder
>> *encoder,
>> limits.min_bpp = 6 * 3;
>> limits.max_bpp = intel_dp_compute_bpp(intel_dp, pipe_config);
>>
>> - if (intel_dp_is_edp(intel_dp) && intel_dp->edp_dpcd[0] < DP_EDP_14) {
>> + if (intel_dp_is_edp(intel_dp)) {
>> /*
>> * Use the maximum clock and number of lanes the eDP panel
>> - * advertizes being capable of. The eDP 1.3 and earlier panels
>> - * are generally designed to support only a single clock and
>> - * lane configuration, and typically these values correspond to
>> - * the native resolution of the panel. With eDP 1.4 rate select
>> - * and DSC, this is decreasingly the case, and we need to be
>> - * able to select less than maximum link config.
>> + * advertizes being capable of. The panels are generally
>> + * designed to support only a single clock and lane
>> + * configuration, and typically these values correspond to the
>> + * native resolution of the panel.
>> */
>> limits.min_lane_count = limits.max_lane_count;
>> limits.min_clock = limits.max_clock;
>> @@ -2050,22 +2012,11 @@ intel_dp_compute_link_config(struct intel_encoder
>> *encoder,
>> intel_dp->common_rates[limits.max_clock],
>> limits.max_bpp, adjusted_mode->crtc_clock);
>>
>> - if (intel_dp_is_edp(intel_dp))
>> - /*
>> - * Optimize for fast and narrow. eDP 1.3 section 3.3 and eDP 1.4
>> - * section A.1: "It is recommended that the minimum number of
>> - * lanes be used, using the minimum link rate allowed for that
>> - * lane configuration."
>> - *
>> - * Note that we use the max clock and lane count for eDP 1.3 and
>> - * earlier, and fast vs. wide is irrelevant.
>> - */
>> - ret = intel_dp_compute_link_config_fast(intel_dp, pipe_config,
>> - &limits);
>> - else
>> - /* Optimize for slow and wide. */
>> - ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config,
>> - &limits);
>> + /*
>> + * Optimize for slow and wide. This is the place to add alternative
>> + * optimization policy.
>> + */
>> + ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config, &limits);
>>
>> /* enable compression if the mode doesn't fit available BW */
>> DRM_DEBUG_KMS("Force DSC en = %d\n", intel_dp->force_dsc_en);
>> --
>> 2.20.1
>>
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
